Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Orlando Owner’s Guide
Therma-Tru fence installation in Orlando typically runs $3,500 to $9,000 fully installed, depending on the fence type, linear footage, and whether we’re matching existing panels or starting fresh. We stock Therma-Tru-compatible fence systems and can usually get your project scheduled within a week of the written estimate. Most Orlando homeowners discover they need fence work the same way: a post leans after a summer storm, a gate drags against the concrete, or a panel splinters where the sprinklers hit it every morning.
What makes Therma-Tru fence products different is the same thing that made their doors famous: composite and fiberglass-reinforced materials that don’t rot, warp, or attract termites the way traditional wood does. In Orlando’s humidity, that matters. A pine fence here might look tired after five or six years. A Therma-Tru fence is built to outlast two or three of those cycles.
Which Therma-Tru Models This Applies To
Therma-Tru doesn’t sell fences under a flashy model-name lineup the way they do entry doors. Their fence systems are sold through professional channels as Therma-Tru composite and vinyl fence lines, and the compatibility question is about finding the right profile, height, and post spacing, not matching a “Series 5400” tag. The key identifiers are the panel profile (flat, board-and-batten, or scalloped), the post cap style, and the rail-to-post connection hardware.
Here’s the compatibility gotcha most Orlando homeowners run into: Therma-Tru fence rails use a specific routed pocket system that only accepts Therma-Tru or licensed-compatible brackets. A generic big-box bracket will leave the rail loose and the gate will sag within a year. We carry OEM hardware and we also stock quality aftermarket equivalents from the same supply chain Mason Remodeling uses for other specification-grade lines, like KraftMaid cabinets, Cambria and Silestone surfaces. For fence work, the aftermarket brackets we use are load-rated to match the Therma-Tru spec, not guesses off a shelf.
One more thing worth knowing: if your existing fence is Therma-Tru but a section was damaged, we can match the replacement panel. If the fence was installed more than ten years ago, the color may have shifted slightly from sun exposure. We’ll flag that before ordering so you’re not surprised by a subtle mismatch.
Styles & brands we work with
Signs Your Therma-Tru Fence Installation Is Failing
- A post leans more than a few degrees after rain. This almost always means the post base wasn’t set deep enough for Orlando’s sandy, shifting soil. A proper Therma-Tru post here needs to sit below the frost line, which in Central Florida means a concrete footer at least 24 to 30 inches deep. Shallow posts heave every wet season.
- The gate scrapes the pavers or concrete when you open it. That’s a hinge or post cap issue. The hinge screws have likely wallowed out of the composite post, or the post itself has shifted. Tightening rarely fixes it; the acceptably permanent fix involves a new hinge mounting plate.
- Panels rattle in the wind along one section. The rail pockets are worn or a bracket cracked. Composite looks solid, but the connection points are the weak link. Once one bracket fails, the panel twists and puts load on the neighbors.
- You see hairline cracks at the bottom of a post. That’s UV and moisture cycling. Therma-Tru posts handle Florida sun well, but after 12 to 15 years, bottom-mounted posts sitting in standing water will eventually show stress cracks.
- The fence line sags between posts. This is a rail sag, and it means the rail was either undersized for the span or the routed pocket has worn loose. The fix is replacing the rail and sometimes the post caps, not shimming.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Orlando fence project, expect $3,500 to $9,000. On the lower end, that covers roughly 100 to 120 linear feet of a straight vinyl panel run with basic post caps and a single walk gate. On the higher end, you’re looking at 200-plus linear feet, composite panels instead of vinyl, multiple gates, or a section that requires concrete cutting to reset posts in an existing patio or driveway edge.
Here’s how the pricing breaks down in Orlando’s market:
- Partial repair (replace 2-4 posts, 1-2 panels): $600 to $1,600
- Single gate replacement with new hardware: $400 to $1,100
- Full fence replacement, 100-150 linear feet: $3,500 to $6,500
- Full fence replacement, 150-250 linear feet with multiple gates: $6,000 to $9,000
- Post reset (concrete footer, new mounting brackets): $150 to $350 per post
Every estimate from Mason Remodeling Co Orlando is a written price before any work starts. That number includes parts, labor, haul-away of the old fence, and the written guarantee. If you ever call us back because a repair or installation failed, the second visit is free. The 365-Day Done Right Promise covers the installation for a full year from the completion date. If the work isn’t right within that window, we make it right at no cost to you.
DIY or Call Us?
Fence work isn’t as dangerous as working on garage-door springs or live electrical panels, but it’s still heavy, awkward labor in Florida heat. A 6-foot vinyl panel isn’t light, and a post set wrong in sandy Orlando soil means redoing the whole section. What you can safely check yourself: whether a gate hinge screw is loose, whether a post cap is cracked, and whether panels are wicking moisture from a sprinkler head aimed directly at them. Those observations help us quote accurately over the phone.
What goes wrong with DIY here is the concrete work and the alignment. If a post footer is off by an inch, the gate binds. If the panel spacing isn’t right, it binds in the other direction. Isaac Pruett learned the trade at Los Angeles Trade-Technical College and has spent decades fixing exactly these mistakes. His line on the job site hasn’t changed: “Tell me what the problem is. We’ll figure out the rest from there.”
Call (850) 920-7745 and describe what you’re seeing. We’ll give you a straight answer about whether it’s a repair or a replacement, and what each costs.
FAQs
A properly installed Therma-Tru composite or vinyl fence in Orlando lasts 20 to 30 years for the panels and posts. The hardware, hinges, and brackets typically need attention every 8 to 12 years because they’re metal and they sit in salt air and humidity. That’s the part most installers don’t tell you.
Small scratches and minor surface marks can often be buffed or patched, but a cracked or splintered panel should be replaced. Therma-Tru panels are engineered as single units; a patch job on a structural crack will reopen within a season. Call (850) 920-7745 and we’ll tell you honestly which side of that line you’re on.
Most Orlando fence installations take two to three working days from start to finish, including old-fence removal. Post setting takes one day, panel and gate installation the next, and final hardware and cleanup wrapping by the third day. If concrete cutting is involved, add a day.
We stock common Therma-Tru brackets, post caps, hinge plates, and gate hardware on our trucks. Full panels and rails are ordered per job from our supplier once we know the exact profile and color. If you need a quote on a specific part, call (850) 920-7745 and we’ll price it from the current Orlando supplier inventory.
No. You get a written price before any work begins, and that’s the price. The only exception is if we discover something hidden, like a buried concrete footer that wasn’t visible at estimate time, and even then we’ll get your sign-off on additional work before proceeding. No surprise invoices.
Ready to talk fence? Call (850) 920-7745 and ask for a free estimate. You’ll get a real person on the line, a written price before any work starts, and the name and photo of the technician who comes to your door. That’s how we’ve operated in Orlando since 2004.
Written by Isaac Pruett, Owner, Mason Remodeling Co Orlando at Mason Remodeling Co Orlando, serving Orlando and nearby areas.
