Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Orlando Owner’s Guide
Most Orlando homeowners calling us about Tamko kitchen work aren’t starting from zero. They’re midway through a project, or living with a kitchen that’s half-finished, and something specific has gone wrong: an island that was framed but never surfaced, cabinets that arrived damaged, a countertop seam that opened up after the first Florida summer. A Tamko kitchen remodel in Orlando typically lands between $14,000 and $45,000 installed, depending on how much has to be corrected or completed. We stock common Tamko-compatible trim, hardware, and panel components on our trucks, and we can usually have the full job quoted within two business days of walking the space.
Symptoms vary. You might have a Tamko product that was installed by another crew and now the finish is failing. Or you bought the materials yourself and the installer backed out. Or the kitchen is fine but one section – a sink base, an island end panel – never quite got done. That’s where we come in.
Which Tamko Models This Applies To
Tamko doesn’t market kitchen products under a single unified model line the way a faucet company does, so we identify what you have by the label, the finish, and the dimensions, not by a model number on a box. Most Tamko kitchen material we see in Orlando falls into three categories: laminate and thermofoil cabinet fronts, solid-surface countertop and backsplash panels, and trim or edge profiles used to finish a run.
The compatibility gotcha we run into constantly: Tamko thermofoil doors from different production years share the same profile shape but carry slightly different color lots. The 2019 “linen” and the 2023 “linen” will read as a mismatch under warm light. If you’re replacing one door or one drawer front, we order a full run of sample chips and match against the installed cabinets, not the spec sheet. For aftermarket equivalents, we use a supplier in central Florida that cross-references Tamko’s pigment codes. OEM is safer for color-critical pieces; aftermarket makes sense for internal components – hinges, drawer glides, shelf clips – where color never shows.
Styles & brands we work with
Signs Your Tamko Kitchen Remodeling Is Failing
- Peeling or bubbling thermofoil on door and drawer faces. Florida humidity gets behind the film, especially near the dishwasher or above a boiling pot. Once it lifts along the edge, the panel rarely recovers without replacement.
- Seam separation on solid-surface countertops. You’ll see a dark hairline running perpendicular to the run. Orlando’s heat-cold cycles between AC and unventilated summers make Tamko solid surface expand enough to pull a weak seam open.
- Drawer boxes that bind or tilt forward. The glide brackets were mounted into particle board without reinforcement. Under daily weight, the screws wallow out and the drawer starts to sag.
- Cabinet doors out of alignment that won’t stay adjusted. The hinge cup has stripped or the face frame is soft from moisture. Adjustments stop holding after a week or two.
- Discoloration around the sink or faucet deck. Water has worked under the laminate layer or into the solid-surface substrate. What starts as a faint gray ring becomes a permanent stain and eventually a soft spot.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Orlando, plan on $14,000 to $45,000 for a full Tamko kitchen remodel done properly. That range covers everything from a smaller galley kitchen refresh up to a full gut with new Tamko cabinets, solid-surface counters, tile backsplash, and fixtures. A narrowed scope – replacing a failed run of cabinets or resurfacing a single counter section – runs lower: cabinet installation alone lands at $4,000 to $13,000, countertop replacement at $2,000 to $6,500.
What drives the spread: kitchen size, whether existing cabinet boxes can be saved, electrical or plumbing work hiding behind the failure, and whether the old install has to be demoed cleanly. We price parts and labor separately on every written quote, so you’ll see exactly what the Tamko materials cost and exactly what our crew charges to install them. The workmanship is covered by our 365-Day Done Right Promise: if anything we installed isn’t right within a year of completion, we make it right at no cost.
DIY or Call Us?
Some things you can check safely: whether a drawer slide has backed-out screws, whether a hinge plate is loose, whether a seam has opened enough to catch a fingernail. Tightening hardware and cleaning the gunk out of a glide is fair game. Replacing a thermofoil door, resurfacing a counter, or correcting a failed seam is not. The risk isn’t just cosmetic – a bad seam lets water into the cabinet structure, and by the time you see the stain downstairs, the substrate is gone.
Isaac Pruett has walked enough Orlando kitchens to know the difference between a finish problem and a structural one. The crew respects that this is your home, not a showroom floor. Call (850) 920-7745 and tell us what you’re seeing. We’ll let you know what it’s likely to cost before anyone schedules a visit.
FAQs
Laminate and thermofoil cabinet fronts typically last 15 to 20 years in Orlando’s climate; solid-surface tops can go 20 to 25 with proper seam sealing and UV care. The Florida failure point is almost always moisture – under the sink, around the dishwasher, anywhere steam and humidity collect day after day. Call (850) 920-7745 and we’ll tell you if what you’re seeing is age or an install problem.
Sometimes. Drawer glide issues, hinge adjustments, and minor laminate chips can be repaired on site. A lifted thermofoil face or an open countertop seam usually means replacing that section, because the substrate underneath is compromised. We’ll give you an honest answer either way, not whichever answer sells bigger work.
Most full Tamko kitchen remodels in Orlando run two to five weeks from demo to final walkthrough. Smaller corrections – a failed cabinet run or counter section – often wrap in under a week. You’ll get a written timeline with your written price before any work starts.
We keep common Tamko-compatible hardware on our trucks: hinges, drawer glides, shelf clips, and edge trim profiles. Color-matched panels and solid-surface stock are ordered per project. We also stock and install parts for KraftMaid, Cambria, and Silestone kitchens, so if your kitchen mixes brands, one crew can handle the whole repair.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
Ready to get your Tamko kitchen sorted? Call (850) 920-7745 for a free estimate. A live person answers, and you’ll get a written price before any work begins.
