Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Orlando Owner’s Guide
Oldcastle kitchen remodeling in Orlando typically runs $14,000 to $45,000 installed, depending on cabinet count, countertop material, and whether you’re opening walls. We stock Oldcastle-compatible components and finish most full kitchen remodels in 4 to 8 weeks. Owners usually reach out after a hinge tears out of a cabinet face, a drawer slide locks up mid-pull, or a countertop seam separates near the sink where Orlando humidity works on it every day.
If you have an Oldcastle cabinet, countertop, or island that’s failing, the fix usually costs less than you think – and far less than replacing the whole kitchen. We’re an independent Orlando remodeling company, not affiliated with Oldcastle, but we’ve worked on enough of their product lines to know exactly what holds up and what doesn’t in central Florida’s climate.
Which Oldcastle Models This Applies To
Oldcastle’s kitchen lines vary by builder and year, and the hardware specs changed between production runs. The most common models we see in Orlando homes are the builder-grade cabinet series installed by production home builders in the 2000s and 2010s, plus a handful of custom-order lines with full-extension drawer slides and soft-close hinges retrofitted after purchase.
Here’s the compatibility gotcha most owners miss: Oldcastle cabinet boxes are often standard ½-inch plywood and accept universal hardware, but the door hinge bore pattern is sometimes 35mm rather than the typical 26mm. Measure the cup diameter before ordering replacements. Countertops run standard 2cm or 3cm thickness depending on whether the original install used a plywood subtop. If you’re not sure what you have, take a photo of the hinge stamp and send it to us before spending money – we’ll tell you what fits.
For OEM versus aftermarket: Oldcastle-branded replacement parts exist for some series, but aftermarket Blum or Salice components usually match or beat them at a lower price. We stock both, and we’ll give you the honest breakdown before you commit.
Styles & brands we work with
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Drawer slides grinding or sticking – The nylon rollers on older side-mount slides wear flat against the track, especially in kitchens where cooking grease settles into the mechanism. Once they start grinding, the metal’s already eating itself.
- Hinge screws pulling out of the door face – Particleboard doors (common on builder-grade Oldcastle lines) lose their grip over time, and Orlando’s humidity accelerates the swelling. Once the screw hole strips, the door sags permanently.
- Soft-close mechanism slamming or not catching – The damper inside Blum-style hinges fails after roughly 15,000 cycles. You’ll notice one door always slams while the rest close quietly.
- Countertop seam separating near the sink or dishwasher – Florida’s humidity plus constant hot-cold cycles from the dishwasher vent eventually breaks the adhesive bond. The seam opens slightly and starts collecting water, which travels under the stone.
- Island base pulling away from the floor or wobbling – Improperly shimmed islands shift as the slab settles, and Orlando’s expansive clay soil makes this worse in neighborhoods like Dr. Phillips and Winter Park. A wobbling island is usually a subfloor or leveling problem, not a cabinet problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what you can expect to pay in Orlando for Oldcastle-related kitchen work:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation (replacement): $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
Every price is a written, line-item quote before we start. No change orders unless you ask for something different. The 365-Day Done Right Promise covers the workmanship: if something we installed fails within a year of completion, we come back and fix it at no charge. That includes the hardware, the labor, and the trip.
DIY or Call Us?
There’s a small set of things worth doing yourself: tightening a hinge plate, adjusting a soft-close catch, cleaning a drawer track. These take minutes and a screwdriver.
Then there’s everything else. Replacing a stripped hinge on particleboard requires drilling out the old hole, filling it with a hardwood dowel or epoxy, re-drilling, and remounting the plate square. If the door frame is swollen from humidity, the new hinge will never sit right unless you address the moisture source first. And pulling a seam apart near a sink means you’re working around water supply lines – if you nick one, you’ve got a bigger problem than a cracked countertop. Call us at (850) 920-7745 and we’ll walk through what you’re seeing. Free estimate either way.
FAQs
Most Oldcastle builder-grade cabinets and hardware last 10 to 15 years in Orlando before hardware fails, though particleboard doors often show wear sooner in humid kitchens. Countertops can go 20+ years if seams stay sealed.
Most of the time, yes. Hinges, drawer slides, and soft-close mechanisms are replaceable, and stripped screw holes can be rebuilt. We only recommend replacement when the cabinet box itself is water-damaged or the door face has delaminated.
Most hardware repairs are done in a single visit, usually 1 to 3 hours. Countertop seam repair takes half a day because the adhesive needs time to cure. A full kitchen remodel runs 4 to 8 weeks depending on scope.
We stock common Blum and Salice hinge sizes, drawer slides, and soft-close catches on our trucks, plus we have access to OEM Oldcastle parts for specific series. If it’s not in the truck, we’ll get it ordered and scheduled before you pay anything.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
