Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Orlando Owner’s Guide
If you have ES Windows products in your Orlando kitchen and something’s failed, here’s the straight answer: a full ES Windows-integrated kitchen remodel in Orlando runs $14,000 to $45,000 installed, and we stock or can source ES Windows-compatible parts for most series within days, not weeks. Most homeowners discover a problem the same way: a window that won’t seal against Florida humidity, a frame that’s warped enough to let afternoon rain drip onto the counter, or hardware that’s finally given out after years of daily use. You don’t need to replace the whole kitchen to fix one bad window, but you do need someone who knows how ES Windows frames interact with cabinetry, drywall returns, and Orlando’s particular moisture load. That’s what this page is for.
Key Takeaways:
- ES Windows kitchen remodeling in Orlando typically costs $14,000 – $45,000 depending on window count and kitchen scope.
- We identify your ES Windows series by the etched corner code or sticker on the frame edge before quoting anything.
- You get a written price before work starts, and every install carries a 365-day written guarantee.
- Call (850) 920-7745 and a live person answers. Not an answering service, not a call tree.
Which ES Windows Models This Applies To
ES Windows makes several product lines, and the frame depth, glass pack, and hardware differ between them. The most common series we see in Orlando kitchens are the ES-2000 single-hung, the ES-7000 casement, and the ES-9000 impact-rated line. The ES-9000 is the one we see most in homes built or renovated after Florida’s 2002 building code changes, and it’s the one that gives homeowners the most confusion when a component fails. Here’s the compatibility gotcha: an ES-9000 sash from 2015 is not the same as one manufactured in 2023, even though the exterior looks identical. ES Windows changed the balance shoe profile and the tilt-latch spacing on several runs. If you order a sash online based on “ES-9000” alone, it’s a flip of a coin whether it seats properly. We pull the old sash, read the etched corner code, and match by that, not by catalog photo. When your model is discontinued, a quality aftermarket equivalent from a legitimate extruder is fine for non-impact applications. For impact-rated openings, we only use OEM ES Windows parts, because the Florida product approval on the assembly depends on it.
We also regularly work around other brands in Orlando kitchens: KraftMaid cabinetry, Cambria and Silestone countertops. If your ES Windows failure happened because a countertop install or cabinet reface put pressure on the frame, we’ll catch that and fix the cause, not just the symptom.
Styles & brands we work with
Signs Your ES Windows Kitchen Remodeling Is Failing
- Condensation or fogging between the glass panes. The seal on the insulated glass unit has failed, and Orlando’s year-round humidity makes this worse than in drier climates. Once the desiccant inside the spacer bar is saturated, the only real fix is a new IGU.
- The window won’t stay open or now falls shut with a bang. The balance shoes or coil springs inside the jamb are shot. On ES Windows kitchen units, this often shows up first on the window over the sink, because it gets used more than any other.
- You can feel air or see daylight at the weatherstripping. The original pile or fin-seal weatherstripping has compressed flat. In Orlando, this turns into an energy bill problem and an ant problem, because ants find their way through any gap.
- The frame shows white oxidation or powdery residue. On aluminum ES Windows frames near a dishwasher or cooktop, years of heat and steam cycles break down the finish. It starts cosmetic, but once the anodizing or powder coat is compromised, the aluminum underneath begins to pit.
- The crank or handle turns without moving the sash. The operator gear on a casement window is stripped, or the torque bar is sheared. This one’s common on ES Windows in Orlando kitchens where the window is behind a tall faucet and people over-extend the crank to reach it.
Replacement Cost & What’s Included
In Orlando, a kitchen remodel that includes replacing or refitting ES Windows runs $14,000 to $45,000. The range breaks down by scope: a small galley kitchen with two windows might fall around $14,000 to $20,000, while a large open-plan kitchen with a window wall, new cabinetry, counters, and an island can hit the high $30,000s or beyond. Window work by itself is narrower: expect $800 to $2,500 per window opening for parts and labor depending on sash vs. full frame replacement. What drives the number higher: impact-rated glass, full-frame tear-out rather than sash-only, stucco or tile repair around the opening, and any cabinet work needed to free a window that was installed too tight. You get a written line-item price before we touch a tool. No verbal “rough figure” that grows by Friday. The install carries a 365-day written guarantee on every window opening and every piece of trim we set.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things are safe to check yourself. You can note the etched corner code on the glass, measure the visible glass width and height to the nearest 1/8 inch, and take a photo of the hardware from inside and outside. That helps us match your part before we arrive. What I wouldn’t do yourself is remove a sash from a double-hung or casement unit that’s under load. The old balance shoes on some ES Windows models still carry tension even when the sash is down, and if you don’t know how to release it, the sash can drop hard on your hands. If the window is over a counter or backsplash, one wrong move and you’re buying tile work you didn’t plan for. Call (850) 920-7745, tell us the code on the glass and what the window is doing, and we’ll confirm the part and the price in writing before you commit to anything.
FAQs
In Orlando’s heat and humidity, expect 18 to 25 years from ES Windows frames, with the glass seals on some units failing sooner, especially on the south and west exposures where the afternoon sun beats hardest. You can stretch the frame life by keeping the weep holes clear and the tracks clean, but once the frame is pitted or the glazing channel is galled, replacement is the honest fix. Call (850) 920-7745 and one of our crew will tell you if your specific window is worth saving.
Small items are repairable every day: balance shoes, tilt latches, operator gears, weatherstripping, and crank handles can be swapped in an hour. The glass unit itself is not repairable once the seal between panes has failed, and a frame that’s heavily pitted or bowed from years of Orlando moisture is a replace, not a repair. We’ll show you the difference on your window before you approve anything. For an exact quote, call (850) 920-7745.
A sash-only replacement for a typical ES Windows kitchen unit takes about 60 to 90 minutes per window once the part is in hand. A full frame replacement that involves trim, caulking, and drywall or tile touch-up runs a full day for two windows. We protect the counters and floors before we start, and the job site is cleaned at the end of the day, every day.
Our Orlando crews carry the most common balance shoes, tilt latches, weatherstripping, and operators on the truck, and we can source ES Windows OEM sashes and glass units from regional distributors within 3 to 5 business days in most cases. Impact-rated assemblies sometimes run a week to 10 days because the glass is cut to your size and laminated, not pulled from a shelf. Call (850) 920-7745 with the etched corner code and we’ll tell you the same day whether the part is on hand or ordered.
Contact Mason Remodeling Co Orlando
If your ES Windows kitchen window is fogged, stiff, leaking, or just flat-out broken, start with a phone call. You’ll reach a live person at (850) 920-7745, and that person will put you in touch with someone who can talk parts, price, and schedule in the same conversation. We send a written price before any work begins, and the person who shows up is background-checked, uniformed, and holding a photo ID at your door. Tell me what the problem is. We’ll figure out the rest from there.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
