Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Orlando Owner’s Guide
Barrette roofing products, including their ridge caps, hip and ridge shingles, and accessory lines, can usually be matched and installed in Orlando for between $400 and $1,800 depending on the part and the size of the affected roof section. Most homeowners discover a failed Barrette component after a storm, during a routine gutter cleaning, or when a leak shows up on the ceiling. We stock common Barrette-compatible parts on our trucks and can tell you over the phone whether your issue is a simple swap or something that needs a closer look.
What typically happens: a ridge cap cracks, a hip shingle lifts, or a seal strip gives out after years of Florida sun and afternoon downpours. You spot a dark stain on the ceiling, or a piece of shingle in the yard after a windy night. That’s usually the moment a homeowner starts searching for “Barrette roofing parts Orlando” and lands here. Tell me what the problem is. We’ll figure out the rest from there.
Which Barrette Models This Applies To
Barrette manufactures roofing components under several product lines, and the part you need depends on which one your roof carries. The three most common in Orlando are the Barrette Cedar Ridge hip and ridge cap system, the Barrette Seal-A-Ridge line, and their standard 3-tab and architectural shingle profiles sold through regional suppliers. Each line uses different dimensions and nail patterns, so a Cedar Ridge cap won’t always seat correctly on a roof built with Seal-A-Ridge.
The fastest way to identify what you have is to check the underside of a loose or damaged piece for an embossed product code. If that’s not readable, measure the exposed width: Cedar Ridge caps typically expose 8 inches, while Seal-A-Ridge exposes closer to 5-5/8 inches. We also match by color, and we keep a swatch set on the truck. If the roof is older than about 12 years, matching the exact dye lot is rarely realistic. In that case we carry quality aftermarket equivalents that install cleanly and hold up in Orlando’s wet summers, and we’ll show you both options before any work is scheduled.
One honest note: Mason Remodeling Co Orlando is an independent service provider. We install and repair Barrette-compatible roofing products, but we are not affiliated with or endorsed by Barrette itself.
Styles & brands we work with
Signs Your Barrette Roofing Is Failing
- Curling or lifting shingle edges. Florida’s heat breaks down the adhesive seal strip on Barrette shingles faster than in cooler climates. Once the edge lifts, wind gets under it and the shingle becomes a tear-off risk in the next storm.
- Granules collecting in gutters or at downspout bases. Granule loss is normal as shingles age, but a sudden heavy deposit usually means the asphalt layer is degrading, which shortens the remaining roof life significantly.
- Ridge cap pieces missing or cracked. Ridge caps take the most direct wind load on an Orlando roof. A cracked or missing cap lets water run down the ridge line and into the attic, often far from where the leak shows on the ceiling.
- Dark streaks or ceiling stains under the ridge or hip line. If the stain aligns with a ridge or hip rather than a flat shingle field, suspect the cap system before the shingles. This is one of the most common misdiagnoses we correct on service calls.
- Visible nails backing out. Thermal expansion in Orlando’s temperature swings can push nails upward through Barrette shingles over time. A raised nail head is a direct water entry point and should be addressed before it rusts through.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Barrette-compatible roofing repairs in Orlando, our installed pricing typically falls between $400 and $1,800. A simple ridge cap replacement or small shingle patch sits at the lower end. Replacing a full ridge or hip line across a larger Orlando home lands in the middle to upper range. A full roof replacement, which is usually what’s needed when the Barrette shingles themselves have reached end of life, runs $8,000 to $20,000 for most Orlando homes.
What drives the difference: how many linear feet of ridge or hip need work, the roof pitch (steeper means slower, safer work), whether the underlayment is damaged, and whether we’re matching an existing color or replacing a whole section. Every written quote includes parts, labor, disposal, and a plainly stated workmanship warranty. You get the price before any tool comes off the truck, and that price doesn’t change unless we find damage that requires your sign-off to address.
DIY or Call Us?
Roofing work carries real risk. Orlando roofs get slick after rain, pitch varies, and one wrong step sends a homeowner to the hospital. We don’t recommend DIY roof repairs beyond one thing: checking from the ground with binoculars after a storm, and clearing obvious debris from gutters while standing on a stable ladder with someone holding it. If you can see a ridge cap out of place or a shingle flapping, that’s our job, not a weekend project.
Some owners try to nurse a leak along with caulk or tar, and it almost always makes the eventual repair more expensive. Water travels, and what looked like a small shingle issue has now soaked the underlayment across four feet of decking. If you’re unsure whether it’s safe to wait, call us at (850) 920-7745 and describe what you see. We’ll give you a straight answer on the phone, even if the answer is “send us a photo, we’ll tell you if it can wait.”
FAQs
Barrette shingles in the Orlando market typically last 15 to 20 years, though Florida’s intense UV exposure and storm cycles often push that toward the lower end. Ridge caps and hip shingles tend to fail a few years before the shingle field, which means a roof can still have life left in it but need cap replacement sooner. Call (850) 920-7745 and we’ll help you figure out whether you’re looking at a repair or a replacement.
Most Barrette roofing problems are repairable if they’re caught before water damage spreads to the decking. A cracked ridge cap, a few lifted shingles, or failed seal strips are all standard repair jobs. What kills repair as an option is when the shingles have lost so much granule coverage that the mat is exposed, or when the underlayment has rotted, because at that point you’re patching a failing system. Call us for an honest assessment and a written price either way.
A typical ridge cap or shingle repair takes half a day to a full day once we’re on site, depending on roof pitch and how much of the line needs work. Most Orlando repairs are completed in a single visit. Larger ridge replacement jobs can stretch to two days if the weather doesn’t cooperate.
We stock common Barrette-compatible ridge caps, hip shingles, and seal strips on our service trucks, along with color-match swatches for the most common Orlando roof tones. When a specific color or profile isn’t on hand, we source it from our Orlando suppliers before the job is scheduled, not after we arrive. Call (850) 920-7745 with your roof’s color and approximate age, and we’ll tell you what we can match and when.
If you’re seeing roof damage and want a straight answer, call Mason Remodeling Co Orlando at (850) 920-7745. We’ll schedule a free estimate so you know exactly what the fix costs, in writing, before anything is done. We also keep parts and preferred material lines across KraftMaid, Cambria, and Silestone for kitchen and bath work, so if the roof wasn’t the only thing on your list, we can help there too.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
