Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Bathroom Remodeling: The Orlando Owner’s Guide
If you have an Atlas bathtub, shower pan, or surround that has cracked, faded, or pulled away from the wall, we stock and install Atlas-compatible bathroom remodeling materials across Orlando, and a full replacement typically runs $9,000 to $28,000 depending on the size of the space and what’s behind the walls. Most owners discover the failure the hard way: a soft spot in the shower floor, water staining on the ceiling below, or a crack that started as a hairline and grew into something you can feel with your thumbnail. You want the part matched, priced, and handled before water gets into the framing. That’s exactly what this page is for.
One thing up front so there’s no confusion: Mason Remodeling Co Orlando is an independent contractor. We are not affiliated with Atlas, but we work with their materials every week and we know what fails, what lasts, and what fits. If your Atlas product came from a big-box store or was installed by a builder, we can still match it.
Which Atlas Models This Applies To
Atlas produces several lines of tubs, shower pans, and wall surrounds, and they are not all the same. The most common in Orlando homes are the Atlas Pro-Fit series (three-piece alcove surrounds) and the Atlas DuraBase pans (often paired with tile walls). The compatibility gotcha: Atlas changed the drain center on some DuraBase pans between 2016 and 2018. If your pan is cracked and you’re trying to match an existing drain rough-in, the old center-to-stud measurement matters more than the model name stamped on the underside. We always measure the actual pan, not just the paperwork.
For OEM Atlas parts, the original part number is usually molded into the underside of the pan or the back of a wall panel. For aftermarket equivalents, brands like Delta and American Standard make surrounds that fit standard 60-inch alcoves, but the valve and drain locations rarely line up perfectly. In our experience, an aftermarket surround saves money on materials and costs it back in labor. We’ll give you the straight numbers either way before you commit.
Styles & brands we work with
Signs Your Atlas Bathroom Remodeling Is Failing
- A hairline crack in the shower pan or tub floor that catches a fingernail. Atlas pans are fiberglass-reinforced, and once the gel coat cracks, water wicks into the fiberglass and the crack spreads. This is the most common failure we see in Orlando, and it’s rarely repairable in a way that lasts.
- Soft spots when you stand in the tub or pan. The pan has delaminated from its substrate. The flexing you feel is the fiberglass moving independently. This only gets worse, and it usually means water has been getting underneath for months.
- Water staining on the ceiling below the bathroom. By the time you see this, the pan or the drain gasket has been leaking for a while. The good news is the leak is almost always at the drain assembly or the pan edge, not in the plumbing lines.
- Caulk that keeps pulling away from the wall panels or the pan edge. Fiberglass surrounds flex with temperature changes, and in Florida’s heat-and-humidity swings, that flex is constant. If the caulk keeps separating, the surround may be moving more than it should.
- Discoloration or a chalky, rough surface that won’t clean up. The gel coat is worn through. The surface is now porous, and that’s why it stains, holds soap scum, and feels rough. No cleaner fixes this.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Atlas bathtub or shower replacement in Orlando runs $9,000 to $28,000. That’s not a vague range. The spread is driven by what’s behind the walls and what you want in front of them. A basic alcove tub with a three-piece surround, where the framing is dry and solid, lands near the lower end. A larger walk-in shower with a tiled floor, a glass enclosure, and rot repair at the studs lands near the top. In Orlando specifically, we price for the possibility of moisture damage behind fiberglass surrounds. Homes in College Park, Baldwin Park, and Delaney Park with original mid-century bathrooms often have water-damaged subfloor that has to come out. That’s the difference between a $9,000 job and an $18,000 job, and we’ll tell you which one you have before we start.
The price includes demo and haul-away of the old unit, any necessary framing and subfloor repair, the new tub or pan and surround, plumbing connections at the drain and valve, waterproofing, caulk and trim, and a written warranty. Our warranty is simple: 365 days from the completion date. If the work isn’t right, we come back and make it right at no cost to you. That’s the 365-Day Done Right Promise, and it’s written into every contract we do.
DIY or Call Us?
You can safely check a few things on your own. Look under the pan if you can: is the floor wet? Is the drain gasket cracked or missing? Measure the pan and take a photo of the model stamp. Those three things help us quote accurately before we arrive. What you should not do is attempt to pull a failed Atlas pan yourself. The pan is typically set in a mortar bed, and pulling it without cutting the drain and properly supporting the new one is how homeowners end up with a cracked new pan and a leaking drain. Same goes for any valve or supply work. Water in a second-floor bathroom does more damage in one weekend than the labor you’d save in a month.
If you’ve got an Atlas bathroom that’s failing, call us at (850) 920-7745. Tell me what the problem is. We’ll figure out the rest from there.
FAQs
An Atlas fiberglass unit in a Florida home typically lasts 12 to 18 years before the gel coat fails, the pan flexes, or the drain gasket gives out. Humidity and hard water from the Florida aquifer shorten the surface life compared to drier climates. If your Atlas unit is past year 15 and showing cracks or staining, replacement is nearly always more cost-effective than repair. Call (850) 920-7745 for an exact quote. Estimates are free.
Surface patches on Atlas fiberglass pans rarely last more than a year because the pan continues to flex at the crack line, re-opening the repair. A proper fix usually means replacement of the pan or the entire unit. If the crack is small and the pan is otherwise solid, we’ll be honest about whether a patch can buy you time. But we won’t sell you a repair we don’t believe in. Call (850) 920-7745 and we’ll give you a straight assessment.
Most of our Atlas bathroom replacements in Orlando take three to five working days from demo to final caulk. If we find rot in the subfloor or framing, add a day or two. You’ll have a written schedule before we start, and the price doesn’t change if we find hidden damage. That’s the whole point of putting the price in writing first.
We keep common Atlas-compatible drain assemblies, gaskets, and trim kits on our trucks, and we also stock parts for KraftMaid, Cambria, and Silestone since we work across kitchen and bath remodeling. For the tub or pan itself, we order the exact unit to match your measurements, and that usually takes three to five business days. Call (850) 920-7745 and we’ll confirm what’s available for your model before you spend a dime.
If you’re dealing with a cracked Atlas tub, a shower pan that’s gotten soft, or a surround that’s pulling away from the wall, don’t wait until the ceiling below tells you about it. Call Mason Remodeling Co Orlando at (850) 920-7745 for a free estimate. A live person answers, any day, any hour. We’ll walk you through what we need to know, give you a written price before any work starts, and make sure you know exactly who’s coming to your door before they arrive.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
