Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Shower Replacement Cost in Orlando?
A full shower replacement in Orlando typically runs between $3,000 and $8,500 in 2026, with most homeowners landing around $5,200 for a standard 60-inch alcove unit with mid-grade tile and fixtures. Walk-in conversions with custom glass, bench seating, and niche shelving push the top of that range. The two biggest variables are the size of the shower footprint and whether you’re swapping out a prefabricated unit or doing a full custom tile build.
What you’re actually paying for: demolition and haul-away of the old shower, waterproofing and backer board (this is not a corner you want cut in Florida humidity), tile or wall surround, the shower pan or base, the valve and trim, plus drywall, paint, and plumbing adjustments. We’ll break down each line item below so you know exactly where the money goes before you ever pick up the phone.
Shower Replacement Cost Breakdown (2026)
Here’s what a typical Orlando shower replacement looks like line by line. These numbers reflect what we’re seeing across Orange County in 2026, from College Park to Lake Nona. Note that a prefab unit swap lands on the low end; a fully custom tile shower with fixtures from Kohler or Mohen lands on the high end.
| Line Item | Orlando Price Range | Notes |
|---|---|---|
| Demolition & disposal | $250 – $650 | Removing old shower, pan, drywall; includes haul-away |
| Waterproofing & backer board | $400 – $1,100 | Schluter or equivalent membrane system; non-negotiable in Florida’s climate |
| Shower pan / base | $300 – $1,400 | Prefab acrylic pan ($300 – $600) vs. custom mortared tile pan ($800 – $1,400) |
| Wall surround or tile | $900 – $3,400 | Acrylic surround vs. ceramic vs. large-format porcelain vs. natural stone |
| Shower valve, trim & head | $250 – $1,200 | Pressure-balancing valve ($250 – $450) to full thermostatic with rainfall head and wand ($800 – $1,200) |
| Glass enclosure or door | $500 – $2,200 | Standard sliding door vs. frameless custom glass; frameless is the single biggest visual upgrade |
| Drywall, paint, plumbing adjust | $400 – $1,300 | Wall prep, moving supply lines if fixture relocation is needed, finish work |
| Total | $3,000 – $8,500 | Most Orlando projects cluster at $4,500 – $6,500 |
What Drives the Price Up or Down
Size is the first driver. A 32-inch corner shower is a different animal than a 60-inch double-wide with two heads and a bench. Second is the wall system: a three-piece acrylic surround costs a fraction of a full porcelain-tile install with a Schluter strip (the metal trim that seals the edge where tile meets flooring or drywall). Third is glass. Going from a curtain rod to a frameless custom glass panel can add $1,500 to $2,200 on its own. Fourth is the waterproofing method, and this is non-negotiable in Orlando’s summer humidity: a proper surface-applied membrane or foam tray system costs more than old-school green board and mortar, but it’s the difference between a shower that lasts 5 years and one that lasts 25.
What Affects Shower Replacement Pricing in Orlando
- Square footage of the shower footprint: Every additional foot in length or width adds tile, waterproofing, and base material. A 36″ x 36″ stall is the entry point; a 60″ x 36″ alcove is the most common replacement in Conway and Colonialtown. A double-shower with two valves in a Dr. Phillips master bath can double the base price.
- Whether you’re replacing a tub with a shower: A tub-to-shower conversion in Orlando runs $3,500 – $10,000, which overlaps shower replacement but includes the extra cost of demoing the tub, refinishing the floor where the tub sat, and often relocating the drain line. If you have a 3′ x 5′ tub alcove, that footprint converts to a shower nicely with minimal plumbing surgery.
- Wall material choice: Acrylic or fiberglass surround ($900 – $1,800 installed) vs. ceramic tile ($2,000 – $3,400) vs. large-format porcelain or stone ($2,800 – $4,200). Tile choices ripple outward: heavier tile may require additional substrate support, and natural stone needs sealing every few years in Florida’s hard water.
- Valve and fixture grade: A $90 builder-grade valve won’t maintain temperature if someone flushes a toilet. A pressure-balancing or thermostatic valve from Mohen or Kohler costs $250 – $800 but functions properly for a decade. Add a rainfall head, body wand, or hand spray, and you’re adding $200 – $600 per fixture.
- Access issues and older homes: Orlando homes built before 1990 often have cast-iron drains that need either cleaning out or replacement at the P-trap when the shower comes out. That’s a $200 – $600 line item nobody plans for until the old unit is out of the wall. Homes in Thornton Park and Delaney Park built in the 1920s – 1940s are the most likely to see this.
- Glass enclosure style: A $500 framed sliding door is functionally fine. A $2,200 frameless custom panel with a water-break profile changes the entire look of the bathroom and is one of the most requested upgrades in Winter Park and Baldwin Park. This is one area where spending more changes how you live in the space daily.
Is It Cheaper to Repair or Replace a Shower in Orlando?
If the issue is a single cracked tile, a failing valve, or a leaking drain, a repair runs $150 – $800. If the problem is moisture behind the wall or a cracking shower pan, replacement is usually the honest answer: once water reaches the framing in central Florida’s climate, mold and wood rot follow fast, and a patch won’t stop what’s already behind the tile. A good rule of thumb: when repair costs pass 40% of the replacement price, replace. If you’re not sure, call us and describe what you’re seeing. We’ll tell you straight whether a repair is worth doing.
How to Save on Shower Replacement
You don’t have to spend $8,500 to get a shower that looks sharp and functions perfectly. Here’s where Orlando homeowners can trim cost without trimming quality.
- Keep the existing footprint. Moving a drain or a wall is where plumbing costs climb. If the shower stays where it is, you’ve already dodged $500 – $1,500 in rough-in work. Most showers don’t actually need to move; they need better materials.
- Choose porcelain over natural stone. Large-format porcelain tile delivers the stone look at half the material cost and needs zero sealing. The difference in installed price is roughly $800 – $1,600 on an average alcove. Nobody who owns it will know unless you tell them.
- Skip the second valve. A second shower head or body wand is $400 – $1,000 in plumbing and fixture cost. If only one person uses the shower at a time, one rainfall head with a hand spray built in is enough.
- Use a prefab pan instead of a custom tile pan. A quality acrylic or cast composite pan costs $300 – $600 and installs in an hour. Custom tile pans cost more and add a full day of labor plus cure time. For most Orlando homes, a quality prefab pan with a tile surround looks and functions great.
- Time it before it becomes an emergency. When a shower pan leaks into the living room ceiling, you’re paying for drywall, paint, and emergency scheduling on top of the replacement. Planning the project a few weeks out gives you access to better material pricing and no rush fees. Call (850) 920-7745 and we’ll walk you through what’s available.
Is Shower Replacement Covered by Insurance in Florida?
Usually not. Homeowners insurance in Florida covers sudden, accidental damage from things like a pipe burst or a tree through the roof. A shower that’s old, tired, or leaking due to age and deferred maintenance is a replacement the homeowner covers. If the leak is tied to a covered water event (a burst supply line, for example), some policies will pay for the water damage but not the shower itself. It’s worth a call to your adjuster before you schedule. We’ve also seen policies with high deductibles in central Florida (typically 1% of the home’s insured value) that make a claim pointless anyway. Ask us about documentation if your shower replacement is tied to any kind of claim; we’ll help you get the paperwork you need.
How Long Does Shower Replacement Take?
Plan for 2 to 5 working days for a standard alcove replacement in Orlando. Day one is demo and the waterproofing system. Day two is pan installation, tile or surround, and valve installation. Day three is likely grout, glass enclosure measuring, and trim out. Frameless glass usually needs 4 to 7 days after measurement to come back from the fabricator. Some custom tile showers with bench seats and niches add a day or two. Of course, if we open the wall and find cast-iron drain issues or rotted framing (common in pre-1990 Orlando homes), that conversation happens immediately with a clear change order and a number added in writing.
Who Is Coming to Your Home?
This is the question we’d want answered if someone were working in our own home. Every crew member who arrives at your Orlando home from Mason Remodeling Co Orlando has passed the Threshold Standard: background check, identity verification, clean marked uniform, and a photo ID badge they’ll present at your door. Before the visit, you’ll receive the technician’s name and photo so you know exactly who you’re opening the door for. Isaac Pruett leads our Orlando team and walks every project personally. You won’t be surprised by a name you didn’t request or a face you didn’t approve. That’s how we’ve operated since 2004 as part of the Threshold Group family of home-service companies, and that policy has never changed.
Why Material Choice Matters in Orlando’s Climate
Central Florida’s summer humidity is hard on shower materials. A properly waterproofed shower in Orlando isn’t a nice-to-have; it’s a structural requirement. We use specification-grade materials from partners like Cambria, Silestone, Kohler, Mohen, and Toto because they hold up to Florida humidity and hard water better than the imported bargain brands that warp, discolor, and fail at the corners. When you look at a grout line in a shower that’s three years old in Orlando, the difference between builder-grade and specification-grade is the difference between staining black and wiping clean. The gap in material cost is real, but it’s small compared to the cost of re-doing the job in year five. This is one place where we’d rather tell you what you need than sell you what’s cheap.
FAQs – Shower Replacement Cost
How much does it cost to replace a shower in Orlando?
A shower replacement in Orlando costs $3,000 – $8,500 on average in 2026. A basic acrylic or fiberglass unit swap sits at the bottom of that range, a mid-grade tile alcove with a standard door lands around $4,000 – $6,500, and a custom tile shower with frameless glass and a bench pushes to $7,000 and up. Call (850) 920-7745 for a written price on your specific bathroom. Estimates are free and the price is locked before work starts.
How much is a walk-in shower in Orlando?
A walk-in shower installation in Orlando ranges from $4,500 to $12,000. The lower end is a curbless entry with a prefab pan and an acrylic surround; the upper end is a fully tiled walk-in with a custom glass panel, bench seat, and niche shelving. The walk-in category includes showers with or without a low curb, but curbless (barrier-free) showers cost $700 – $1,500 more because the floor must be built up and waterproofed to create proper drainage slope.
How much does a tub-to-shower conversion cost in Orlando?
A tub-to-shower conversion in Orlando runs $3,500 – $10,000. The cost includes demoing the existing tub, capping or relocating the drain line, installing a shower pan or tile base, waterproofing, wall surround, valve, and finish work. Orlando homeowners with 1960s – 1980s ranch homes in neighborhoods like Azalea Park and Dover Shores are the most common conversion calls we get. If you have a single bathroom and need a tub for children, that changes the math, so call us first and we’ll help you think it through. Reach us at (850) 920-7745.
Can you replace just a shower pan in Orlando?
Yes, replacing just the pan typically costs $800 – $2,200 including removal, disposal, and installation of a new pan. The catch: if the pan has been leaking, the wall behind it is often already compromised, and a pan-only fix can mask bigger problems that show up later. In our experience with Orlando homes, pan-only replacement makes sense when the pan is cracked from impact (dropped shampoo bottle, for example) but the waterproofing is intact. If there’s water on the ceiling below, it’s past pan-only repair. Call for an on-site look and we’ll tell you which situation you have.
Do I need a permit to replace a shower in Orlando?
In the City of Orlando and unincorporated Orange County, shower replacement typically requires a permit when it involves replacing the shower valve, altering plumbing, or making changes behind the wall beyond cosmetic surface work. A straight replacement of the tile or surround without plumbing changes may not trigger a permit, but once you touch a valve or drain, it usually does. We handle permitting as part of the project. If you’re doing it yourself, consult Orange County’s Building Safety Division before you open the wall. The penalties for unpermitted plumbing work in Orlando can complicate a future home sale, and home inspectors in this market are trained to look for it.
If you have a question that’s not covered here, call (850) 920-7745. A live person answers every call, any hour, any day, including weekends and holidays. No call trees, no voicemail loops. Ask away.
Get a Written Price Before Work Starts
If you’re in Orlando or anywhere in Orange County and thinking about replacing a shower, we’d like to help you price it properly. We’ll come out, see the space, discuss what you’re trying to accomplish, and then put a written price in your hands before any tool leaves the truck. That price covers everything: materials, labor, permits, disposal. No surprise invoices and no verbal estimate that grows on the final bill. When the work is done, you have the 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost. And if anything fails down the road, you get a free return visit, no dispute process, no conditions. That’s the way Mason Remodeling Co Orlando has done business since 2004, and we don’t plan to change it. Call (850) 920-7745 to schedule your free estimate. We’ll send you the name and photo of who’s coming before they arrive.
Written by Isaac Pruett, Owner at Mason Remodeling Co Orlando, serving Orlando since 2004. Pricing reflects the Orlando market as of 2026. Mason Remodeling Co Orlando offers free estimates – call (850) 920-7745.
What Our Customers Say
"Great quality tile work. The countertop template slipped by a week, but the project lead explained and kept us updated."
- Susan Y."Very respectful in the house. Shoe covers every day and a cleanup every evening."
- Alma V."Kitchen remodel with new cabinets, quartz counters, and a tile backsplash. Crew had ID and were background checked. Kept the work area clean and sealed off dust from the rest of the house."
- Janice D.
