Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Orlovista, FL | Mason Remodeling Co Orlando
We provide independent KraftMaid cabinet installation, refacing, and General Contractor - Orlovista kitchen remodeling across Orlovista, and we’re not a manufacturer affiliate. What makes our KraftMaid work different here is that we plan every project around the realities of Orlovista’s 1950s concrete-block homes: out-of-square CMU walls, overhead 60-amp panels, and cast-iron waste lines hiding under the slab. You get a written price before any work starts, and you’ll know exactly who’s walking through your door. Call (850) 920-7745 for a free estimate.
Why Orlovista Residents Choose Us for KraftMaid Service
Isaac Pruett, our owner, learned cabinetry and construction at Los Angeles Trade-Technical College, and he’s spent the years since applying that training to real houses, real kitchens, real problems. His crews have been working in Orlando-area homes long enough to know that a KraftMaid Vantage door in a 1962 Orlovista duplex will fail differently than the same door in a 2015 Ocoee house. We stock genuine KraftMaid hinges, drawer glides, and touch-up kits for the residential lines you actually have, and we’re familiar with how the Durham, Hadley, Lexington, and Vantage lines hold up under Florida humidity. Every crew member is background-checked, arrives in a marked uniform, and shows a photo ID badge at your door. We send the technician’s name and photo before the visit, so there’s no stranger at the threshold. That’s the Threshold Standard, and it’s how we’ve operated since Mason Remodeling was founded in 2004 as part of the Threshold Group family.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Orlovista
- Thermofoil door delamination from sustained humidity. Many Orlovista kitchens are unconditioned or poorly ventilated, and the humid subtropical climate means a KraftMaid thermofoil door can start peeling at the edges within a few years. We strip, resurface, or replace only the affected doors, matching veneers where possible, so you’re not buying an entire cabinet run.
- Frameless cabinet hinge plate pull-out from brittle CMU or hollow drywall patches. The original 1950s block walls in Orlovista don’t always have wood blocking where you need it. Screws into crumbling gypsum or brittle block eventually fail, and the hinge pulls loose. We open the wall, install solid blocking, and remount the hinge with hardware sized for the cabinet’s actual weight.
- Drawer glide sag or jamming after years of rental turnover. Orlovista has a high share of rental properties, and tenants don’t always treat overloaded drawers kindly. Missing adjustment clips, bent glides, stripped mounting screws. We replace glides with genuine KraftMaid parts when available, or verified aftermarket glides size-matched to the drawer box.
- Water staining and substrate swelling on sink base cabinets. Cast-iron supply lines rot behind the original CMU walls, leak slowly for months, and the first visible casualty is often the sink base. We pull the cabinet, assess the box, and often save the structure with sealing and a new toe-kick or face frame rather than replacing the whole unit.
- Torqued door alignment from out-of-square openings. Older Orlovista kitchens settle. Walls shift. Doors that were aligned in 1985 are no longer aligned. We re-square within the limits of the wall, adjust hinges properly, and tell you honestly where the wall needs reframing instead of pretending cabinet adjustment will fix everything.
KraftMaid Service in Orlovista: What Local Conditions Mean for Your Equipment
Orlovista is one of the few pockets of Orange County where original 60-amp electrical panels and cast-iron waste lines still coexist in the same 1950s CMU shells. When we plan a KraftMaid kitchen remodel here, we’re almost always working around one or both. The panel upgrade moves the electrical service, which changes cabinet layout. The under-slab waste line repair means cutting concrete, which changes the sink base position. Homes in Pine Hills or Ocoee of the same era don’t face this combination as often, because they’ve typically had at least one major infrastructure upgrade since construction. In Orlovista, the systems are frequently still original. That means your KraftMaid cabinet order can’t be finalized without checking where the panel will land and where the slab cut will happen. We’ve done enough of these kitchens to know the sequence, and we’d rather tell you about the complication before the cabinets arrive than pretend it won’t surface mid-project. Our Orlovista service area coverage includes all of the unincorporated neighborhoods around the lake, and we plan every project around these local conditions from day one.
KraftMaid Models & Products We Service in Orlovista
We work on the KraftMaid lines most common in Orlando-area homes: Vantage, Durham, Hadley, and Lexington. Vantage and Durham are the ones we see most in Orlovista’s rental stock, because they were spec’d heavily in the 1990s and early 2000s remodels. Hadley and Lexington show up more in owner-occupied homes. For fit-critical hardware, we use genuine KraftMaid hinges and drawer glides, but when a door style has been discontinued, we source verified aftermarket thermofoil and matching wood veneers instead of forcing a full-cabinet replacement. The cabinet box matters more than the door. If the box is structurally sound, we quote repair before replacement, which matters in Orlovista’s 1950s-built homes where cabinet sizes are often custom and off-the-shelf replacements don’t fit. For broader KraftMaid work across the region, see our KraftMaid sales & service page.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Orlovista
| Service | Price Range |
|---|---|
| Full Kitchen Remodel with KraftMaid | $14,000 – $45,000 |
| Small Kitchen Remodel with KraftMaid | $9,000 – $20,000 |
| KraftMaid Cabinet Installation | $4,000 – $13,000 |
| KraftMaid Cabinet Refacing | $4,000 – $12,000 |
| KraftMaid Kitchen Island Installation | $3,000 – $10,000 |
What drives the cost in Orlovista specifically: whether we’re dealing with CMU walls that need blocking, a panel relocation that affects cabinet layout, or slab work that changes the sink base position. Your free estimate includes a written line-item price, not a verbal range that grows later. We deliver the written price before any work starts, and we don’t change it once the job begins. Call (850) 920-7745 to schedule yours.
Serving Orlovista, FL - Our Local Coverage Area
We’re based in the Orlovista area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Orlovista
Can you match my existing 1990s KraftMaid door style when only a few doors are damaged in my Orlovista rental?
Yes, we can match most 1990s KraftMaid door styles using either current KraftMaid doors when the line is still in production or verified aftermarket thermofoil and wood veneers that replicate the profile and finish. We’ll show you the match before ordering. Call (850) 920-7745 for a free estimate.
How do you stop KraftMaid thermofoil doors from peeling again in my un-air-conditioned Orlovista kitchen?
We remove the damaged doors, properly prep the substrate, and apply a sealed thermofoil or wood veneer with edge banding that resists humidity better than the original application. We’ll also recommend ventilation improvements if the kitchen traps moisture. The fix holds, but the root cause is the humidity. Call (850) 920-7745 and we’ll assess both.
My Orlovista house has 1950s CMU walls – can you still install full-overlay KraftMaid cabinets without them looking crooked?
Yes. We install blocking where the CMU won’t anchor the hinges properly, then shim and align each cabinet to the wall’s actual plane. Full-overlay doors on out-of-square walls need careful adjustment, and we do that adjustment on site, not on paper. Call (850) 920-7745 for an exact quote.
Do you repair KraftMaid drawer glides or just replace the whole drawer box?
We repair the glide when it’s repairable. That means replacing the glide hardware, adjusting or replacing the clips, and remounting the drawer box to slide cleanly. The drawer box only gets replaced when the box itself is cracked, swollen, or structurally compromised. Call (850) 920-7745 and we’ll tell you which one you need.
Can you handle a KraftMaid kitchen remodel at the same time as a 60-amp panel upgrade and cast-iron waste line replacement?
Yes, and that’s actually how we prefer to sequence an Orlovista Bathroom Remodeling or kitchen project: electrical and plumbing first, then cabinet installation around the new panel location and repaired slab. Trying to do them separately means ripping the kitchen apart twice. We coordinate all three scopes, and you still get one written price before any work starts. Call (850) 920-7745 for a free estimate.
Service Areas Near Orlovista
We serve Orlovista and surrounding communities, including Orlando, Apopka, Maitland, and Lake Mary. For lake-region work, see our KraftMaid service in Clermont page. For projects in the city proper, our KraftMaid service in Orlando page covers that coverage area.
Book Your KraftMaid Service in Orlovista Today
Tell me what the problem is. We’ll figure out the rest from there. Call (850) 920-7745 to schedule your free, written KraftMaid service estimate in Orlovista. A live person answers, day or night.
Written by Isaac Pruett, Owner at Mason Remodeling Co Orlando, serving Orlovista and the greater Orlando area since 2004.
