







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Driveway & Pavers: The Orlando Owner’s Guide
Tamko driveway pavers and resurfacing systems in Orlando typically run $7,000 to $18,000 for full paver driveway installation, with repair and replacement work on individual sections usually landing between $1,200 and $4,500 depending on what’s failed. We stock Tamko-compatible materials and match existing pavers by size, color, and wear pattern so you’re not looking at a patch that screams “new part.” Most Orlando homeowners call us after a summer storm exposes a sunken paver section, or when a car tire drops into a soft spot that wasn’t there last spring.
What you’re dealing with is usually one of three things: a base failure under the pavers, edge restraint that’s let go, or a paver itself that’s cracked under Florida’s heat and traffic load. The good news is none of these require tearing out the whole driveway. The honest news is a patch done wrong looks wrong for years. We’ll walk through how to tell what’s happening, what it costs, and when you actually need a pro.
Which Tamko Models This Applies To

Tamko produces several driveway and paver product lines, and the right replacement part depends on which one is underfoot. The most common in Orlando are the Tamko Heritage and Tamko Mission lines, plus their newer composite paver systems designed for Florida’s soil movement. Each line uses specific joint widths, thicknesses, and color blends that don’t always cross-match. A Heritage paver next to a Mission paver looks close at a glance, but the color cast and edge bevel sit differently, and that mismatch becomes obvious in afternoon light.
To identify what you have, look at the underside of a loose or lifted paver. Tamko stamps a mold number and lot code on most units. Bring us a photo of that stamp, or better, bring the paver itself. If the pavers are locked into place and nothing’s loose, measure the exposed face. Heritage pavers typically run 60mm thick for residential driveways, while some Mission units clock in at 80mm for heavier traffic. That thickness difference matters when we’re ordering replacements because a 60mm unit set into an 80mm bed will sit low and collect water.
You’ll also find Tamko products installed in Orlando communities from College Park to Lake Nona, and the original installer doesn’t always leave paperwork behind. We keep references for original Tamko color codes and can order OEM replacements, or in many cases match with quality aftermarket equivalents from manufacturers like Belgard or Techo-Bloc when the original line has been discontinued. The decision comes down to whether you want an exact continuation of the existing pattern or a strong match that saves you money and still looks like it belongs. We’ll show you samples before any work starts, so there’s no guesswork.
Styles & brands we work with







Signs Your Tamko Driveway & Pavers Is Failing
- Low spots that hold water after rain. This is base settlement under the pavers, not a paver problem. Orlando’s sandy soil shifts more than clay-heavy regions, and if the original base wasn’t compacted properly, water pools in the low areas and accelerates the failure. You’ll see it most after a hard summer downpour.
- Pavers rocking or clicking when you walk on them. The joint sand has washed out or the bedding layer has eroded. In Orlando, our daily afternoon thunderstorms flush sand through the joints faster than most parts of the country. A paver that rocks is one that will crack under car weight within a season.
- Edge pavers spreading outward. The edge restraint has failed or was never installed correctly. This is the biggest structural issue we see on Tamko driveways in neighborhoods like Baldwin Park and Winter Park. Without a solid edge, the whole field of pavers slowly migrates, and the failure cascades.
- A cracked paver in a high-traffic line. Usually at the center of the driveway where tires track. Tamko pavers are durable, but a paver sitting on a soft spot will flex and eventually crack. One cracked paver often means the base below it is compromised too.
- Color fading that looks uneven. Florida UV exposure is brutal on paver color, and Tamko units sealed with the wrong product will fade unevenly. That’s less of a structural failure and more of an appearance issue, but it matters when we’re matching replacements. An unsealed or improperly sealed surface ages differently than the rest of the driveway.
Replacement Cost & What’s Included

Here’s the pricing picture for Tamko driveway and paver work in Orlando, using the same numbers we’d give you on the phone:
- Full paver driveway installation: $7,000 – $18,000 depending on square footage, base condition, and pavers chosen
- Section repair (base + pavers replaced): $1,200 – $4,500 for typical failure areas of 200 – 400 square feet
- Edge restraint repair/replacement: $16 – $24 per linear foot, materials and labor included
- Paver sealing (full driveway): $800 – $1,600 for a residential double driveway, product and application included
- Driveway replacement (demo + new base + pavers): $5,000 – $14,000 depending on driveway size and access
What drives the range is the condition of what’s underneath. If the base is solid and we’re replacing a section of pavers, you’re on the lower end. If water has washed out the base and we’re excavating and recompacting, the price rises because we’re doing the job right, not masking the problem. Every quote is a written line-item price before any work starts, and our 365-Day Done Right Promise covers the installation for a full year from the completion date. If something fails in that window, we fix it at no cost to you.
Mason Remodeling Co Orlando is an independent service provider. We are not affiliated with Tamko, but we work with their products every week and know how they behave in Florida’s soil and climate.
DIY or Call Us?
There are honest things you can check yourself before you spend a dime. Pull up a loose paver and look at the sand bed under it. If the sand is still there and dry, you may just need joint sand swept back in. If the sand is gone or soaking wet, you’ve got a drainage or base issue that’s bigger than the surface. You can also run a hose across the driveway and watch where water pools. Where it pools is where it fails, eventually.
What we don’t recommend is replacing pavers on your own if you’ve never matched Tamko color codes or compacted a paver base. The part itself isn’t dangerous to handle, but getting the base wrong is how you end up with a second failure in the same spot two years later, and now you’ve spent money twice. Cutting edge restraints and compacting base material correctly requires equipment most homeowners don’t keep in the garage. If you’re unsure, call (850) 920-7745 and tell us what you’re seeing. Isaac Pruett will walk you through what’s likely happening, and we’ll come out and confirm it in person if the job warrants it.
How Much Does It Cost to Repair a Tamko Driveway Section in Orlando?
Section repair on a Tamko driveway in Orlando typically costs $1,200 to $4,500 for an area of 200 to 400 square feet, including labor, base repair, replacement pavers, and joint sand. Smaller isolated paver replacements run $300 to $800. The price hinges on whether the base under the pavers is intact. If we’re pulling pavers, excavating a washed-out base, recompacting, and reinstalling, the price lands in the upper range. If the pavers failed but the base is solid, you’re looking at the low end. Call (850) 920-7745 for a written line-item estimate, free.
See the difference
Before
After
Before
After
Before
AfterCan a Tamko Driveway Be Repaired Instead of Replaced?
Yes, in most cases a Tamko driveway can be repaired instead of replaced. Pavers are individual units, which is the advantage over poured concrete. When one section fails, we pull that section, repair the base, and reinstall matching pavers. Replacement is only the right answer when the base failure extends across most of the driveway, or when the pavers themselves are so faded that new ones can’t be matched to the old. For a full price breakdown on your specific situation, call (850) 920-7745.
How Long Does a Tamko Paver Driveway Last in Orlando?
A properly installed Tamko paver driveway in Orlando lasts 25 to 40 years on the paver surface itself, but the sand and base layers typically need attention every 8 to 12 years in Florida’s climate. The surface units hold up well. It’s the joint sand and edge restraints that take the beating from Orlando’s rain cycle. Expect to reseal every 3 to 5 years if the driveway faces full sun. We can inspect what you have and let you know where you are in that timeline for free.
Do You Stock Tamko Pavers, or Do I Need to Wait for Shipping?
We stock common Tamko paver sizes and colors on our truck and in our yard, and we can order specific color codes that aren’t on hand. Most common Mission and Heritage replacements are available for slip-sheet pickup or standard delivery. If you send us a photo of the paver and the stamp code, we’ll match it before we arrive. Call (850) 920-7745 and tell us what the problem is. We’ll figure out the rest from there.
Contact Mason Remodeling Co Orlando

If your Tamko driveway or pavers are failing in Orlando, call (850) 920-7745 for a free estimate. We’ll match the part, price the job in writing, and tell you exactly who is coming to your door before they arrive. No surprises, no vague verbal estimates, no pressure. Just a straight answer and a fixed price.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.


