







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Fence Installation: The Orlando Owner’s Guide
Kohler fence installation in Orlando typically runs between $3,500 and $9,000 installed, and the work usually takes one to two days once we have your specific Kohler product matched and on-site. Most homeowners discover they need this service the hard way – a gate that drags across the paver driveway, a post that’s started leaning after a summer of afternoon downpours, or a fence section that simply won’t latch anymore. Some jobs are straightforward post replacement and re-hanging. Others require matching Kohler hardware components that weren’t properly specified the first time around.
We’re Mason Remodeling Co Orlando, and we handle Kohler fence installation and repair across the metro, from Winter Park to Kissimmee and the neighborhoods in between. We’re an independent service provider – not affiliated with Kohler – but we work with their fence, gate, and railing hardware regularly enough to know which models hold up in Florida humidity and which ones need adjustment twice a year.
Which Kohler Models This Applies To

Kohler’s outdoor fencing and gate hardware line is smaller than their bath fixture catalog, but it’s specific. The parts we most often match for Orlando homeowners fall into three groups: aluminum fence panels and posts, driveway and pedestrian gates, and the latch and hinge hardware that comes with them. If your Kohler fence was installed as part of a new construction package in a community like Lake Nona or Baldwin Park, you’re likely dealing with their pre-finished aluminum line in black or bronze powder coat.
Here’s the compatibility gotcha we see regularly: Kohler fence posts and hinges from their older residential series (roughly pre-2018) don’t always accept the current replacement latch cartridge. The mounting hole pattern changed slightly, and forcing the new hardware in means drilling new holes in soft aluminum. Not ideal. Before ordering any part, we check the label on the inside face of the gate post or the underside of the latch. That tells us the series, and the series tells us whether we need OEM Kohler hardware or a quality aftermarket equivalent that fits without modifying the post.
For most Kohler fence work, OEM parts make sense when the fence is under warranty or when you’re in a community with strict appearance guidelines. Aftermarket equivalents from established suppliers often cost 30 to 50 percent less and hold up identically in Florida weather. We’ll show you both options with a written price before any work starts.
Styles & brands we work with







Signs Your Kohler Fence Installation Is Failing
- Gate drags on the ground at the latch end. This is almost always hinge wear or a post that’s shifted in sandy Orlando soil. The post may need to be re-set in concrete rather than the original shallow footer.
- Latch won’t catch unless you lift or pull the gate hard. The spring-loaded latch cartridge inside the Kohler handle has worn out, or the strike plate shifted when the post moved. Forcing it makes the wear worse.
- White chalky residue on the aluminum surface. Florida’s combination of UV, rain, and humidity breaks down the powder coat over time. The fence may still be sound, but the finish needs attention before pitting starts.
- Posts lean after heavy rain. Orlando’s wet season saturates the ground, and posts set in shallow concrete or plain dirt start to move. You’ll see it first at gate posts where the weight of the gate pulls them over time.
- Gaps between fence sections widen at the top. This is often the hardware connecting panels to posts failing, not the panels themselves. The Kohler brackets or screws may be corroding internally where you can’t see it.
Replacement Cost & What’s Included

In Orlando, Kohler fence installation and repair work runs from $3,500 to $9,000 installed. The spread comes down to what you’re replacing. A single gate post re-set with new hardware might land at the lower end. Full removal and re-installation of a fence line with new Kohler-compatible panels, posts set in proper concrete, and all new hardware pushes toward the higher end.
Every project gets a written price before we schedule. That price includes parts, labor, haul-away of old material, and a written guarantee with terms stated plainly – coverage lasts 365 days from the completion date. If the installation fails in that window, we come back and make it right at no charge. That’s the 365-Day Done Right Promise, and it applies to fence work the same as it applies to our kitchen and bathroom remodels.
What drives your specific price: total linear feet, how many posts need concrete work, whether your existing Kohler hardware can be salvaged, and whether the fence sits on level ground or along a slope where sections must be stair-stepped.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. With the gate closed, look at the gap between the gate and post at the top and bottom. If they’re uneven, you’ve got a hinge or post issue. You can also check exposed screws and brackets for rust or looseness. What you shouldn’t do is pull a post out of the ground and try to re-set it yourself – Orlando’s sandy soil makes it look easier than it is, and a post set at the wrong depth or without proper drainage will lean again within months. Gate springs and tension hardware can also release hard during removal, which is a genuine safety risk.
If the post has moved, if the hardware is Kohler-specific, or if you’re not sure which series you have, call us at (850) 920-7745. Tell me what the problem is. We’ll figure out the rest from there.
FAQs

A properly installed Kohler aluminum fence lasts 20 to 30 years in Orlando before the structure becomes a concern, though the powder coat finish usually needs attention at the 10 to 15 year mark depending on sun exposure. Gate hardware – latches, hinges, springs – has a much shorter life here, often 5 to 8 years because of humidity and daily use. Call (850) 920-7745 if your gate hardware is acting up, and we’ll tell you if it’s a repair or replacement.
Yes, in most cases. We can re-set leaning posts in concrete, replace worn latch cartridges, swap out corroded hinges, and re-coat sections where the finish has failed. Replacement only becomes necessary when the aluminum itself is bent, heavily corroded, or damaged beyond what new hardware can correct. Call (850) 920-7745 and we’ll assess what’s actually needed – the repair quote is free.
Most Kohler fence installation projects in Orlando take one to two working days. Post re-setting needs time for concrete to cure before we re-hang the gate, but we typically set posts in the morning and hang the next day. Larger fence lines or jobs with custom sections can run three days. We’ll give you a clear timeline in the written estimate before any work is scheduled.
We stock common Kohler latch cartridges, hinges, and gate hardware on our service vehicles, along with standard aluminum post and panel material that’s compatible with most Kohler fence series. For uncommon series or color-matched panels, we order from our supplier network and usually have it within a week. We’ll tell you upfront whether your parts are on hand or need to be ordered – no surprises.
Why Mason Remodeling Co Orlando for Your Kohler Fence Installation
Isaac Pruett grew up in Los Angeles, trained at Los Angeles Trade-Technical College, and has spent decades putting that education to work on real projects for real families. He and our crew have served Orlando homeowners for years, from gut-renovating kitchens in College Park bungalows near Edgewater Drive to handling full additions across the metro. The same standard applies to a fence job as to a kitchen: you know exactly who is coming, what it costs, and what’s guaranteed before work begins.
Every technician who arrives at your door is background-checked, identity-verified, and wearing a clean uniform with a photo ID badge. You’ll receive the technician’s name and photo before the visit, so there’s no wondering who’s knocking. That’s The Threshold Standard – a named process, not a policy we claim. And a live person answers our phone 24 hours a day, seven days a week, including weekends and holidays. No call trees, no voicemail loops.
We also work with other specification-grade brands beyond Kohler – KraftMaid and Cambria cabinetry, Silestone and Caesarstone surfaces – so if your fence project connects to a larger outdoor or bath update, we can handle that too. But for Kohler fence installation in Orlando, start with a call to (850) 920-7745 for a free estimate. You’ll get a written price before any work starts, and the job is covered by a 365-day written guarantee. That’s the deal, every time.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.


