Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Orlando Owner’s Guide
If you have an Ameristar kitchen and a part has failed or is failing, we can match the right component and install it for a total that typically lands between $14,000 and $45,000 in Orlando, depending on scope. That range covers everything from replacing a section of cabinetry to a full Ameristar-compatible kitchen overhaul with countertops, backsplash, and island work. Most Orlando homeowners discover the problem the same way: a drawer front comes loose, a cabinet door stops closing square, or a countertop seam opens up and starts catching crumbs and water.
We’re an independent Orlando remodeling company. We are not affiliated with Ameristar, but we work with Ameristar-compatible cabinetry and components regularly, and we stock common replacement hardware on the truck so a single visit often solves the problem. If you’re not sure what part you need, call (850) 920-7745 and describe what you’re seeing. We’ll figure out the rest from there.
Which Ameristar Models This Applies To
Ameristar kitchen cabinetry generally falls into two lines: framed and frameless construction. Framed cabinets have a visible face frame around the front edge of the box, while frameless cabinets (sometimes called full-access or European-style) rely on thicker panel construction and hidden hardware. The part you need depends on which line you have. The simplest way to identify your cabinet is to look inside the sink base or a corner cabinet for a manufacturer label, usually a white or silver sticker with a model number and finish code.
The real compatibility gotcha with Ameristar in Orlando is hinge bore spacing. Ameristar frameless models typically use 35mm cup hinges with a 9.5mm depth bore, but some older framed lines used a 26mm cup. If you buy the wrong hinge, the door won’t seat properly and you’ll fight it for the life of the cabinet. We verify bore spacing and overlay before ordering anything. In most cases, we recommend OEM Ameristar hardware when it’s available, but for drawer glides and soft-close mechanisms, quality aftermarket equivalents from Blum or Salice perform as well or better in Florida humidity, and they’re often in stock locally when OEM parts are backordered.
Styles & brands we work with
Signs Your Ameristar Kitchen Remodeling Is Failing
- Cabinet doors that no longer close flush or drift open. This usually means the hinge springs have worn out or the mounting screws have stripped from repeated adjustment. In Orlando’s humidity, wood around hinge plates swells and contracts, which accelerates the problem.
- A drawer that sticks, drops, or closes too fast. The glide track is either bent, gummed with debris, or the soft-close mechanism has broken internally. If one drawer is affected, the others are usually not far behind.
- A countertop seam that has widened or changed color. Florida’s heat and humidity cycle causes laminate and solid surface materials to expand and contract. Once a seam opens beyond a hairline, moisture gets in and the substrate starts to swell.
- Loose or sagging cabinet boxes pulling away from the wall. This is a mounting failure, not a cosmetic one. In older Orlando homes, drywall anchors or screws into hollow wallboard fail over time, especially under the weight of heavy dishes.
- Soft-close dampers that slam or do nothing at all. The small hydraulic cylinder inside the hinge or glide has lost its fluid. It’s a cheap part, but replacing it incorrectly can crack the cabinet door.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Ameristar-compatible kitchen work in Orlando runs $14,000 to $45,000 for a full remodel, with smaller scopes falling lower. If you only need a cabinet hardware refresh or a countertop replacement, expect $2,000 to $6,500 for countertops and $4,000 to $13,000 for cabinet installation. The range depends on how many cabinets are involved, whether you’re matching an existing Ameristar finish or changing it, and whether we’re repairing the underlying structure or just swapping parts.
Every quote we give is a written price before any work starts. That covers the parts, labor, cleanup, and disposal. No change orders unless you ask for something different mid-project. The workmanship is covered by our 365-Day Done Right Promise: if something’s not right within a year of completion, we come back and make it right at no cost to you.
DIY or Call Us?
There are a few things a homeowner can safely check: whether hinge screws are loose, whether a drawer glide is visibly bent, or whether a soft-close mechanism is cracked. Tightening a screw is fine. Beyond that, kitchen cabinetry work gets unforgiving fast. Mismatched bore patterns will ruin a door, and forcing a frameless cabinet apart to replace a glide can split the panel. Countertop work, especially around seams and sink cutouts, involves adhesives and clamping pressure that are easy to get wrong and expensive to fix.
If you’re comfortable with a screwdriver and the part is a simple hinge swap, go ahead. If you’re not sure what you’re looking at, call us. We’ll walk through it with you on the phone, and if it needs a pro, we’ll send someone who knows exactly what to bring. The number is (850) 920-7745. Tell me what the problem is. We’ll figure out the rest from there.
FAQs
Ameristar cabinets in Orlando typically last 15 to 25 years, but hardware like hinges, drawer glides, and soft-close dampers usually fail well before the cabinet boxes themselves. Florida’s humidity shortens hardware lifespan compared to drier climates, especially in kitchens without good ventilation. If your cabinets are structurally sound, replacing the hardware is almost always cheaper than replacing the cabinets. Call (850) 920-7745 and we’ll tell you honestly which one you need.
Some parts can be repaired, but most hinges, glides, and dampers are sealed units that get replaced, not rebuilt. A stripped hinge plate can sometimes be repaired with a larger screw or a threaded insert, but if the wood around it is swollen or split, the cabinet door needs a new mounting point. We’ll tell you if a repair is worth it or if you’re throwing money at a part that’s already done.
A hardware-only replacement usually takes one visit, often the same day. A countertop replacement takes one to two days. A full kitchen remodel in Orlando typically runs three to six weeks depending on demolition, plumbing, electrical, and material lead times. We give you a written timeline with the written price, and we stick to it.
We stock common Ameristar-compatible hinge sizes, drawer glides, soft-close dampers, and mounting hardware on our trucks. Specialty parts or finish-matched components may need to be ordered, but we can almost always tell you the exact part number and lead time before you commit. If you’re not sure what you need, call (850) 920-7745 and we’ll help you identify it.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
