Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Orlando Owner’s Guide
If you have an ES Windows window or door that has a failed part, a full replacement is rarely your only option. We match and install ES Windows-compatible hardware, rollers, weatherstripping, locks, and operators in the Orlando area, with most parts installed for $180 to $650 depending on what failed and how accessible it is. Homeowners typically discover the problem when a sliding door starts grinding, a casement crank stops biting, or a french door won’t latch against the weather.
Mason Remodeling Co Orlando is an independent service provider, not affiliated with ES Windows. What we do have is direct experience with their product line in Central Florida’s climate, a truck stocked with the parts that fail most often, and a written price before we touch anything.
Which ES Windows Models This Applies To
ES Windows builds aluminum impact-rated windows and doors, common across Orlando from Dr. Phillips lakefront homes to Winter Park ranch houses. The model number is usually printed on a label on the frame edge or bottom rail. Look for a white or silver sticker with two lines of text. The series matters because hinges, rollers, and lock sets are not universal across all ES Windows products. A hardware set from their Series 500 casement line won’t fit the Series 900 impact-rated sliding door, and mixing them causes exactly the kind of binding and premature wear that brought you here in the first place.
For OEM parts, ES Windows hardware is sourced through their distribution network, and lead time varies widely depending on the part. That’s often the deciding factor for Orlando owners. A specialty operator gear might take three weeks to arrive, while a quality aftermarket equivalent, machined to the same dimensions, can be on the truck tomorrow. We stock both paths. Our recommendation: if the part is visible hardware like a handle or latch, aftermarket equivalents from brand-name hardware manufacturers perform equal to OEM at 30 to 50 percent less. If the part affects the structure, like a sill wedge or side rail, stick with OEM and wait the lead time. We’ll tell you which category your part falls into before you spend a dollar.
Styles & brands we work with
Signs Your ES Windows Windows & Doors Is Failing
- Sliding door drags or you hear grinding when it moves. The roller carriages are worn or the bearings have seized. In Orlando’s humidity, steel rollers pit and catch; the older ES Windows models used steel wheels that rust. Newer models use nylon or stainless.
- Casement or awning window crank turns but the sash won’t move. The operator gear teeth have stripped. This happens when the window is forced past its stop, or when years of rain and sun have eaten the lubrication and the gear binds until it breaks.
- French door won’t close flush at the top or bottom corner. Hinge sag or a failed corner miter. ES Windows doors resist hinge sag well, but the mitered corners are under constant load on taller units, and once the miter separates you lose your seal.
- Water streaks or staining on the interior drywall at window corners. The weep system is blocked or the sill gasket has flattened out. Rain in Orlando doesn’t fall at an angle, it blows sideways at 40 miles per hour in a summer storm. A flattened gasket will show itself quickly.
- Lock or handle feels loose, or the key turns without engaging. The lock body has separated from the wood or aluminum, or the hook bolt geometry is off. This is less about security than it sounds; it means the hardware mounting points have deteriorated.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Orlando homeowners should expect to pay for ES Windows-specific part replacement, installed:
- Roller replacement (sliding door): $180 to $390 per panel
- Casement or awning operator replacement: $220 to $480 per window
- Weatherstripping and sill gasket replacement: $120 to $310 per unit
- Lock set or multi-point lock body: $200 to $500 per door
- Hinge replacement or corner miter repair: $260 to $650 per door
The range depends on part access, whether the frame has moved or warped the surrounding opening, and whether we’re reusing the original glass or reinstalling fresh glazing gaskets. Every price is written and line-itemed before work begins, so you’ll see the part cost, labor, and any shop work required. If we quote you $410, you pay $410. The workmanship is covered by our written guarantee for 365 days from the completion date.
DIY or Call Us?
Here’s the honest division. If you have a loose handle, a missing screen clip, or a weatherstrip gap you can see, those are things a patient owner can handle with a screwdriver and a free afternoon. But roller replacement on an ES Windows sliding door is a two-person job, door off, sash flat, corner screws out. If you drop the panel, it’s not a trip to the hardware store, it’s a new door at $1,200 plus. Same with operator gears. The wrong torque on the retaining screw strips the internal splines, and suddenly your $40 part is a full sash overhaul.
If you’re not sure what you’re looking at, call us at (850) 920-7745. Describe the symptom, send us a photo of the label, and we’ll tell you over the phone whether it’s a Saturday morning job for you or something we should handle. Tell me what the problem is. We’ll figure out the rest from there.
FAQs
In Orlando’s humidity and salt-adjacent air, expect 8 to 15 years from rollers, operators, and weatherstripping, depending on the model and exposure. East-facing lanai doors degrade faster than north-facing fronts. If parts are original and the home is 15 years old, budget for replacement.
Some parts can be rebuilt, rollers can be re-crimped, lock bodies can be reworked, but we generally replace failed hardware rather than patch it. The repair labor often costs more than the new part, and a rebuilt part in year 12 fails again in year 13. Call (850) 920-7745 and we’ll give you a straight answer after seeing the part.
Most single-part replacements take 60 to 90 minutes once we’re on site. Complex jobs, like a miter repair requiring glue set time, take a half day. We’ll schedule it, show up when we say we will, and leave the area clean.
We stock the common-failure parts on the truck: rollers, handles, locks, and standard weatherstripping for ES Windows doors and casement lines. Oddball parts and OEM-only pieces come from the supplier network, which runs 3 to 14 days in most cases. We’ll tell you which category yours falls into and put it in writing.
If you’re in Orlando with an ES Windows window or door that won’t shut, slide, or seal, call us at (850) 920-7745 for a free estimate. We’ll get you a written price before we start, and the work is guaranteed for a full year.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
