Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Orlando Homeowners Choose Mr-Glass Construction
We’re Mason Remodeling Co Orlando, and we provide independent Mr Glass in Orlando construction service for frameless shower enclosures, tub-to-shower conversions, and walk-in shower installations. Our crews work on Mr-Glass Enigma, Serenity, and Alure units every week, so we know the hardware, glass tolerances, and install quirks these enclosures develop in Florida’s humidity without relying on manufacturer authorization. We are not affiliated with or authorized by Mr-Glass, and we’ll tell you that straight. Call (850) 920-7745 for a free estimate on any Mr-Glass repair or replacement in Orlando.
What separates our Mr-Glass work from a General Contractor or handyman’s attempt is simple: we know which rollers, pivots, and sweeps these specific enclosures use, what fails first in Orlando’s hard water, and when a repair makes more sense than a replacement. That knowledge saves you money. Isaac Pruett, our owner, learned the trade at Los Angeles Trade-Technical College and has spent decades fixing real problems for real families. He still measures twice before he cuts once, and he’ll tell you that’s less a habit than a personality flaw he’s learned to live with.
Why Trust Mason Remodeling Co Orlando for Your Mr-Glass Construction?
Mr-Glass frameless enclosures are precise pieces of engineering. The Enigma hinged door uses a specific pivot assembly that carries the full weight of a 10mm tempered glass panel. The Serenity bypass system rides on rollers that have to handle daily sliding while resisting corrosion from whatever’s in your water. The Alure neo-angle unit depends on thin vinyl sweeps and magnetic strips to keep water inside the curb. When any of these components fails, the fix has to match the original geometry, or you’ll be back where you started in six months.
That’s where our experience matters. Every crew member who touches a Mr-Glass Construction in Orlovista, FL or Orlando area enclosure has worked on these specific units before. We carry the rollers, sweeps, and pivot hardware that match Mr-Glass’s current production, so most repairs happen same-visit without waiting on special-order parts. When a part is out of production or the enclosure has a custom configuration, we use high-grade aftermarket components that match the original dimensions and finish. We don’t install cheap universal kits and call it done. Isaac Pruett built this company on showing up when he says he will, keeping the job site clean, and giving homeowners a straight answer even when the answer is complicated. That’s how we handle every Mr-Glass job in Orlando.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Orlando
- Serenity bypass rollers seize from mineral buildup. The bottom rollers on Mr-Glass Serenity sliding doors are metal assemblies that sit in a track exposed to whatever your water leaves behind. Orlando’s water is hard, and over two or three years, calcium and lime deposits bind the roller bearings until the door won’t slide at all. Homeowners often assume they need a new enclosure. Most of the time, we replace the roller assemblies with matching stainless-steel hardware and the door glides again.
- Enigma hinged doors sag at the pivot and leak at the strike jamb. The Enigma series uses a single pivot point to carry a heavy glass door, and after years of daily use, that pivot develops play. The door drops slightly, leaving a 3/8″ to 1/2″ gap at the strike jamb where water escapes onto the bathroom floor. It’s not warped glass. It’s a pivot hardware issue we correct by shimming and tightening or replacing the pivot assembly.
- Alure sweeps and magnetic strips crack from Florida humidity. The seal at the bottom of a Mr-Glass Alure neo-angle enclosure is a vinyl sweep held in place by a channel. Orlando’s heat and humidity dry out vinyl faster than most climates. The sweep cracks, the magnetic strip loses its grip, and water finds the gap at the curb. We stock replacements that match the Alure profile, and the fix usually takes under an hour.
- ClearCoat glass protection degrades under direct sun. Mr-Glass applies a protective coating to some glass lines, including Crystal Clear 10mm. In Orlando homes with east-facing or west-facing windows, constant direct UV exposure breaks down that coating over time. The glass starts to etch, and water spots form that won’t wipe off. We can strip and reapply a compatible coating, or in severe cases discuss replacement glass.
- Top tracks bow on Serenity enclosures. The top track on a bypass unit carries lateral force every time someone slides the door. In Orlando’s humidity, aluminum tracks expand and contract with temperature swings. Over years, that track can bow slightly, making the doors bind or jump the rail. We re-angle or replace the track and reset the glass alignment so both panels move cleanly.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We stock the Mr-Glass-specific rollers, sweeps, pivot assemblies, and strike jamb hardware that match the brand’s current production lineup. That means when your Serenity door stops sliding or your Enigma hinge starts sagging, we often complete the repair in one visit. For older Mr-Glass units where the original parts are no longer manufactured, we source aftermarket components that match the original dimensions, finish, and load rating. We will not substitute a universal kit that looks close enough but fails in six months.
Our honest repair-vs-replace rule is this: if the glass is intact, the frame is structurally sound, and the failure is in hardware or seals, we repair. If the glass is etched beyond restoration, the frame is corroded, or the enclosure was custom-sized and we can’t confidently match the components, we’ll tell you replacement is the smarter long-term spend. We never push a replacement just because it’s a bigger invoice. Call (850) 920-7745 and tell me what the problem is. We’ll figure out the rest from there.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the enclosure, identify the exact Mr-Glass series, and measure the glass thickness, track dimensions, and hardware condition. For Serenity units, we check roller wear, track bow, and glass alignment. For Enigma doors, we check pivot play and strike jamb gap.
- 2
Repair or install. We use OEM-compatible parts or matched aftermarket components. For new installations like a Mr-Glass Enigma framed shower door or Crystal Clear 10mm walk-in enclosure, we install to the manufacturer’s tolerances and check for plumb, level, and water-tight sealing.
- 3
Test. We run the door through its full range of motion, spray the seams and seals with water to check for leaks, and verify the hardware handles daily use without binding. We don’t leave until the enclosure works the way it should.
- 4
Warranty. Every Mr-Glass repair and installation in Orlando is covered by our written guarantee with clearly stated terms, including what’s covered, what’s excluded, and for how long: 365 days from the completion date. If something fails within that year, we return and make it right at no cost.
Mr-Glass Products We Service & Install in Orlando
Our Orlando crews work across the full Mr-Glass lineup we see in Central Florida homes:
- Mr-Glass Enigma series – frameless hinged shower doors with pivot hardware and strike jamb seals.
- Mr-Glass Serenity series – sliding bypass shower enclosures with top and bottom tracks and roller assemblies.
- Mr-Glass Alure series – neo-angle shower enclosures with vinyl sweeps and magnetic closure strips.
- Mr-Glass Crystal Clear 10mm – the premium thick-glass line used in frameless walk-in showers.
We stock common rollers, sweeps, pivot assemblies, and seals for these lines locally in Orlando, so most repairs don’t wait on a parts order. For full enclosure replacements, we quote the glass, hardware, and installation as one written price before any work starts.
See the difference
Before
After
Before
After
Before
AfterWhat Mr-Glass Construction Costs in Orlando
| Service | Price Range in Orlando |
|---|---|
| Mr-Glass roller and sweep replacement (Serenity or Alure) | $400 – $1800 |
| Frameless glass shower enclosure replacement (Mr-Glass Enigma with new hardware) | $3000 – $8500 |
| Tub-to-shower conversion using Mr-Glass Serenity sliding enclosure | $3500 – $10000 |
| Walk-in shower installation with Mr-Glass Crystal Clear 10mm glass | $4500 – $12000 |
These are real Orlando market ranges based on the Mr-Glass units we install and repair here. Your exact price depends on enclosure size, glass thickness, hardware condition, and whether we’re working with existing glass or ordering new. We deliver a written price before any work starts, on every project, every time. No verbal estimates that grow on the final bill.
We Also Service These Brands
Mr-Glass enclosures sit inside bathrooms that also involve cabinetry, countertops, and fixtures. We work across KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, and Kohler, Moen, Toto, and Grohe fixtures. That multi-brand capability matters when a shower enclosure replacement reveals a vanity that needs moving or a countertop that needs recutting. One crew handles the whole job in Orlando.
FAQs – Mr-Glass Construction Service in Orlando
You can replace just the rollers in most cases. The Serenity bypass system uses roller assemblies that are designed to be swapped independently of the glass panels. We did exactly this for an Orlando homeowner whose bottom rollers had seized from years of hard-water crust. We replaced the roller assemblies with matching stainless-steel hardware, re-angled the bowed top track, and realigned both glass panels, similar to a Mr Glass repair in Clermont we completed last month. The homeowner kept the existing glass and saved the cost of a full enclosure replacement. Call (850) 920-7745 for an exact quote.
No, the glass isn’t warped. The Enigma series uses a pivot assembly that carries the full weight of the door, and that pivot develops play over years of use. The door drops slightly, creating a gap at the strike jamb. We correct it by adjusting the pivot, adding shims, or replacing the pivot hardware if it’s worn beyond adjustment. The glass itself almost never needs replacement for this problem.
Sometimes, but it depends on the panel dimensions and the new curb layout. A tub-to-shower conversion changes the geometry of the space, and existing Mr-Glass glass often doesn’t transfer cleanly to the new opening. We’ll tell you honestly if the existing panels can be reused or if new Serenity or Crystal Clear glass is the better route. Call (850) 920-7745 for a free assessment.
The spots likely mean the ClearCoat glass protection has degraded. Mr-Glass applies a coating to some glass lines, including Crystal Clear 10mm, and in Orlando homes with direct east or west sun exposure, UV breaks down that coating over several years. Once the coating is gone, minerals in Orlando’s hard water etch into the glass itself, and no amount of scrubbing removes those spots. We can strip and reapply a compatible coating, or replace the glass if the etching is too deep.
We install both. New construction and full bath remodels in Orlando make up a significant portion of our Mr-Glass work. For new builds, we measure the opening, order the appropriate Enigma or Serenity enclosure, and install to manufacturer tolerances with proper waterproofing at the curb and jambs. For replacements, we assess whether the existing glass can be retained or whether new panels make more sense.
Using an independent service provider does not automatically void a manufacturer warranty under U.S. law, but some warranty claims require proof that the work was performed to the manufacturer’s specifications. We use OEM-compatible parts, follow the same installation tolerances, and document our work. Keep our written warranty and keep the manufacturer’s terms. If a claim ever comes up, you’ll have the paperwork to support it.
Book Your Mr-Glass Service in Orlando, FL
Tell us what’s happening with your Mr-Glass enclosure. We’ll tell you what it costs to fix, in writing, before any work starts. Call (850) 920-7745 for a free estimate on Mr-Glass repair or replacement in Orlando.
Written by Isaac Pruett, Owner at Mason Remodeling Co Orlando, serving Orlando since 2004.
