A Mason company - serving Orlando, FL
An open living room and dining area after a whole-home remodel

Cover Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Orlando
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled kitchen with a waterfall island and wood cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Cover Fence Installation: The Orlando Owner’s Guide

Cover fence installation in Orlando typically runs $3,500 to $9,000 installed, depending on the linear footage, material choice, and what’s already in the ground. We keep the most common Cover-compatible posts, rails, and pickets in stock, and most repairs or fresh runs can be scheduled within a week of your call. The way owners usually find us: a post has rotted at ground level, a gate has begun dragging against the pavers, or a windstorm snapped a rail end clean off where it meets the post.

Call (850) 920-7745

If you’re staring at a leaning section right now, the quickest way to an accurate number is a phone call to (850) 920-7745. We’ll ask what you’re seeing, what your fence line looks like, and whether the posts are set in concrete or dirt. Then we’ll put a written price in front of you before any work starts, no exceptions.

Which Cover Models This Applies To

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Most Orlando homeowners with aluminum or vinyl fencing have what the industry calls Cover-style sectional systems: pre-routed horizontal rails that slide into punched post channels, with pickets that lock or notch into place from above. The big compatibility gotcha is spacing. Cover rails are typically cut to fit a 6-foot or 8-foot bay, but post-to-post measurements on Florida installs drift by a half-inch or more once the ground shifts through a few wet/dry seasons. Measure inside edge to inside edge before you order anything.

OEM Cover parts are worth the extra few dollars when the system is newer and the color is a custom match. For older fences, we’ll often recommend a quality aftermarket extrusion that matches the profile but handles UV exposure better. Orlando sun is hard on powder coating, and aftermarket rails with a thicker coating tend to fade less over five years. We also stock parts for KraftMaid, Cambria, and Silestone, so if your fence isn’t the only thing wearing out, we can help you plan the bigger job.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Cover Fence Installation Is Failing

  • Post lean of 5 degrees or more. This is almost always rot at ground level on wood posts or a cracked concrete collar on aluminum. In sandy Orlando soil, we see this accelerate after a hurricane season with heavy rain and then a dry winter.
  • Rails pulling out of the post channel. The locking tab inside the post has fatigued, or the rail was cut too short on the original install. When the wind loads the fence, the rail walks itself out. We fix this by replacing the tab and sliding the rail back, not by screwing through the post face.
  • Gate latch that barely catches. The post the latch is mounted on has shifted, or the hinge side has settled. Shimming the hinges buys a month. The real fix is resetting the post or installing a heavier-gauge hinge rail.
  • Pickets rattling in the frame. The bottom rail has filled with debris or water, and the picket notches have worn loose. In vinyl this is cosmetic at first, but the movement will crack the bottom rail over time.
  • Discolored, chalky surface on the sun-facing side. The powder coat or PVC capstock is breaking down. It’s not a failure yet, but it tells you the material is near the end of its useful life. Plan for replacement within 2 to 3 years.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A built-in window seat in a bay window

A full Cover fence installation in Orlando runs $3,500 to $9,000. The low end covers roughly 100 linear feet of stock vinyl with posts set in concrete and a single gate. The high end covers longer runs, aluminum with a premium powder coat, multiple gates, and tear-out of an old fence with disposal. It’s honest work, but it’s not cheap work, and anyone quoting you $1,800 for a 150-foot run is either wildly underestimating or planning to set posts without concrete.

Every quote we write includes tear-out, post setting in concrete, rail and picket installation, gate hardware, and haul-away. The written price is the price. If we find rotted old posts that need extra digging, that’s covered in the quote before we start, and there’s no change order at the end. The work is covered by a written guarantee for 365 days from the completion date.

DIY or Call Us?

Setting a fence post looks simple until you’ve dug a 24-inch hole in Florida sugar sand that keeps collapsing, then squared a post while the concrete sets faster than expected in the heat. A one-post repair is within reach for a capable homeowner. A full run of Cover fence is a different animal: you need string lines, correct post spacing for the rail lengths, and enough material staged so you’re not making three trips to the supplier in one afternoon.

There’s no electrical or high-tension danger with fencing, so this is one job where DIY won’t hurt you if you stay patient. But you’ll earn the $3,500 to $9,000 on a full install by the time you’re done. And if you’d rather not spend two weekends doing it, call (850) 920-7745. We’ll bring a written quote and a layout sketch. Tell me what the problem is. We’ll figure out the rest from there.

FAQs

A dining nook with a built-in banquette

Getting started with Mason in Orlando

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Orlando team

A local crew that works across Orlando and the towns around it, to the same written standard as every Mason location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Orlando? Licensed & insured · Free in-home estimates response · free estimates
Call (850) 920-7745
Local Service Coverage

Request a Free Estimate in Orlando

Tell us what you need - Mason Remodeling Co Orlando responds fast. No obligation.

By reaching out through this form, you acknowledge our Privacy Policy and consent to receive communications by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch