Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Orlando Owner’s Guide
Blanco kitchen remodels in Orlando typically run $14,000 to $45,000 installed, depending on whether you’re replacing a sink and faucet or gutting the entire kitchen down to studs. We stock Blanco-compatible parts and can usually match your existing model series the same week you call. Most Orlando homeowners discover they need this page because a Blanco sink flange has started separating from the counter, a faucet cartridge has seized from hard water buildup, or they’re planning a full remodel and want to keep their existing Blanco sink while replacing everything around it.
Here’s what you need to know before you spend a dollar: Blanco has been manufacturing in Germany since 1925, and their part numbering system follows a strict convention. If you can photograph the model number printed on the underside of your sink or the base of your faucet, we can usually identify the exact replacement part within minutes. Mason Remodeling Co Orlando is an independent service provider, not affiliated with Blanco, but we’ve worked with their product lines long enough to know which parts interchange and which ones absolutely don’t.
Which Blanco Models This Applies To
Blanco splits its line into several families: Silgranit (their granite-composite sinks), stainless steel (the Precision and Super Single series), and ceramic (the Ikon and Metra lines). Each family has different mounting requirements and part compatibility. For example, Silgranit sinks use a specific undermount clip system that does not work on laminate countertops without reinforcement, a detail that catches a lot of DIYers off guard in Orlando’s older homes where laminate was the standard for decades.
The faucet side is more involved. Blanco uses ceramic disc cartridges across most modern models, but older units from the 1990s and early 2000s use compression cartridges that are no longer interchangeable. The model number is your friend here: check the cold water supply line connection or the underside of the spout base for a laser-etched number starting with “51” or “52” on most models sold in North America. As for OEM versus quality aftermarket, we generally recommend Blanco OEM parts for anything that touches water flow or the sink seal. For mounting hardware and trim pieces, aftermarket equivalents from manufacturers like Danco or Plumb Pak work fine and can save you 30 to 40 percent. We keep both options available and will tell you which makes sense for your specific situation, a conversation Isaac Pruett has had more times than he can count on job sites across Orlando.
Styles & brands we work with
Signs Your Blanco Kitchen Hardware Is Failing
- Water pooling around the sink rim. The undermount clips have loosened or the silicone seal has degraded. In Orlando’s humidity, silicone breaks down faster than in drier climates, and we see this failure most often on sinks installed 8 to 12 years ago.
- Faucet drips after you shut it off. The ceramic disc cartridge inside is worn or scored. Hard water in Orlando accelerates cartridge wear significantly, and most Blanco cartridges last 5 to 8 years here versus the 10 to 12 years you’d see in softer water areas.
- Low water pressure at the faucet only. The aerator is clogged with mineral buildup, or the supply line screen filter at the base of the spout has sediment trapped in it. This is almost always a fix you can do yourself in five minutes, and we’ll tell you exactly how below.
- Spray head won’t switch between stream and spray. The diverter valve inside the spray head mechanism has failed. On Blanco models, this is typically a replaceable component rather than a full faucet replacement, which is why having the exact model number matters.
- Rust or discoloration around the drain flange. The drain assembly gasket has compressed and lost its seal. In Orlando kitchens with steel under-sink cabinets, we see this worsen quickly because the trapped moisture accelerates corrosion on both the flange and the sink basin itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If you’re replacing just a Blanco part rather than doing a whole kitchen, here’s the honest breakdown for Orlando. A faucet cartridge runs $40 to $120 for the part plus typically $150 to $250 in labor. A replacement spray head runs $35 to $90. A sink re-seal with new undermount clips runs $250 to $450 including the silicone and hardware. A full sink replacement, Blanco Silgranit or stainless, runs $450 to $1,400 installed depending on the series and whether we need to modify the existing counter cutout. Countertop modification adds $200 to $600.
If you’re planning a complete kitchen remodel around your existing Blanco sink, the full project range is $14,000 to $45,000. That includes demolition, cabinetry, countertops, backsplash, plumbing, electrical, and permits. Every Mason Remodeling Co Orlando remodel comes with a written price before any work starts, so you’ll know the exact dollar figure before we unload a single tool. Our 365-Day Done Right Promise covers all labor and material defects for one year from the completion date. If something fails, we return at no charge to you. We also work with KraftMaid, Cambria, and Silestone for cabinetry and surfaces, which means you can match your Blanco sink to the rest of the kitchen without juggling multiple contractors.
DIY or Call Us?
Some Blanco fixes are genuinely simple. A clogged aerator unscrews by hand; soak it in white vinegar for an hour and reinstall. A stuck spray diverter sometimes just needs the spray head soaked in vinegar too, and the supply line screens can be cleaned with a small brush after shutting off the water valves under the sink. We’re happy to walk you through these over the phone at (850) 920-7745, because sometimes you really don’t need a service call.
The line where DIY stops making sense is anything involving the undermount seal or cartridge replacement. Getting the sink re-sealed wrong on a Silgranit sink means water working its way into your cabinet base, and once particleboard swells, you’re looking at cabinet repair costs that dwarf what the original seal would’ve run you. Cartridge replacement is straightforward for us because we know the torque specs and the order of operations for Blanco’s retaining rings, but a cracked retaining ring from over-tightening turns a $120 job into a $500 faucet replacement. Tell me what the problem is. We’ll figure out the rest from there.
FAQs
A Blanco Silgranit sink should last 20 to 25 years with normal use. The faucet is a different story: in Orlando’s hard water, most Blanco faucet cartridges wear out in 5 to 8 years, and the finish on brushed nickel starts showing its age around the 10-year mark. The sink almost always outlasts the faucet, which is why we recommend budgeting for a faucet refresh at least once over the life of the sink. Call (850) 920-7745 and we’ll tell you whether your specific model is worth repairing or replacing.
Yes, in most cases. Seals can be redone, clips can be replaced, and cartridges can be swapped. The exceptions are cracked Silgranit sinks, which cannot be patched reliably because the composite material doesn’t bond well to adhesives or fillers, and faucet bodies with internal corrosion at the connection points. We’ll give you a straight answer before you spend a dime, and our written estimates are free.
A faucet cartridge or spray head swap takes 45 minutes to an hour once we’re on site. A full sink re-seal runs about two hours including cleanup. A complete kitchen remodel with a new Blanco sink runs 3 to 6 weeks depending on cabinet lead times and the scope of countertop work. We schedule a specific arrival window, and the technician’s name and photo come to your phone before we show up, part of the Threshold Standard we’ve held since 2004.
We keep common Blanco cartridges, spray heads, and mounting hardware on the truck for the most frequently installed series in Orlando homes. If your model needs something outside our truck stock, we source direct from Blanco’s North American distribution network and most parts arrive within 3 to 5 business days. We’ll tell you exactly what we have and what we need to order before you commit to anything.
If you’re planning a Blanco kitchen remodel in Orlando, start with a phone call. We’ll talk through your model number, give you an honest read on whether repair or replacement makes sense, and put a written price in your hands before any work begins. Call (850) 920-7745 for your free estimate.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
