Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Orlando Homeowners Choose Delta Construction
Delta faucets and shower trims show up in more Orlando kitchen and bath remodels than almost any other brand, and when one drips, stiffens, or leaks behind the wall, you need a crew that knows the valve bodies and finishes well enough to fix it right the first visit. Mason Remodeling Co Orlando provides Orlando Delta service for faucet, shower trim, and valve repairs across the area, from cartridge swaps on Trinsic and Leland faucets to full MultiChoice rough-in valve replacements during tub-to-shower conversions. We’re a full-service remodeler, so Delta work usually happens as part of a kitchen or bath project, not as a standalone faucet call. As an independent Delta service provider, we’re not factory-certified or tied to manufacturer warranty rules. That means we recommend the repair or replacement that actually makes sense for your home, your budget, and your timeline, and we put the price in writing before any work starts. Call (850) 920-7745 to talk through what you’re seeing.
Why Trust Mason Remodeling Co Orlando for Your Delta Construction?
Our crew works with Delta’s most common valve bodies and finishes every week, not once a season. A dripping Trinsic faucet is a cartridge problem almost every time, and we swap those in under an hour in most kitchens. A stiff Leland handle usually means mineral buildup inside the valve, not a bad handle set. A Vero or Ara bath faucet with a loose, corroded handle tells us moisture has been sitting where it shouldn’t. Knowing these patterns means we show up with the right parts on the truck and don’t guess at your expense.
Isaac Pruett, our owner, learned the trade at Los Angeles Trade-Technical College and has spent decades putting that training to work on real projects. He and the crew have been serving Orlando homeowners for years, from gut-renovating kitchens in College Park bungalows near Edgewater Drive to full additions across the metro area, including Delta service in Clermont. Isaac still measures twice before he cuts once, and if a Delta repair can be done with a $60 cartridge instead of a $600 trim kit, that’s what he’ll tell you. Every crew member who walks through your door has been background-checked and identity-verified under The Threshold Standard, arrives in a clean marked uniform, and shows a photo ID badge. You get the name and photo of your technician before the visit. And every project carries a written guarantee with its coverage terms stated plainly, including what’s covered, what’s excluded, and for how long. A written price comes before any work starts, every time, no exceptions.
Styles & brands we work with
Common Delta Construction Problems We Fix in Orlando
- Leaking or stiff MultiChoice universal valves in shower systems. Delta’s MultiChoice rough-in valve sits behind the wall and controls temperature and volume for nearly every Delta shower trim. Orlando’s hard water leaves mineral scale on the valve internals, which shows up as a handle that won’t turn smoothly or a showerhead that keeps dripping after you shut it off. In older Orlando concrete block homes near downtown, we also see corrosion from years of humid air moving through unsealed wall cavities, which eats at the valve body itself. The fix is usually a new Delta RP46074 cartridge, not a whole new rough-in.
- Cartridge failure causing dripping from Trinsic or Leland faucets. Trinsic and Leland are two of Delta’s most installed kitchen and bath lines, and both use the same ceramic disc cartridge platform that eventually wears out. A drip with the handle off, water weeping around the base of the spout, or a handle that takes more force to shut off are all classic cartridge symptoms. We pull the old cartridge, inspect the valve body for scoring, and install a genuine Delta replacement with fresh silicone grease on the seals. Most Orlando kitchens are back to a dry faucet in one visit.
- Mineral buildup on Touch2O technology sensors or spray heads. Delta’s Touch2O faucets use capacitive touch sensors in the spout and handle. Orlando’s water has enough dissolved mineral content that these sensors can lose sensitivity over time, meaning you tap the spout and nothing happens, or the faucet turns off mid-use. Hard-water scale on the aerator and spray head also causes weak or uneven flow. We clean the sensor contacts with a descaling treatment, clear the aerator, and if the sensor module itself has failed, we replace it with an OEM Delta part rather than leaving you with a dead touch feature.
- Loose or corroded handle sets on Vero and Ara bath faucets. Vero and Ara are Delta’s more geometric, modern bath lines, and their handle sets rely on a small set screw under a hot/cold index cap. In a humid Orlando bathroom, that set screw corrodes, the handle loosens, and then the internal cartridge takes all the stress, which shortens its life. We see this most in larger master baths where the shower steam has nowhere to go. We replace the handle kit, address the cartridge if it’s already worn, and in some cases add a bead of silicone under the escutcheon plate to keep moisture out of the valve body.
- Shower trim that doesn’t match the rough-in valve behind the wall. This is a big one in Orlando, where many post-1980s suburban homes were built fast and cheap, and what’s behind the tile isn’t always what the original trim says it is. Homeowners buy a new Delta Trinsic shower trim kit, the plumber opens the wall, and the old rough-in isn’t a Delta at all, or it’s a different Delta generation. We handle this by installing a new Delta MultiChoice universal rough-in valve, setting the depth and orientation correctly for the new trim, and testing under full pressure before the wall closes. That way the new trim actually works, and you’re not tearing out tile a month later.
Delta Parts & Our Repair-vs-Replace Approach
For every Delta repair, we start with the question: what actually failed? Most Delta faucet and shower problems come down to a $50 to $80 cartridge, a worn seal, or a corroded handle set, not a bad faucet. We use genuine Delta cartridges, seals, and trim kits for repairs. These OEM parts carry Delta’s own materials warranty, and more importantly, they’re machined to Delta’s exact tolerances. A cheap aftermarket cartridge can fit sloppily and start dripping again in three months. If a homeowner asks about aftermarket options to save money, we’ll have an honest conversation. We only consider aftermarket parts that meet Delta’s exact specifications, and for anything inside the wall or under pressure, we recommend genuine Delta. The exception is when the valve body itself is cracked or badly corroded. In that case, no cartridge in the world will fix it, and we recommend replacing the entire rough-in valve. That’s a bigger job because it means opening the wall, but it’s the difference between a shower that works for fifteen years and one that leaks back through your drywall in six months. Call (850) 920-7745 if you want a straight answer on whether yours is worth fixing or replacing.
Our Delta Service Process – Step by Step
1. Diagnosis. We start by listening to what you’re seeing, then we test the faucet or shower trim under running water. We check water pressure at the supply lines, pull the handle to inspect the cartridge, and feel for roughness in the valve body. If it’s a leak behind the wall, we may use a moisture meter or open a small access panel before we recommend anything. The diagnosis is free, and you get the written price before any repair starts.
2. Repair or install. For a cartridge replacement or trim swap, we shut off the water at your supply stops or at the main, pull the old parts, clean the valve body, and install the new Delta components. For a tub-to-shower conversion or walk-in shower install that involves a new MultiChoice rough-in valve, we frame, set the valve at the correct depth for the finished wall, and pressure-test it before the wall closes. Our crew was finishing a full bathroom remodel in Windermere, near Delta Construction in Orlovista, FL, where the customer had purchased a new Delta Trinsic shower trim, but the existing MultiChoice rough-in valve was leaking behind the wall. We pulled the old valve, installed a new Delta MultiChoice universal rough, set the depth and orientation correctly, and fired up the water to a steady, drip-free shower. The glass enclosure and tile went in right after, no callbacks.
3. Test and walk-through. Once the water is back on, we run the faucet or shower at full hot, full cold, and everything in between. We check for drips at the spout, leaks at the supply connections, and proper handle feel. If you have a Touch2O faucet, we test the sensor in both manual and touch modes. Then we walk you through what was done, what parts we used, and what to watch for.
4. Written guarantee and follow-up. Every Delta repair and install gets a written guarantee with the coverage terms in plain language. The 365-Day Done Right Promise applies across our General Contractor, bathroom remodeling, and whole-home remodel work: if the work isn’t right within a year of completion, we make it right at no cost to you. If a repair or installation fails, you get a free return visit, no charge, no dispute process, no conditions.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Orlando
We service and install across Delta’s most common current and recent lines: Trinsic, Leland, Vero, and Ara. That covers kitchen faucets, bath faucets, shower trims, tub spouts, and the MultiChoice rough-in valves behind the wall. We stock genuine Delta cartridges, seals, trim kits, and handle sets on our service vehicles, including common finishes like chrome, stainless, matte black, and Venetian Bronze. For less common finishes like Champagne Bronze, we order directly from Delta and typically have the part within a few business days. We also work with Touch2O and Touch20 faucets, including sensor module replacement. If you’re mid-remodel and need a walk-in shower installed, a tub-to-shower conversion, or a tub/shower valve installed behind new tile, we handle the full scope, from valve rough-in to finished trim.
We Also Service These Brands
Delta is one of the brands we see most often, but we’re not a single-brand shop. Our remodels also include cabinetry from KraftMaid, surfaces from Cambria and Silestone, and fixtures from Kohler. If your project spans multiple brands, one crew handles the whole thing, and one written price covers it all.
FAQs – Delta Construction Service in Orlando
A drip with the handle off almost always means the ceramic disc cartridge inside the faucet body has worn or cracked, and it’s letting water past the seal. Touch2O faucets use the same cartridge design as Delta’s manual faucets, so the fix is a cartridge replacement, usually $80 to $200 installed depending on the model and finish. Occasionally mineral buildup inside the valve body is the culprit, which we clean out before installing the new cartridge. Call (850) 920-7745 and we’ll tell you the exact price for your model before any work starts.
In most cases, yes. If you have an existing Delta MultiChoice rough-in valve that’s in good condition and properly oriented, a new trim kit from Trinsic, Leland, Vero, or Ara will mount right onto it. We inspect the valve first, because if the cartridge seat is scored or the valve body is corroded, a new trim kit won’t fix a leak behind the wall. If the rough-in needs to be replaced, that’s a bigger job involving opening the wall, but it’s the right call when it’s necessary. We always show you what we found and give you a written price before we cut anything.
That’s usually a repair. The diverter gate inside the tub spout wears out or gets stuck from mineral buildup, and water keeps flowing to the showerhead instead of the tub. On most Delta tub spouts, we can replace the diverter mechanism or the entire spout for a fraction of what a new valve would cost. If the spout threads are corroded or the pipe stub is damaged, we’ll tell you, and then we’ll replace just what’s actually broken. Call (850) 920-7745 and describe what you’re seeing. We’ll give you a straight answer.
Champagne Bronze and other specialty finishes are part of Delta’s current catalog, and we order them directly from Delta so the sheen matches exactly across every component. We don’t mix finishes unless the homeowner specifically asks for it, because a Champagne Bronze handle next to a chrome escutcheon looks wrong every time. If only one piece of trim is damaged, we’ll order that piece in the matching finish and install it when it arrives. You get a written price and a parts timeline before anything is ordered.
A tub-to-shower conversion itself doesn’t void a Delta faucet warranty, because the faucet and trim are separate from the shower structure. What matters is whether the Delta valve and cartridge are installed correctly and whether any replacement parts are genuine Delta. Using non-OEM cartridges or trim can void the warranty on those components. We use genuine Delta parts for all repairs and installations, and we stand behind the work with our own written guarantee and a 365-Day Done Right Promise. Call (850) 920-7745 if you’re considering the conversion and want to talk through what it involves.
Delta-related work varies by scope. A cartridge replacement runs $80 to $200 installed. A full tub-to-shower conversion in Orlando typically runs $3,500 to $10,000. A walk-in shower installation runs $4,500 to $12,000. Here’s a breakdown:
| Service | Typical Orlando Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Backsplash Installation | $800 – $2,500 |
These are real ranges based on Orlando’s labor and material market, and the final number depends on the size of the space, the finish level, and whether we’re repairing or replacing the valve behind the wall. Call (850) 920-7745 for an exact quote. Estimates are free, and the price we give you is the price you pay.
Book Your Delta Service in Orlando, FL
If you have a Delta faucet dripping, a shower trim that won’t behave, or a remodel that needs new Delta fixtures and valves installed right, call us at (850) 920-7745. We’ll talk through what’s happening, give you a written price before any work starts, and send a crew member whose name and photo you already have. Isaac’s approach hasn’t changed since his first job: tell us what the problem is, and we’ll figure out the rest from there.
Written by Isaac Pruett, Owner at Mason Remodeling Co Orlando, serving Orlando since 2004.
