KraftMaid Construction Service Nationwide

Why Orlando Homeowners Choose KraftMaid Construction

We provide Kraftmaid in Orlando as an independent construction service – cabinet installation, refacing, repair, and kitchen island work – using OEM-spec parts and a written price before any tool is unpacked. Our crews work on KraftMaid cabinetry weekly across Orlando neighborhoods, which means we know how Vantage, Benton, Durham, and Hadley lines hold up in Central Florida humidity. We are not affiliated with or authorized by KraftMaid. We are an independent service provider, and that independence shapes every recommendation we make: repair what is structurally sound, replace only what is truly failing, and never push a full cabinet replacement when refacing or a targeted fix extends the life of what you already own. If your KraftMaid cabinets are peeling, pulling, or sagging, call (850) 920-7745 and tell us what you are seeing.

Call (850) 920-7745

Why Trust Mason Remodeling Co Orlando for Your KraftMaid Construction?

Isaac Pruett, a General Contractor and owner of Mason Remodeling Co Orlando, learned the trade at Los Angeles Trade-Technical College and has spent the decades since applying that training to real kitchens and baths for real families. In Orlando, that education meets a specific set of conditions: heat that pushes cabinet finishes past their limits, humidity that makes thermofoil lift, and hard water that gets into hinges and rails. We have worked on KraftMaid cabinetry in College Park bungalows, planned communities west of downtown, and across the metro area, so we know which KraftMaid lines fail in predictable ways and which hold up. Every crew member who arrives at your door is background-checked and identity-verified under the Threshold Standard. You get the technician’s name and photo before the visit, and they arrive in a clean marked uniform with a photo ID badge. Your written price comes before any work starts, and your written guarantee states plainly what is covered and for how long: 365 days from the completion date. If something is not right inside that year, we fix it at our cost.

Common KraftMaid Construction Problems We Fix in Orlando

• Thermofoil peeling and bubbling on Vantage and Benton door fronts. This is the most common KraftMaid failure we see in Orlando. Thermofoil is a vinyl layer heat-bonded to an MDF core. Central Florida humidity, combined with heat from ovens and dishwashers, gradually weakens that bond. Edges lift first, usually on lower cabinets near heat sources. The repairs we do involve stripping the failing film, sanding the core, and applying a factory matched finish with new edge sealing. It does not look like a patched door when done correctly. It looks like a door that was never failing.
• Soft-close hinge and drawer glide failures on frameless KraftMaid cabinets. KraftMaid’s frameless lines use Euro-style hinges and under-mount glides. When these fail, doors slam or drawers drift open. The cause is usually cumulative: humidity swelling the cabinet material changes the gap geometry slightly, and the hinge or glide is forced to work against that resistance until the internal damper wears out. We replace with OEM KraftMaid hinges and glides when the model is still available. When a line has been discontinued, we use quality Euro-spec aftermarket parts that match the original hole patterns.
• Wall cabinet mounting rails pulling away from drywall. This is an installation problem, not a cabinet manufacturing defect. When the original installer missed studs or used undersized screws, the rail can let go over time, especially in Orlando homes where moisture causes drywall around the anchors to soften. We remove the cabinet, locate the studs, add blocking where needed, and remount with fasteners rated for the cabinet weight. The repair is structural, not cosmetic.
• Finish wear and edge chipping on maple and oak door styles. Durham and Hadley lines in maple and oak show this after years of kitchen cleaners and humidity cycles. The finish wears thin at grip points, and edges chip from contact. KraftMaid sells factory matched touch-up kits for these finishes, and we stock kits for the most common Orlando cabinet finishes. Touch-up is not a permanent cure for heavily worn doors, but for isolated chips and scratches, it is the right repair at the right price.
• Moisture damage inside sink base cabinets. This is less about the cabinet and more about the environment. Orlando’s humidity means a small sink leak never fully dries. We add moisture barriers inside sink base cabinets during any repair, and we check the plumbing connection while we are in there. It is a small step that prevents the box from rotting out from the inside.

KraftMaid Parts & Our Repair-vs-Replace Approach

We use KraftMaid OEM hinges, glides, and touch-up kits whenever the line is still in production because the hole patterns and overlay tolerances match factory specs exactly. That matters when you are replacing one hinge on a door that has to close flush against its neighbor. When a cabinet line has been discontinued, we substitute quality aftermarket soft-close adapters or Euro-style hinges that fit the existing bore pattern without drilling new holes. Our guide for repair versus replace is simple: we reface or fully replace only when the cabinet box itself is water-damaged, termite-damaged, or the door style is permanently discolored beyond a factory touch-up. Otherwise we repair and adjust. A well-built KraftMaid box has decades of life left in it. Throwing that away because a hinge wore out is bad money. If you are not sure which direction makes sense for your kitchen, call (850) 920-7745 and we will give you a straight answer with numbers attached.

Our KraftMaid Service Process – Step by Step

1. 1
   Diagnosis. We inspect your KraftMaid cabinets in place. That means checking hinge geometry, drawer glide resistance, rail mounts, door alignment, and finish condition. We look for moisture intrusion at the sink base and any sign of termite pressure near the toe kicks. You get a written diagnosis and a written price.
2. 2
   Repair or install. For repairs, we use OEM KraftMaid parts where available and quality substitutes where the line is discontinued. For new cabinet installation, we level and shim every box, secure rails to studs with rated fasteners, and adjust every door and drawer face before we call the job done.
3. 3
   Test. Every door opens and closes flush. Every drawer glides with consistent resistance. Soft-close mechanisms engage without slam. We run the cabinets through a full cycle of use, not just a visual check.
4. 4
   Warranty. Your written guarantee covers the work for 365 days from the completion date. If something we touched fails, we come back at no charge. No dispute process. No conditions. We just fix it.

KraftMaid Products We Service & Install in Orlando

We service and install KraftMaid’s current and recent lines, including Vantage, Benton, Durham, and Hadley. That covers both framed and frameless construction, thermofoil and wood door styles, and standard and soft-close hardware. We stock factory matched touch-up kits for the most common Orlando kitchen finishes and keep OEM hinges and glides in the truck for same-day hardware repairs on most KraftMaid lines. When we are installing new KraftMaid cabinets, we also handle the cabinet-adjacent work that needs to happen at the same time: countertop coordination, backsplash, and kitchen island construction.

We Also Service These Brands

While KraftMaid is a line we work on weekly, our Orlando crews also handle Cambria and Silestone countertops, and Kohler and Toto fixtures. That matters because a kitchen project rarely stops at the cabinet boxes. When you are refacing KraftMaid cabinets, you may also want a new countertop or a better faucet. We can do all of it under one written price.

FAQs – KraftMaid Construction Service in Orlando