Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Bathroom Remodeling: The Orlando Owner’s Guide
If you have an Ameristar bathroom and something’s failed, here’s what you need to know right now: we stock Ameristar-compatible replacement parts in Orlando and install them for a total job cost that typically runs $9,000 to $28,000 depending on scope. Most single-part failures like a cracked vanity top, a failing shower valve, or delaminating cabinet doors run far lower than a full gut remodel, often in the $800 to $3,000 range for the part and labor to swap it. You’ll usually notice the problem the same way every homeowner does: a cabinet door that won’t stay shut, water that won’t fully turn off, or grout that’s crumbling along the shower pan no matter how many times you re-caulk it.
A quick note on who we are: Mason Remodeling Co Orlando is an independent service provider. We’re not affiliated with Ameristar, but we’ve worked on enough Ameristar bathrooms across Orlando to know exactly how their components age in Florida humidity and what it takes to match them correctly. If you’re staring at a failed part and want a straight answer, call (850) 920-7745 and tell me what the problem is. We’ll figure out the rest from there.
Which Ameristar Models This Applies To
Ameristar bathroom products fall into three rough categories: vanity cabinetry and tops, shower surrounds and pans, and fixture sets (valves, trim, and drains). The gotcha most Orlando homeowners hit is assuming the part is universal. It isn’t. Ameristar used different mounting hole spreads on faucets across their production years, and their shower pans were made in 32-inch, 34-inch, and 36-inch widths that look identical from a photo but won’t swap cleanly.
To identify what you have, pull the bottom drawer on the vanity and look for a printed label on the inside of the cabinet box. It’ll have a model code that starts with “AM” followed by between four and six digits. For shower components, check behind the escutcheon plate (the round trim plate where the handle meets the wall) for an engraved part number. If you can’t find a label, measure the exact opening and send us a photo. We’ll match it before we ever schedule the truck to come out.
On the OEM-versus-aftermarket question: for Ameristar-specific hardware like hinge brackets and drawer slides with odd spacing, go OEM or a direct equivalent like Blum. For faucets, valves, and shower trim, quality aftermarket pieces from Moen and Delta often solve the same problem at a better price, and they’re easier to source quickly in Orlando. We’ll tell you which route makes sense for your specific failure instead of just selling you the most expensive option.
Styles & brands we work with
Signs Your Ameristar Bathroom Remodeling Is Failing
- Cabinet doors sag or won’t close square. The hinge screws have stripped out of the particleboard, or the hinge itself has bent from the weight of a solid wood door. This is repairable without replacing the whole vanity.
- Water runs slowly or not at all from the shower head. The cartridge inside the valve has mineral buildup from Orlando’s hard water. Ameristar valves from the early 2010s are particularly prone to this because the cartridges weren’t serviceable without special tools.
- Grout keeps cracking along the pan-to-wall seam. The shower pan is flexing. In Florida slab homes, that’s usually a sign the subfloor support under the pan has shifted or the pan wasn’t set on a proper mortar bed.
- Vanity top has a long hairline crack near the sink rim. This is a thermal stress crack from hot water hitting cold cultured marble. Once it reaches the bowl, water wicks into the cabinet below and you’ll smell musty wood inside the vanity.
- Drawer fronts have visible swelling or peeling along the bottom edge. Moisture has wicked into the MDF core. At that point the drawer front is done, and patching it just buys you a few months before the lamination separates completely.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Ameristar bathroom remodel in Orlando, expect $9,000 to $28,000 depending on whether you’re preserving the footprint or moving plumbing. A standard tub-to-shower conversion lands around $3,500 to $10,000. Replacing a failed vanity runs $800 to $3,000 including the cabinet and installation. If it’s a single component like a shower valve or a drawer slide set, you’re typically looking at a few hundred dollars for parts plus our service call.
Every price we give you is a written price, delivered before any work starts. That’s not a promo, it’s just how we operate. The number includes the part, the labor, the haul-away of the old piece, and a written guarantee covering the work for 365 days from the completion date. If something we installed fails in that window, we come back and fix it at no charge. No dispute process, no fine print gymnastics.
DIY or Call Us?
You can safely check a few things yourself: look for the model label, note whether the problem is cosmetic or functional, and take clear photos of the failed part. That saves time when you call. What you shouldn’t DIY is anything involving shower valves behind the wall, drain lines under the pan, or electrical near a vanity. If you open a wall and find mold, you’ll want a professional who can assess the extent before you reseal it and trap moisture in the framing.
We’ve seen too many Orlando homeowners spend a weekend and a few hundred dollars on a “simple” fix, only to call us Tuesday morning with water running through a ceiling. If you’re not sure, call (850) 920-7745. We’ll walk through what you’re seeing and tell you honestly whether it’s a parts-only visit or needs real work. Estimates are free, and a real person answers the phone every time.
Key Takeaways
- Ameristar parts are model-specific; check for the “AM” label before buying anything.
- Orlando hard water shortens valve cartridge life; most Ameristar failures we see are water-related.
- Replacement cost for a failed part is usually a few hundred to $3,000 installed; full remodels run $9,000 to $28,000.
- We stock common Ameristar-compatible hardware on our trucks and can order OEM parts same-week.
- Every job gets a written price before work starts and a 365-day written guarantee after it’s done.
FAQs
Vanity cabinets typically last 10 to 15 years in Florida humidity before doors or drawer fronts show wear, while shower valves and cartridges usually need replacement between 8 and 12 years due to hard water mineral buildup. If your bathroom has proper ventilation and the original install was done correctly, you’ll land on the longer end of those ranges. Call (850) 920-7745 if you want us to assess what you’ve got.
Yes, in many cases. Hinges, drawer slides, valve cartridges, and shower trim can often be repaired or individually replaced without touching the surrounding cabinetry or tile. The deciding factor is whether the base material underneath has already been compromised; if water has damaged the core, replacement is the honest answer rather than a patch that fails in six months.
Most single-part replacements like a vanity top, faucet set, or shower valve take half a day to a full day on site. If we’re replacing a shower pan or re-tiling around a tub, expect two to three days. We’ll tell you the schedule before you approve the written price, and the crew shows up when we say they will.
We keep common Ameristar-compatible hardware on our trucks: hinge sets, drawer slides, valve cartridges, and standard shower trim. For model-specific pieces, we order OEM parts directly and they typically arrive in 3 to 5 business days in Orlando. You never have to source a part yourself; we handle procurement as part of the job. For an exact quote on your specific part, call (850) 920-7745.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
