Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The Orlando Owner’s Guide
Mighty Buildings home additions and ADUs in Orlando typically run $45,000 to $130,000 installed, depending on square footage, site prep, and the condition of your existing foundation or slab. Most owners don’t discover a problem until a wall panel starts separating at a seam, a roofline sags near the ridge, or a door that used to close clean suddenly sticks. We stock Mighty Buildings-compatible panel fasteners, sealants, and trim kits on our trucks, and Mason Remodeling Co Orlando handles both the replacement work and the full addition build.
Here’s the thing about Mighty Buildings construction in Orlando: the composite panels are excellent, but Florida’s humidity, afternoon storms, and shifting sandy soil work every joint hard. What starts as a hairline gap at a corner seam becomes a water intrusion point within a season. The panel itself rarely fails. The connection points and sealant lines are where we see ninety percent of problems. If you’re seeing daylight through a seam, flaking caulk, or paint bubbling along a panel edge, that’s the early warning sign. The fix is usually straightforward if you catch it before water gets behind the panel.
Which Mighty Buildings Models This Applies To
Mighty Buildings builds their residential line in a few distinct series: the Accessory Dwelling Unit (ADU) kits, the studio and one-bedroom home shells, and the larger multi-module home additions. The panel composition is a light-stone composite with a fiber-reinforced polymer exterior, and the panel thickness runs from 4 to 8 inches depending on the wall’s structural role. If you’re trying to identify what you have, look for the printed label on the interior side of any wall panel near a corner. That label carries the panel ID, the series code, and the manufacture date.
The compatibility gotcha most Orlando owners hit is this: Mighty Buildings changed their panel joint profile around 2021. Older modules use a simpler tongue-and-groove seam with a surface sealant. Newer panels use a stepped joint that includes a compression gasket. When we replace or reseal a seam, we match the joint profile first. You can use an aftermarket sealant on either profile, but the gasket-style joints need the correct gasket durometer or you’ll get uneven compression and a seam that opens again within a year. We carry both profile kits. We’re an independent service provider here in Orlando, not a Mighty Buildings affiliate, which means we can be direct about what holds up and what doesn’t in this climate.
Styles & brands we work with
Signs Your Mighty Buildings Home Additions & ADU Is Failing
- Panel seam separation at corners or rooflines. Florida’s heat cycling makes the polymer skin expand and contract at a different rate than the panel core. The seam was the weak point from day one, and once the original sealant loses adhesion, a visible gap opens. That’s moisture’s front door.
- Soft spots or bubbling paint along the lower third of a wall. This means water is already behind the panel face. In Orlando, wind-driven rain gets pushed into any seam gap and has nowhere to dry. By the time paint bubbles, you’ve had water sitting against the framing or core for weeks.
- Interior doors suddenly stick or fail to latch. Panel modules are bolted to the foundation. If the foundation settles unevenly, the module shifts and the door frames rack out of square. It’s rarely the door; it’s the settlement gradient under the slab.
- Musty smell in a corner with no visible leak. The panel core can hold moisture for months before anything shows on the surface. In Orlando humidity, a trapped moisture pocket turns into mold inside the wall cavity faster than most people believe.
- Cracking around window and door openings. The polymer skin concentrates stress at penetrations. If the original install didn’t include proper expansion allowance around openings, you’ll see hairline cracks that widen over the course of one storm season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a panel seam reseal and fastener replacement, Orlando pricing runs $450 to $1,800 per affected seam, depending on linear footage and access. A full wall-panel replacement, including matching the Mighty Buildings profile and refinishing the exterior surface, runs $3,000 to $8,000 per panel. At the project scale, a complete Mighty Buildings home addition or ADU build runs $45,000 to $130,000, and a full ADU construction with site work starts at $90,000 to $220,000. Those are the real ranges we quote in Orlando.
What drives the price variance: whether the affected panels are load-bearing, whether we need to match a specific Mighty Buildings gasket profile, and how much exterior refinishing is required to blend the repair into the existing wall. Every quote we write includes labor, materials, and the specific Mighty Buildings-compatible parts we’ll use, itemized. You get a written price before any work starts. If we tell you a seam is $900, that’s what the invoice says at the end. The repair work carries our 365-Day Done Right Promise: if it’s not right within a year of completion, we fix it at no cost to you.
DIY or Call Us?
You can safely do two things yourself: mark the extent of any visible seam gap with painter’s tape, and take photos in morning light so we can see the full picture. Don’t climb onto a module roof to inspect a ridgeline. Mighty Buildings roof panels have a smooth polymer finish that gets slick after any rain, and the roof edge doesn’t give you much to hold onto. The panels also carry significant tension at structural connection points. If a fastener has failed, adjacent fasteners are doing double duty, and loosening the wrong one can shift a panel in a way you don’t want. Tell me what the problem is. We’ll figure out the rest from there. Call (850) 920-7745 and we’ll walk you through what we think you’re dealing with, then send someone out when it makes sense. The estimate is free.
FAQs
Panel cores are rated for decades, but the sealant lines between panels realistically last 8 to 12 years in Orlando before UV exposure and humidity cycling start breaking adhesion. Plan on a reseal around year ten, sooner if the module faces full western sun.
Yes, when the panel core is dry and intact we can grind out the old sealant, inspect the joint profile, install a correct-durometer gasket if the profile calls for it, and reseal the seam. Replacement is only necessary when water has compromised the core or the polymer skin has delaminated beyond a patchable area. Call (850) 920-7745 and we’ll give you an honest read.
A single seam reseal is a one-day job for a two-person crew. A full wall-panel replacement takes two to three days, including exterior refinishing and a cure period for the sealant. We won’t rush the cure; cutting it short is how the next failure gets its start.
We stock both Mighty Buildings joint profile kits, panel fasteners, and climate-appropriate sealants in our Orlando vehicles. If your module needs a gasket we carry, it goes on the truck the morning of the job. If it’s a specialty panel that has to be ordered, we tell you the lead time in writing before you approve anything. Call (850) 920-7745 for a free estimate.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
