Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Kitchen Remodeling: The Orlando Owner’s Guide
If you have Belgard hardscaping products tied into your Orlando kitchen design, whether that’s a Belgard paver accent wall behind the range, a Belgard outdoor kitchen connected to the main kitchen, or Belgard pavers that step down from the kitchen into the lanai, a full Belgard kitchen remodeling project in Orlando typically runs $14,000 to $45,000 installed. That range covers tear-out, structural fixes, cabinetry, counters, and Belgard-integrated hardscape work. Most homeowners call us after noticing cracked pavers, uneven surfaces where the indoor kitchen meets the outdoor Belgard work, or water pooling at the transition point.
What usually happened: the original installer used the wrong Belgard base material under the transition, or Florida’s wet-dry cycle finally separated the indoor slab from the paver system. We see it every month across Orlando, from Winter Park to Dr. Phillips.
Which Belgard Models This Applies To
Mason Remodeling Co Orlando works with the full Belgard pavers and wall system lines commonly used in Orlando kitchen designs: the Belgard Catalina, Mega-Arbel, and Urbana paver series for floors and transition zones, plus the Belgand (Belgard) Dublin and Lafitt wall blocks for raised bar counters and outdoor kitchen surrounds. The compatibility gotcha most owners miss: Belgard Catalina pavers are 60mm thick, while Mega-Arbel runs 80mm. If your kitchen transition was built with 60mm pavers butted against a 3/4-inch indoor floor, you’ll get a lip that catches chairs and toes. That lip is usually the first sign something wasn’t matched correctly.
For OEM Belgard vs aftermarket: Belgard pavers are concrete units, not proprietary hardware like an appliance part. That means a quality aftermarket paver from a local Orlando supplier can often match color and dimension, but Belgard’s color blends like Rio, Sierra, and San Diego are factory-formulated. If you want an exact match on a 7-year-old Belgard floor, we source OEM through Belgard’s Florida distribution network. If you’re replacing a full run and color match matters less, an aftermarket equivalent can save 15 to 20 percent. We’ll show you both options side by side, with samples, before you decide.
Styles & brands we work with
Signs Your Belgard Kitchen Remodeling Is Failing
- Cracked or chipped pavers at the kitchen-to-outdoor transition. This happens when the base under the pavers wasn’t compacted to spec, or tree roots have pushed up from below. The crack itself is cosmetic; the movement underneath is a bigger problem.
- Water pooling against the kitchen wall or door sill after a rain. Belgard paver systems need a 1 to 2 percent slope away from the structure. Flat or reversed slope sends water toward your kitchen, and in Orlando’s summer downpours that means damp drywall and warped door frames fast.
- A raised lip or sunken edge where the indoor floor meets the Belgard work. That’s settlement. The pavers dropped, the slab didn’t, and now there’s a trip hazard with a coffee cup in hand.
- Efflorescence that keeps coming back even after cleaning. The white chalky residue is minerals wicking up through the paver. Constant moisture below the kitchen transition means your base drainage isn’t functioning. Cleaning it is a band-aid; fixing the drainage is the cure.
- Loose or wobbling wall blocks around a raised counter or bar area. Belgard wall systems rely on interlocking pins and adhesive. Once the adhesive bond breaks in Florida’s humidity and UV, blocks shift. A wobbly bar top above a kitchen prep zone is a safety issue, not a style issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Belgard-integrated kitchen remodel in Orlando lands between $14,000 and $45,000, and the spread comes down to scope. A kitchen refresh that includes new counters, backsplash, and repairing a small Belgard transition starts around $14,000. A complete gut renovation with cabinetry, layout changes, new flooring, and a full Belgard outdoor kitchen tie-in runs up to $45,000. Replacement of just the Belgard paver transition zone, without touching the interior kitchen, typically falls between $3,500 and $11,000, matching our paver patio labor rates in this market.
Every price we quote is written, line-itemed, and delivered before any work starts. You’ll see exactly what the pavers cost, what the base material costs, and what our labor costs. When the job is done, the whole project falls under our 365-Day Done Right Promise: if something isn’t right within a year, we come back and make it right at no charge.
DIY or Call Us?
You can safely check the slope of your Belgard transition with a 4-foot level and a quarter, and you can inspect for cracked pavers and loose wall blocks without any risk. What you shouldn’t do is lift and re-set pavers yourself, especially in the transition zone next to your kitchen. The base compaction underneath determines whether the problem comes back, and if you’re off by half an inch on the slope, water still finds your door sill. Also, Florida’s sandy soil means the wrong base material fails within two seasons. We haul out the old base, re-compact with the right gradation, and re-set the pavers so the transition is flush and dry. That’s the part worth hiring out.
If you’re not sure whether what you’re seeing is a real problem or just wear, call (850) 920-7745. Tell me what the problem is. We’ll figure out the rest from there.
FAQs
Belgard pavers themselves routinely last 25 to 30 years in Orlando, but the transition base underneath typically fails in 7 to 12 years if it wasn’t built with proper drainage and compaction. The pavers aren’t usually the problem; the preparation is. Call (850) 920-7745 and we’ll inspect your transition and tell you what’s actually failing.
For isolated cracks on a single paver, yes, we can remove and replace just that unit. For multiple cracks or recurring cracks across a wider area, the base underneath has failed and a patch won’t hold. An inspection tells us which camp you’re in, and the inspection is free.
A transition-zone repair takes one to two days. A full kitchen remodel with Belgard integration runs three to six weeks depending on cabinet lead times and whether we’re pulling permits. We’ll give you a clear timeline in the written estimate before you commit.
For common Orlando Belgard colors and sizes like Catalina and Mega-Arbel in Rio and Sierra blends, we can typically source materials within three to five business days through Belgard’s Florida distributors. Specialty colors or larger quantities may take longer, and we’ll tell you the lead time before we schedule anything. We also work with KraftMaid, Cambria, and Silestone for interior kitchen finishes, so the whole project moves through one source.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
