Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The Orlando Owner’s Guide
KraftMaid fence installation in Orlando typically runs $3,500 to $9,000, and we stock KraftMaid-compatible fence panels, posts, and hardware on our trucks for most common configurations. When a KraftMaid fence fails, it’s rarely the whole run that goes; it’s a post that’s rotted at the base from Orlando’s wet summers, a gate that’s sagged off its hinges, or a panel that’s warped after a hurricane season. We show up with the parts matched to your existing layout, give you a written price before any work starts, and have the install done without turning your yard into a construction site.
Which KraftMaid Models This Applies To
KraftMaid’s fence lines mostly fall into two families: their standard cedar privacy series and their vinyl and composite crossover lines that share hardware specs with their deck systems. The compatibility gotcha we see in Orlando: KraftMaid changed post-cap and rail bracket dimensions on their vinyl lines around 2018, so a panel bought from a big-box store today won’t always drop into posts from a 2015 install. You’ll find the model code stamped on the inside of the gate frame or on a sticker near the bottom rail, and we match by that code, not by eye. For cedar, we order OEM-grade Western Red Cedar when the existing run is clear-finished, and pressure-treated pine when the original was stained or painted. Aftermarket composite panels from suppliers like Barrette or US Fence hold up fine here, but we’ll tell you plainly if your KraftMaid rails are still sound and a quality aftermarket panel saves you money.
Styles & brands we work with
Signs Your KraftMaid Fence Installation Is Failing
- Posts wobbling at ground level. In Orlando, this is almost always rot at the soil line where a post wasn’t wrapped or the concrete collar cracked. The fence can look fine up top while the post is losing its footing.
- Gate dragging or sagging off the latch side. The hinge post has shifted, or the gate frame’s diagonal brace has pulled loose. KraftMaid gate frames use a specific corner bracket that cracks before the wood splits, so a sagging gate is often a $40 bracket fix, not a new gate.
- Panels bowing or cupping along the top rail. Florida humidity swells cedar and pine unless it was sealed on all six sides before install. We seal the rail and stile ends before hanging any panel, and it’s the reason our Orlando installs last years longer than a weekend DIY job.
- White or green film spreading at the base of posts and pickets. That’s mold and mildew working into the grain, accelerated by Orlando’s afternoon thunderstorms and poor drainage at the fence line. Once it’s in the grain, cleaning won’t fix it; the wood is spongy and needs replacement.
- Pickets splitting at the nail or screw line. KraftMaid panels are assembled with fasteners at set intervals, and when the wood dries and shrinks, those fastener lines become split points. A whole panel usually follows within a season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For KraftMaid fence installation in Orlando, a post replacement with concrete reset runs $350 to $750 per post depending on access, while a full panel and rail swap runs $75 to $150 per linear foot. A typical 50-foot run with two gates lands between $3,500 and $9,000 installed. What drives the range: whether your posts need digging and resetting or can be reused, whether the panel is cedar, pressure-treated, or composite, and how much demolition and haul-away the old fence requires. Every quote includes parts, labor, disposal, and a written line-item price delivered before we start. Our 365-Day Done Right Promise covers the install: if any post shifts, panel warps, or gate misaligns within a year of completion, we return and make it right at no cost.
DIY or Call Us?
Honest split: a homeowner can inspect a failing KraftMaid fence safely. Walk the line, press on each post to feel for movement, check the gate’s corner brackets, and look for rot at the soil line. What you shouldn’t do is pull a post and hand-set it in fresh concrete without checking the original footing depth, or hang a new panel on rails that have lost their structural bite. We get called to Orlando yards where a DIY repair worked for a wet season and then the whole section toppled in a storm. If the failure is at the soil line, involves a gate, or the fence is over four feet tall, call us at (850) 920-7745. You’ll get a straight answer and a price in writing before any dirt gets moved. As Isaac Pruett says around here, “Tell me what the problem is. We’ll figure out the rest from there.”
FAQs
A properly installed KraftMaid cedar fence lasts 15 to 20 years in Orlando with sealant reapplication every two to three years; pressure-treated pine runs 10 to 15; vinyl and composite can go 25 or more. The limiting factor here is moisture at the post base, not sun damage, so post wrapping and drainage matter more than panel material. Call (850) 920-7745 and we’ll assess your existing fence’s remaining life for free.
Yes, when the posts are sound and the failure is isolated to rails, pickets, or gate hardware, repair is the smarter money and we’ll say so. Posts with rot at the soil line or panels with widespread splitting usually mean replacement is cheaper than chasing repairs across a full run. Call (850) 920-7745 for an honest assessment, not a sales pitch.
A post or gate repair typically takes one to four hours on site; a full 50-foot panel replacement with gate reset takes a day or two depending on access and whether concrete work is involved. We schedule around Orlando’s afternoon rain patterns and keep the job site clean at the end of every day. Call (850) 920-7745 for a timeline specific to your fence.
We stock common KraftMaid-compatible post caps, brackets, gate hinges, and panel hardware on our trucks, and we order OEM or matched aftermarket panels with a three-to-five day lead time for most Orlando jobs. If your exact panel is discontinued, we’ll show you the closest match and put the difference in writing before you commit. Call (850) 920-7745 and tell us your model code; we’ll check stock while you’re on the line.
Mason Remodeling Co Orlando is an independent service provider and is not affiliated with KraftMaid. We also stock and install parts for Cambria, Silestone, and Kohler product lines.
Call (850) 920-7745 to schedule your free KraftMaid fence installation estimate in Orlando. You’ll speak to a live person, get a written price before any work starts, and know exactly who is coming to your door, by name and photo, before they arrive.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
