Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Orlando Owner’s Guide
If you have a Boral window or door with a failed sash, hinge, roller, or hardware assembly, we match the part to your specific line and install it correctly. Most Boral window and door component replacements in Orlando run $180 to $850 installed depending on the part, and we stock the most common Boral-compatible hardware on our trucks. The way Orlando homeowners usually discover the problem is unglamorous: a window that suddenly won’t stay up, a sliding door that grinds across its track like it’s dragging a bag of gravel, or a lock that refuses to catch.
We’re Mason Remodeling Co Orlando, an independent home-services company. We are not affiliated with Boral, but our crews have years of hands-on time with their window and door lines, and we speak the parts language fluently. Isaac Pruett has been the steady hand behind our Orlando operation for years, and he still believes the fastest way to solve a window problem is to look at the part, name the part, and get the right version of the part on the first trip.
Which Boral Models This Applies To
Boral’s footprint in Florida skews toward their impact-rated aluminum and vinyl window lines, plus their sliding glass and hinged patio doors. The parts that fail on those units are not universal. A Boral Builder Series single-hung uses a different balance system than a Boral impact casement window, and the door rollers in their vinyl sliders are not interchangeable with the aluminum frames. If you try to force a generic part into a Boral track, you’ll know within a week because the door will bind or the window will sag.
Here’s the compatibility gotcha that catches Orlando homeowners: Boral hardware is often identified by a small stamped code on the metal itself, not by a model number printed on the glass. Look at the sash lock, the hinge leaf, or the roller housing and you’ll usually find a two-to-four character stamp. That stamp, plus your rough opening measurements, is how we pin down the exact OEM or quality aftermarket equivalent. For Boral specifically, we default to genuine Boral-origin hardware when it’s available and still supported, because their impact-rated frames have tighter tolerance than generic replacements account for.
We also carry parts for KraftMaid cabinetry, Cambria surfaces, and Silestone surfaces, so if your Boral project touches other pieces of the house, we can usually address those in the same visit.
Styles & brands we work with
Signs Your Boral Windows & Doors Is Failing
- Window sash drops when you raise it. The block-and-tackle or spiral balance inside the jamb has lost tension. In Orlando humidity, the balance tube can corrode faster than in drier climates, and the window suddenly weighs twice what it should.
- Sliding door sounds like it’s chewing metal. The roller wheels are flat-spotted or the bearings have seized. Florida’s fine grit and sand work their way into the roller housing and grind the wheel down until the door rides on the frame itself.
- Lock or latch won’t engage. The keeper and the lock body have shifted out of alignment, usually because the door or sash has settled. You can see daylight or feel play at the meeting rail even when the lock is thrown.
- Condensation or fog between the panes. The insulated glass unit’s seal has failed. In Orlando’s hot, humid summers, a failed seal shows up fast, and the fog doesn’t clear when the sun hits the glass because the moisture is trapped inside.
- Water staining at the sill or frame corners. Weep holes are clogged or the weatherstripping has compressed flat. Heavy Orlando afternoon downpours push water into the track, and if the drains can’t shed it, the water finds the frame interior.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are honest installed price ranges for Boral window and door parts in Orlando. These include the part, labor, and disposal of the old component, and we give you a written price before any work starts, every time.
| Part or Service | Installed Price Range (Orlando) |
|---|---|
| Sliding door roller replacement (pair) | $180 – $380 |
| Window balance or spring replacement (per sash) | $150 – $300 |
| Sash lock or latch replacement | $90 – $220 |
| Weatherstripping and seal replacement | $120 – $350 |
| Hinged door hinge replacement (set) | $180 – $420 |
| Insulated glass unit replacement (per pane) | $350 – $850 |
The spread depends on whether your Boral unit is impact-rated, how large the sash or door is, and whether we’re matching OEM hardware or a quality aftermarket equivalent. When the part is a high-tension window balance, we recommend a trained technician handle it: the spring is under constant load, and a 12-year-old window can still snap with enough force to break a finger. Our work carries a written guarantee with clearly stated terms, and if a repair or installation fails within 365 days of completion, we return and make it right at no cost to you under our 365-Day Done Right Promise.
DIY or Call Us?
What an Orlando homeowner can safely check: clear debris from the track, confirm the weep holes aren’t packed with pollen and sand, and note the stamped code on the hardware so you know what you’re dealing with. That’s useful information for us, and we’ll ask for it when you call.
Where DIY goes wrong with Boral parts is the moment you’re working against a loaded balance spring, or prying a roller out of a frame that’s been heat-warped for fifteen Florida summers. These parts are under tension and tucked into tight extrusions. One slipped pry bar turns a $200 roller job into a bent track, a cracked frame, or a trip to urgent care. “Tell me what the problem is. We’ll figure out the rest from there.” That’s how Isaac runs the shop, and it’s why our phone is answered by a live person, not a voicemail tree. Call (850) 920-7745 and describe the symptom. We’ll bring the right part and a photo-badged, uniformed crew to your door.
FAQs
A well-maintained Boral impact window in Orlando typically lasts 20 to 30 years before the frame or hardware needs meaningful work, but the moving parts fail sooner. Rollers, balances, and weatherstripping often need attention at the 8 to 15 year mark because heat, humidity, and wind-driven sand wear them out faster than the glass or frame itself. Call (850) 920-7745 for an honest assessment of your specific unit.
Some parts can be rebuilt, but most Boral hardware is designed for replacement rather than repair. A roller assembly with a seized bearing, for example, is cheaper to swap than to machine back to life. We’ll tell you which way makes sense for your part before any work begins, and the estimate is free.
Most Boral window and door component replacements take 45 minutes to two hours on site, depending on the part and how much cleaning the frame needs. If the insulated glass unit has failed, that’s usually a separate trip because the replacement pane is ordered to your exact measurements. Call (850) 920-7745 and we’ll give you a straight answer about timing for your specific model.
We stock common Boral-compatible rollers, balances, locks, and weatherstripping on our trucks, so most Orlando calls are handled in one visit. For less common impact-rated hardware or specific insulated glass units, we order direct and schedule the install when the part lands. Tell us the stamped code on your hardware and we’ll confirm stock before we head your way.
If you have a Boral window or door part that’s failed or failing, call Mason Remodeling Co Orlando at (850) 920-7745 for a free estimate and a written price before any work starts. We’ll name the part, price it honestly, and install it right.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
