Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Orlando?
Custom window and door orders in Orlando typically run between $12,000 and $38,000 for a full-home project, with most homeowners spending around $18,000 to $26,000 for mid-range materials and professional installation. Single custom doors usually fall in the $2,500 to $7,000 range, while individual custom windows run $900 to $2,800 each depending on size, material, and glass package. These figures reflect the Orlando market in 2026, where hurricane-code compliance and humidity-resistant materials add roughly 15 to 20 percent compared to inland Florida pricing.
At home, we believe you should know the real numbers before you pick up the phone. If you’re considering a Custom Window & Door Order in Orlando, this guide breaks down exactly where your money goes, what drives costs up or down, and how to avoid overpaying.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what Orlando homeowners can expect to pay in 2026, based on project scope and material grade. These are real market ranges, not national averages adjusted for effect.
| Project Component | Low End | High End | Notes |
|---|---|---|---|
| Custom single entry door (fiberglass) | $2,500 | $4,800 | Includes frame, hardware, installation |
| Custom single entry door (solid wood) | $4,200 | $9,000 | Mahogany or oak; higher in Winter Park and Dr. Phillips |
| Custom sliding glass door (8 ft) | $3,800 | $7,200 | Impact-rated glass pushes toward the top of range |
| Custom French doors (pair) | $4,500 | $9,500 | Interior or exterior; exterior requires weatherproofing |
| Custom window (standard size) | $900 | $1,800 | Vinyl frame, single-hung or casement |
| Custom window (oversized or architectural) | $1,800 | $4,500 | Picture windows, radius tops, floor-to-ceiling |
| Full-home custom window package (8 to 12 units) | $12,000 | $24,000 | Depends on frame material and glass package |
| Full-home custom window and door package (combined) | $12,000 | $38,000 | Most common Orlando scope: 10 to 15 openings |
| Impact-rated glass upgrade (per opening) | $500 | $1,400 | Required for wind-borne debris zones in Orange County |
| Interior custom door (single, pre-hung) | $450 | $1,100 | Solid core, shaker or panel profile |
| Custom barn door (single panel) | $700 | $1,600 | Hardware included; slab-only on the low end |
Three things move the needle more than anything else in Orlando: impact-glass requirements, frame material, and the condition of your existing openings. Homes built before 2002 often have non-standard rough openings, so custom sizing becomes mandatory rather than optional, adding $200 to $600 per opening for reframing. Homes in College Park, Thornton Park, and Delaney Park with historic designations may also require specific window profiles, which narrows your material choices and pushes pricing toward the high end of each range.
We deliver a written price before any work starts. No verbal ballparks that grow on the final invoice. The number you approve is the number you pay.
What Affects Custom Window & Door Order Pricing in Orlando
- Impact-rating and building code. Orange County sits in a wind-borne debris region, so any opening larger than a standard bedroom window requires impact-rated glass or shutters. Impact windows run 40 to 60 percent more than non-impact equivalents. It’s not optional, and it’s the single biggest cost driver in the Orlando market.
- Frame material. Vinyl is the budget-friendly standard at $900 to $1,800 per window. Aluminum holds up better against Orlando’s summer humidity but runs $200 to $500 more per unit. Wood and wood-clad frames are beautiful but demand constant sealing against moisture, and they add $800 to $2,000 per opening.
- Humidity and moisture resistance. Orlando’s wet season runs from June through September, and that constant moisture punishes cheap seals and unsealed wood. We specify stainless hardware and composite sills on exterior doors as standard in this market. Budget $150 to $400 per door for those upgrades rather than discovering rust in year three.
- Glass package and energy performance. Low-E coatings and argon fills are standard on any quality window, but triple-pane and tinted glass packages for west-facing exposure add $120 to $400 per unit. Homes in Lake Nona and Horizon West with large glass acreage see the biggest variance here.
- Opening condition and structural work. Rotted sills, termite damage, and out-of-square rough openings are common in Orlando homes built in the 1970s through the 1990s. Reframing a damaged opening runs $300 to $900, and you won’t know it’s needed until the old window or door comes out. That’s exactly why our written price includes a pre-work inspection.
- Labor and access. Single-story ranch homes in Conway and Azalea Park are straightforward. Second-story installations or tight side-yard access in neighborhoods like Baldwin Park and SoDo add $150 to $500 per opening for scaffolding and extra time.
How to Save on Custom Window & Door Order
Saving money on custom windows and doors in Orlando doesn’t mean cutting corners on materials. It means sequencing the work well, choosing the right upgrades, and knowing exactly what you’re paying for before the crew arrives.
- Replace in phases, but plan as one project. Buying a full-home package at once typically reduces per-unit cost by 10 to 15 percent versus ordering room by room. If your budget won’t cover everything at once, we’ll plan the full scope and stage installation so you get volume pricing without a big single outlay.
- Choose impact-rated glass where code requires it, not everywhere. Some homeowners over-buy impact glass on interior-facing windows where standard insulated glass meets code. We’ll tell you exactly where impact rating is mandatory and where you can save.
- Keep the original opening size. Custom-sizing a window to fill an existing rough opening is dramatically cheaper than resizing that opening. If you can live with the current dimensions, you avoid reframing, drywall work, and trim replacement.
- Don’t skip the pre-work inspection. An inspection that catches a rotted sill before you commit to a price means no surprises on demo day. Our written price is based on what we actually found, not an optimistic guess.
- Ask about mid-range materials that perform like premium ones. Fiberglass doors with a wood-grain finish give you the look of solid wood without the maintenance or the $2,000 premium. Composite trim holds paint longer than wood in Orlando’s humidity. Small material choices compound into real savings.
Estimates are free, and there’s no obligation. Call (850) 920-7745 and a live person will answer, any hour, any day. No phone trees, no callbacks that never come.
What You Get With Mason Remodeling Co Orlando
Isaac Pruett leads our Orlando team, and the standard we work to was built into this company from the start in 2004. You’ll know exactly who is coming to your home before they knock, because every technician’s name and photo is sent to you before the visit, and every crew member arrives in a clean uniform with a photo ID badge at the door. That’s the Threshold Standard, and it’s not optional.
Every custom window and door order from Mason Remodeling Co Orlando comes with a written price before any work begins. You’ll also get a written guarantee on every project, with coverage terms stated plainly: what’s included, what’s excluded, and for how long. The 365-Day Done Right Promise means if the work isn’t right within a year of completion, we make it right at no cost to you. If an installation fails, you get a free return visit, no charge, no dispute process, no conditions.
We work with specification-grade materials from manufacturers like PGT, Andersen, and Marvin for windows, and Therma-Tru and Simpson for doors. That matters in a market like Orlando, where a bargain-priced window that fogs after two summers is not a bargain.
How Much Does Custom Window & Door Order Cost in Orlando? FAQ
Is it cheaper to repair or replace a custom window or door in Orlando?
Repairs run $180 to $550 per window for common issues like failed seals, broken hardware, or misaligned tracks, while replacement runs $900 to $2,800 per unit. If the frame is sound and the glass is intact, repair usually wins. If you’re seeing condensation between panes or visible rot, replacement is the better long-term decision. Call (850) 920-7745 for a free assessment.
How much does an impact-rated custom door cost in Orlando?
An impact-rated custom fiberglass entry door runs $3,200 to $6,500 installed, while a solid wood impact door runs $5,800 to $11,000. The glass lamination and reinforced frame account for the premium, and Orange County building code requires them in wind-borne debris zones. We’ll tell you exactly what your specific location requires.
How long does a custom window and door order take in Orlando?
Custom orders typically take 4 to 8 weeks from order to installation, depending on the manufacturer and whether the units require impact certification. PGT and Andersen runs have predictable lead times, but post-hurricane demand in peak season can extend them. We order early and schedule installation as soon as materials arrive.
Do custom windows and doors in Orlando require a permit?
Yes, most window and door replacements in Orlando require a building permit through the Orange County Division of Building Safety. The permit typically runs $150 to $500 depending on the scope, and it covers inspections to confirm the installation meets Florida Building Code, including wind-load requirements. Our team handles the permit paperwork as part of your written price.
What is the most common custom door size in Orlando homes?
The most common custom entry door size in Orlando is 36 inches by 80 inches, with an upgraded 36 by 96 size growing more popular in newer construction and taller ceiling plans in neighborhoods like Winter Garden and Clermont. Standard 30-inch and 32-inch widths are common for secondary entries and older homes.
Can you install custom windows and doors the same day in Orlando?
Installation of custom units is scheduled after the order arrives, and full-home installations usually take 2 to 4 days for a crew of two or three. Because every unit is built to your exact specifications, same-day installation from a standing inventory isn’t possible, but we’ll give you a firm installation date the moment the manufacturer confirms the shipment. Call (850) 920-7745 to get your order started, and we’ll lock in a schedule that works for your household.
Get Your Custom Window & Door Order Price in Writing
You don’t have to guess what custom windows and doors will cost in Orlando, and you shouldn’t have to risk a verbal estimate that grows when the bill arrives. Call (850) 920-7745 and tell us what you’re planning. We’ll schedule a no-obligation assessment, walk through your options in plain language, and hand you a written price before any work begins. That’s how Mason Remodeling Co Orlando has operated since 2004, and it’s not changing.
Pricing reflects the Orlando market as of 2026. Mason Remodeling Co Orlando offers free estimates – call (850) 920-7745.
Written by Isaac Pruett, Owner at Mason Remodeling Co Orlando, serving Orlando since 2004.
What Our Customers Say
"Basement refinish with egress window. Drywall finish is smooth and the electrician was tidy."
- Kyle S."Opened up the wall between kitchen and dining room. They handled the beam and permit and the floor transitions look seamless."
- Wendy A."Written scope, fixed price, and weekly updates. No change orders we hadn't agreed to."
- Carlos H.
