Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Roofing: The Orlando Owner’s Guide
We carry and install Techo-Bloc-compatible roofing components throughout Orlando, with most replacement jobs running between $400 and $1,800 depending on the part and the scope of the failure. If you’re holding a cracked paver, a failed edge restraint, or a roof deck component that’s given out after years of Florida sun, we can usually match it and get it installed the same week. Most Orlando homeowners discover the problem the hard way: a paver shifts underfoot, water pools where it didn’t before, or the edge of the roof deck starts to look like it’s coming apart at the seam.
We’re an independent service provider, not a Techo-Bloc dealer. That means we tell you plainly when a genuine Techo-Bloc part is worth the cost, and when a quality equivalent from another manufacturer will do the same job for less.
Which Techo-Bloc Models This Applies To
Techo-Bloc makes a range of roofing and hardscape products, and the compatibility question is the first thing we sort out on any call. Their pavers, caps, and wall blocks come in multiple series lines with different thicknesses and dimensional tolerances. A Techo-Bloc paver from the Blu 60 line isn’t interchangeable with one from the Victorien line, even if they look close in a photo. The same goes for their edge restraints and coping units, which are sized to specific paver profiles.
The fastest way to identify what you have is to flip a loose unit over and look for the Techo-Bloc stamp, which includes the series name. If the stamp has worn off, we measure the unit with a caliper and check the joint spacing against known specs. That’s the difference between ordering the right part the first time and making you wait two weeks for a reorder. Techo-Bloc discontinued a few older series lines over the years, and in those cases we’ll source a compatible current production unit or recommend a full section replacement if matching isn’t possible without visible seams.
Styles & brands we work with
Signs Your Techo-Bloc Roofing Is Failing
- Shifting or rocking pavers. When the supporting base layer washes out or compacts unevenly, individual units start to move. In Orlando’s afternoon downpours, water gets under the pavers fast, and that movement is the first sign the base is failing, not the paver itself.
- Water pooling in low spots. Roof decks should slope toward drains or scuppers. If water sits for hours after a storm, the deck’s grading has shifted or the underlying membrane has degraded. Pooled water on a roof deck shortens the life of everything above it.
- Cracks running through multiple units in a line. A single cracked paver is usually impact damage. A crack that runs through three or four units in a straight line points to a structural problem underneath: a failed joint, a settling support, or thermal expansion the installation didn’t accommodate.
- Edge restraints pulling away. The perimeter of a paver roof deck is under constant stress from foot traffic and thermal cycling. When the edge restraint loosens, the whole field of pavers starts to drift toward the edge. This is a safety issue, not just a cosmetic one.
- Efflorescence or white chalky residue. This white mineral deposit looks worse than it is, but it signals water moving through the paver body. On a roof deck, that means the drainage layer below isn’t doing its job, and trapped moisture is wicking up through the units over and over.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Techo-Bloc roofing work in Orlando generally falls between $400 and $1,800 for a typical repair, with full roof deck paver replacement running higher depending on square footage and access. Here’s the breakdown we give every homeowner before work starts:
- Single paver or unit replacement: $400 – $700 installed, including matching the unit to the existing field and resetting the base beneath it.
- Section repair, including base correction and re-leveling: $800 – $1,500 depending on the number of units pulled and the condition of the layer underneath.
- Full roof deck paver replacement: varies by square footage and substrate condition; we price this per square foot after an on-site inspection.
Every estimate is written before any work starts, and the price we give you is the price you pay. No change orders for surprises we should have caught during the walkthrough. The workmanship on a repair like this is covered by our 365-Day Done Right Promise: if it’s not right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
You can safely check a few things yourself before calling. Is the failing unit loose enough to lift by hand? Is water pooling in an area it didn’t before? Take photos showing the problem in context, including the edges and any drains nearby. That helps us prepare before we arrive.
What we don’t recommend is pulling units yourself. Roof deck pavers sit on a layered system, and once you disturb the bedding layer, water gets in and the damage spreads faster than it would have otherwise. On a raised roof deck, the stakes are higher: water intrusion below the paver surface can compromise the waterproofing membrane beneath, and that’s a repair that multiplies in cost quickly. If you’re dealing with a roof deck, not a ground-level patio, let a professional open it up. Call us at (850) 920-7745 and tell me what the problem is. We’ll figure out the rest from there.
FAQs
Techo-Bloc pavers are manufactured to last decades, and in Orlando’s climate you can reasonably expect 20 to 30 years from the units themselves. The failure point is almost never the paver; it’s the base layer or drainage system underneath, which typically needs attention after 10 to 15 years of Florida rain, heat, and humidity. Call (850) 920-7745 and we’ll tell you honestly whether the paver or the system is the problem.
No, a cracked paver can’t be repaired in a way that will hold up on a roof deck; the thermal cycling and foot traffic will split any repair product within a season or two. We replace the damaged unit with a matched Techo-Bloc paver and reset the base beneath it so the replacement doesn’t fail the same way. Call (850) 920-7745 for a free estimate on single-unit or section replacement.
A typical single-unit or small section repair takes one day on site, including pulling the damaged units, correcting the base, and reinstalling the match. Larger section repairs may run two to three days depending on access and the condition of the layer underneath. We’ll give you a written timeline before any work begins.
We keep a working stock of common Techo-Bloc units and edge restraints on our trucks and in our Orlando yard, and we order less common series lines as needed, usually with a 3 to 5 business day lead time. If you need a discontinued unit matched, we’ll source a compatible current series and show you the difference before installing it.
Mason Remodeling Co Orlando also carries parts and materials for KraftMaid, Cambria, and Silestone products. Founded in 2004 as part of the Threshold Group family of home-service companies, we follow the Threshold Standard on every job: every crew member is background-checked, identity-verified, and arrives in a clean marked uniform with a photo ID badge. You’ll know the name and face of who’s coming before they reach your door. If a repair fails, we come back free of charge. No dispute process, no conditions.
Call (850) 920-7745 for a free estimate on your Techo-Bloc roof deck repair. A live person answers, any hour, any day.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
