Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling: The Orlando Owner’s Guide
A full Kohler kitchen remodel in Orlando typically runs $14,000 to $45,000, depending on scope, cabinet work, countertop selection, and fixture count. Most homeowners call us when a single element fails first: a Kohler faucet that won’t stop dripping, a sink flange that’s corroded, or cabinetry that’s pulling away from the wall after years of Florida humidity. The good news is we handle everything from a focused fixture swap to a complete gut renovation, and the written price you get stays the written price.
In Orlando, Kohler fixtures age differently than they do elsewhere. The hard water in Orange County, the constant air-conditioning-driven indoor dryness during summer, and the humidity swings between wet season and dry season combine to put real stress on seals, cartridges, and cabinet joints. We’ve pulled apart Kohler faucets in Baldwin Park homes that were ten years old and found mineral scale you’d expect at twenty. It’s not a defect in the product. It’s Florida. The fix matters less than knowing exactly which Kohler series you have so the replacement part fits the first time.
Which Kohler Models This Applies To
If your kitchen uses Kohler fixtures or fittings, we can match the part. That covers the Simplice, Tournant, Crue, Bellera, Artifacts, and Purist faucet lines, along with Kohler sinks in the Whitehaven, Stages, Ironridge, and Prosser series. We stock cartridges, spray heads, aerators, drain assemblies, and supply lines on the truck for the most common Kohler kitchen fixtures you’ll find across Orlando, from College Park to Lake Nona.
Here’s a compatibility gotcha most homeowners run into: Kohler changed cartridge designs across several faucet lines between 2012 and 2016. A faucet you bought as a “Simplice” in 2013 may use a completely different valve assembly than a Simplice sold in 2018, even though the handle style looks identical. The only reliable way to identify your part is to remove the handle and read the laser-etched number on the cartridge stem or check the tag under the sink. That number, not the model name, is what determines the replacement part number. Mason Remodeling Co Orlando is an independent service provider and not affiliated with Kohler, but we’ve spent enough time with these fixtures to match parts by serial, photo, or measurement when the printed label has worn away.
As for OEM versus aftermarket: Kohler is one of the few brands where we recommend staying with genuine Kohler parts on anything involving water seals or valve internals. The aftermarket cartridges we’ve tested don’t hold tolerances in Orlando’s hard water as well as the original brass and ceramic assemblies. For drain parts, flanges, and mounting hardware, quality aftermarket equivalents perform just fine and cost 20 – 40% less. We’ll give you both options with honest pricing and let you choose.
Styles & brands we work with
Signs Your Kohler Kitchen Remodeling Is Failing
- Faucet drips or streams after shutoff. A worn ceramic disc or degraded rubber seat inside the cartridge lets water slip past when the handle is closed. In Orlando, mineral buildup from hard water accelerates this wear. The fix is a cartridge swap, not a new faucet in most cases.
- Sink leaks around the rim or from below. The putty or silicone seal under the sink flange dries and cracks with years of Florida heat and humidity. You’ll notice water staining inside the base cabinet or a musty smell. Rebedding the sink and replacing the flange gasket stops it.
- Low water pressure from the spout or sprayer. The aerator or spray head diverter is clogged with scale from Orlando’s mineral-heavy water. Simple to clean or replace, but if the diverter valve inside the spout body fails, you’ll need a new spout assembly.
- Spray head won’t retract or the hose kinks. The counterweight under the sink has slipped, or the hose has a hard twist from years of being pulled at an angle. A new hose and weight reset takes under an hour.
- Cabinet doors or drawers sag, stick, or won’t close flush. Humidity cycling in Orlando causes wood and MDF box construction to expand and contract. Hinges loosen, drawer glides wear, and faces drift out of alignment. This is often repairable without replacing cabinetry, unless the boxes themselves have water damage.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Orlando homeowners pay when they call us for Kohler kitchen work:
| Scope of Work | Typical Installed Price (Orlando) |
|---|---|
| Faucet cartridge or spray head replacement | $150 – $400 |
| Faucet replacement (parts and labor) | $450 – $1,200 |
| Sink replacement or rebedding | $600 – $2,500 |
| Cabinet installation (full kitchen) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Full kitchen remodel | $14,000 – $45,000 |
Every one of those numbers includes parts, labor, cleanup, and our written guarantee. What drives the range on a full remodel is cabinet grade, countertop material (Cambria and Silestone quartz run higher than entry-level granite), and whether you’re moving plumbing or electrical. We also work with KraftMaid cabinetry when structural replacement is needed. You get a written price before any work begins, and that price doesn’t change unless you change the scope. The guarantee covers our workmanship for 365 days from the completion date. If something fails that we touched, we return and fix it at no charge.
DIY or Call Us?
Some things you can safely handle. Clearing a clogged aerator, tightening a loose handle screw, or wiping down gaskets with vinegar to remove scale are all reasonable Saturday-morning projects. If you can see the problem, identify it, and reach it without pulling the fixture apart, go ahead.
Where homeowners in Orlando get into trouble is pulling a faucet apart without the right cartridge tool or trying to force an old cartridge out of a hard-water-seized valve body. A cracked valve body means a new faucet, not a new cartridge. If the water shutoff valves under the sink are original to a pre-2000 home in Thornton Park or Delaney Park, they may not even close fully anymore. We see it weekly. If you’re not certain you can shut the water off completely before starting, don’t start. Tell me what the problem is. We’ll figure out the rest from there. Call (850) 920-7745 and we’ll get you sorted.
FAQs
A genuine Kohler kitchen faucet in Orlando typically lasts 12 to 18 years before the cartridge or seals need replacing, though hard water in areas like Winter Park and Maitland can shorten that to 8 to 10 years. Regular vinegar cleaning of the aerator and spray head extends the life. Call (850) 920-7745 if yours is dripping or losing pressure.
Yes, in most cases a Kohler faucet can be repaired with a new cartridge, spray head, or seal kit rather than replaced, as long as the valve body itself isn’t cracked or corroded. We’ll tell you honestly which way makes better financial sense before any work begins. Estimates are free.
A focused fixture or sink replacement takes one visit, typically two to four hours. A full kitchen remodel takes four to eight weeks in Orlando, depending on cabinet lead times, countertop fabrication, and whether we’re pulling permits for plumbing or electrical changes. We’ll give you a written schedule before work starts.
Our trucks carry common Kohler cartridges, spray heads, aerators, supply lines, and drain assemblies for the fixture lines most common in Orlando homes, which means many repairs are completed the same visit. If your specific part isn’t on the truck, we order genuine Kohler and return as soon as it lands, usually within three to five business days.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
