Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Orlando Owner’s Guide
We stock and install KraftMaid-compatible windows and doors for Orlando homes, and most repairs or replacements run between $450 and $1,500 per opening depending on the part and its condition. We carry common KraftMaid sash locks, tilt latches, hinge kits, weatherstripping, and door sweeps on our trucks, so we can often handle the job in a single visit. The usual discovery moment is a window that won’t stay open or a patio door that starts dragging against the track, and by the time you’re reading this, you’ve probably already tried the obvious fix twice.
Which KraftMaid Models This Applies To
KraftMaid’s window and door lines include vinyl double-hungs, casements, sliders, and a range of patio door configurations, and the hardware varies by series and production year. The fastest way to identify your part is to check the inside edge of the window sash or the door frame for a small white sticker with a serial number and model code. If that sticker is gone, a clear photo of the hardware and a measurement of the sash width will usually narrow it down. One compatibility gotcha in the Orlando market: KraftMaid changed its tilt-latch profile around 2012, so a latch from a newer window will not seat correctly in an older frame. We keep both profiles on hand because this exact mismatch shows up constantly.
Mason Remodeling Co Orlando is an independent service provider and is not affiliated with KraftMaid. That independence is useful here because it means we can tell you honestly when an OEM part is worth the extra cost and when a quality aftermarket equivalent will hold up just as well in Florida humidity.
Styles & brands we work with
Signs Your KraftMaid Windows & Doors Is Failing
- Window won’t stay up: The tilt-latch springs or block-and-tackle balances have worn out. In Orlando, the heat and humidity accelerate spring fatigue, and we see this most often in west-facing windows that take the afternoon sun.
- Draft you can feel around the edges in winter: The original weatherstripping has compressed or deteriorated. KraftMaid’s vinyl bulb seals lose their rebound after a few years of Florida heat cycles, and the air gap shows up fastest in older homes near Conway and Winter Park that still have their original 2005-era windows.
- Sliding door drags or sticks: The roller assembly has picked up grit, or the nylon wheels have cracked. Orlando’s sandy soil works its way into roller tracks fast, and a door that drags today will get harder to open every week until the roller fails completely.
- Sash won’t lock securely: The cam lock has worn down or the keeper is out of alignment. This is a security issue as much as a comfort one, and it’s worth calling right away rather than waiting.
- Window fogs between the panes: The insulated glass seal has failed. This is one case where the part is the glass unit itself, and no amount of cleaning will fix it. It also affects your cooling bill every month in an Orlando summer.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most KraftMaid window hardware repair in Orlando runs $200 to $450 per window, while a full patio door roller replacement is typically $250 to $600. A complete insulated glass replacement for a fogged window is the bigger ticket, usually $600 to $1,500 depending on glass size and Low-E coating. What drives the range is the specific part, whether we’re matching an OEM profile or installing a quality aftermarket equivalent, and how much adjustment the frame needs once the new part is in. Every job includes the part, the labor, cleanup, and a written price before we touch anything. Our workmanship is covered under the 365-Day Done Right Promise, and if the repair fails within a year, we come back and make it right at no charge.
DIY or Call Us?
You can safely check a few things before calling: confirm whether the hardware is actually broken or just loose, clean the track with a dry cloth if you have a slider, and note whether the problem is on one window or every window in the house. What gets homeowners into trouble is forcing a stuck sash or prying off a balance cover without knowing how the tension is loaded. A modern block-and-balance assembly holds enough tension to cause a hand injury if it releases the wrong way. If the window needs anything beyond a track cleaning, call us at (850) 920-7745. Tell me what the problem is. We’ll figure out the rest from there.
FAQs
You can expect 15 to 25 years from KraftMaid windows and doors in Orlando before the frames or glass units start showing real fatigue, but the hardware like tilt latches and rollers typically needs replacement every 7 to 10 years. The heat and humidity compress weatherstripping faster than the frames wear out, so the hardware usually goes first. If your windows are from the mid-2000s, plan on hardware replacement before you plan on full window replacement.
Yes, as long as the frame is square and the glass seal hasn’t failed, we repair the hardware in place with OEM or equivalent parts. A full replacement is usually only the right call when the frame itself has warped or the insulated glass has lost its seal. Call (850) 920-7745 and we’ll give you the honest answer before quoting anything.
Most window hardware repairs in Orlando take 45 to 90 minutes per window once we’re on site. A patio door roller replacement is similar. We bring the common parts on the truck, so there’s rarely a second trip unless the window is an unusual size or an odd production year.
We stock the most common KraftMaid-compatible replacement parts on our trucks, including the pre- and post-2012 tilt-latch profiles, block-and-balance assemblies, rollers, and weatherstripping. For unusual glass units or older door hardware, we source the part directly and bring it with us on the install visit. We also keep parts on hand for Cambria, Silestone, and Kohler products, so if you have multiple things wearing out at once, one call covers it.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
