Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The Orlando Owner’s Guide
KraftMaid roofing parts in Orlando typically run $400 to $1,800 installed depending on the component, with most common repairs completed in a single visit. We stock KraftMaid-compatible flashing, ridge caps, vent boots, and underlayment on our trucks, and we can source OEM-specific components within a few business days when a specialty match is required. Most Orlando homeowners discover they have a failed KraftMaid roofing part the same way: a water stain appears on the ceiling after one of our afternoon thunderstorms, or they spot a shingle in the yard after a windy night in Conway or Baldwin Park.
If you’re staring at a damp ceiling right now, here’s the short version: the part that failed is almost never the shingle itself. It’s the flashing, the boot around a vent pipe, or a seal that gave out at a seam. Those are the parts we replace most often, and they’re the parts KraftMaid’s roofing line was never really about. More on that below.
Which KraftMaid Models This Applies To
KraftMaid is a cabinetry brand first, and their venture into roofing components was limited compared to their kitchen lines. Most homeowners calling us about “KraftMaid roofing” have one of three situations: they inherited a home where a previous contractor used KraftMaid-branded flashing or accessories, they have KraftMaid cabinets and assumed the builder used the same brand throughout the home, or they have paperwork listing KraftMaid as a supplier on a full exterior package from a production builder in the Orlando metro area.
Here’s what matters for identifying your part: check the inside of your attic or the edge of your roofline for any visible manufacturer stamps on metal flashing or ridge vent. KraftMaid roofing accessories, where they exist, were typically white or mill-finish aluminum with a stamped marking near the edge. If you can’t find a stamp, measure the part. Most KraftMaid-compatible flashing came in standard 10-foot lengths, and the ridge caps matched common dimensional shingle profiles. If you’re unsure, take a photo and text it to us at (850) 920-7745 before you climb anything. We’ll tell you what you’re looking at.
On the OEM-versus-aftermarket question: for roofing accessories, a quality aftermarket equivalent from GAF or CertainTeed will nearly always match or exceed the original performance. We carry both, and we’ll be straight with you about which makes sense for your roof. We’re an independent service provider, not affiliated with KraftMaid, which means our job is to fix your roof correctly, not to push a particular label.
Styles & brands we work with
Signs Your KraftMaid Roofing Is Failing
- Water staining on ceilings after rain. This is the most common first sign in Orlando, and it usually points to failed pipe boot flashing around a plumbing vent. The rubber collar degrades in Florida sun and splits, letting water run straight down the pipe and into your attic.
- Granules in your gutters or at downspout bases. If you’re seeing dark granules pile up in your gutters in neighborhoods like College Park or Thornton Park, your shingles are shedding their protective layer. This accelerates fast in Orlando’s UV exposure, and it means the shingle is nearing the end of its useful life even if it still looks okay from the street.
- Lifted or missing ridge caps after storms. Florida wind gets under ridge caps in a way it doesn’t with field shingles. If you see a cap shingle in your yard after a storm, the seal on that cap failed before the wind ever hit it.
- Visible flashing separation at chimneys or walls. The metal flashing that seals where your roof meets a vertical surface should sit tight against both planes. When Orlando’s heat cycles cause expansion and contraction, old flashing pulls away and creates a gap you can sometimes see from the ground with a good set of eyes or binoculars.
- Attic mustiness or damp insulation. Before a leak ever shows on a ceiling, it shows in the attic. If you notice a musty smell when you go up there, or insulation that feels damp near roof penetrations, you’ve got a leak in progress.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, roof repair on a KraftMaid-compatible system runs $400 to $1,800, and the range comes down to what actually failed. A pipe boot replacement is on the lower end, usually $400 to $700. Flashing replacement at a chimney or sidewall runs $600 to $1,200 depending on accessibility and how much of the surrounding shingle field needs to be lifted and re-sealed. Multiple repairs in one visit or significant underlayment replacement pushes toward the top of that range.
If the roof itself has reached the end of its life and repairs no longer make sense, a full roof replacement in Orlando runs $8,000 to $20,000 depending on square footage, pitch, and material choice. We write every quote with parts and labor separated so you can see exactly what you’re paying for. The price on the quote is the price you pay, and every repair carries our 365-Day Done Right Promise: if the fix fails within a year of completion, we return and make it right at no cost, no dispute process, no conditions.
DIY or Call Us?
Here’s the honest split. You can safely do a visual check from the ground: walk around your house, look for missing shingles, visible flashing gaps, or granules building up at gutter downspouts. You can look in your attic for damp insulation or water trails. Those checks cost nothing and they give you real information.
What you should not do is climb onto an Orlando roof, especially in summer when surface temperatures exceed 140 degrees, or attempt to reseal flashing yourself. Roof work on a Florida home involves heights, pitch, and heat that cause serious injuries every year. The caulks and sealants sold at big-box stores are rarely the right product for Florida’s UV and rain cycle, and a failed DIY repair means a bigger leak than you started with. Tell me what the problem is. We’ll figure out the rest from there. Call (850) 920-7745 and we’ll schedule a proper inspection.
FAQs
In Orlando, most roofing parts and materials last 15 to 25 years depending on the component, but our climate shortens that timeline compared to northern states. Intense UV exposure, afternoon thunderstorms, and hurricane-season wind mean flashing and sealants often fail years before the shingles themselves do. If your roof is past the 15-year mark, an annual inspection is the cheapest insurance you’ll buy.
Yes, in most cases a localized repair is both possible and cost-effective. A single failed pipe boot or a lifted section of flashing can usually be replaced without touching the rest of the roof. The exception is when water has been getting in for months and the roof decking under the shingles has started to rot, at which point the repair becomes a replacement job. We’ll know which one you’re dealing with within the first few minutes of an inspection. Call (850) 920-7745 for a free estimate.
Most single-part replacements, like a pipe boot or a section of flashing, take two to four hours on site. Multiple repairs in one visit might stretch to a full day. We schedule the visit in advance, you get the technician’s name and photo before we arrive, and a written quote is in your hands before any work starts.
We stock common KraftMaid-compatible parts on our trucks, including vent boots, flashing stock, ridge caps, and sealants matched to Florida’s climate. For specialty components that need to be matched to a specific profile, we source them through our supplier network with GAF, CertainTeed, and Owens Corning and typically have them within a few business days. You never need to order parts yourself. Call (850) 920-7745 and we’ll handle the entire thing from identification to installation.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
