Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Orlando?
Walk-in shower installation in Orlando typically costs between $4,500 and $12,000, with most homeowners paying around $7,500 to $8,500 for a standard 60-inch replacement that includes demolition, new plumbing, tile work, and a shower pan. The final price depends mostly on size, materials, and whether you’re converting a tub or rebuilding an existing shower footprint.
A tub-to-shower conversion, common in Orlando homes built in the 1980s and 1990s, lands closer to the lower end of that range, while a spacious custom build with floor-to-ceiling tile and frameless glass can push you past $12,000 without much effort. This guide breaks down exactly what you’re paying for in the Orlando market in 2026, so you can budget with actual numbers instead of guesswork.
- Typical range: $4,500 – $12,000
- Average project: $7,500 – $8,500
- Entry-level tub-to-shower conversion: $3,500 – $6,500
- Low-maintenance acrylic surrounds: $3,000 – $5,000
- Custom tile with glass enclosure: $8,000 – $15,000+
Mason Remodeling Co Orlando has been building walk-in showers in Central Florida since 2004, and we put a written price in front of every homeowner before any demolition starts. No verbal ballparks that drift upward. No surprise change orders. You’ll know the number before a single tile is set.
Walk-In Shower Installation Cost Breakdown (2026)
Here’s what a walk-in shower installation actually costs when you separate the work into its components. These are the numbers we see on real Orlando projects in 2026, not national averages that don’t reflect Florida labor rates or material availability.
| Component | Cost Range (Orlando, 2026) |
|---|---|
| Demolition and disposal of old tub/shower | $400 – $900 |
| Plumbing rough-in (moving drain, new valve) | $800 – $2,500 |
| Shower pan installation (acrylic or tile-ready) | $500 – $1,800 |
| Waterproofing (Schluter Kerdi or equal) | $600 – $1,400 |
| Wall tile and labor (standard 12×24 porcelain) | $1,800 – $4,500 |
| Shower door or glass enclosure | $600 – $2,500 |
| Fixtures (valve, showerhead, handheld) | $300 – $1,500 |
| Permits and inspection | $200 – $600 |
A few things push a walk-in shower to the top or bottom of that range. The biggest driver is tile. Subway tile at $3 per square foot costs dramatically less to install than large-format porcelain or natural stone, and the labor difference can be $1,000 or more on an average Orlando shower. Frameless glass, which requires custom fabrication, adds $1,200 to $2,500 depending on the opening. And if your home’s drain sits in concrete slab, which is the reality for most single-story Orlando houses built after 1970, moving it for a center-drain shower pan costs more than in pier-and-beam construction.
We source our materials through home renovation partnerships with brands like Kohler, Moen, and Schluter, which means the products we install are specification-grade rather than whatever is on the shelf at a big-box store. You get manufacturer warranties on fixtures and our written guarantee on the installation itself.
What Affects Walk-In Shower Installation Pricing in Orlando
Every Orlando neighborhood has its own housing stock, which means cost variables change depending on where you live. Here’s what actually moves the price in this market:
- Slab foundation versus raised floor. Homes in Dr. Phillips, Windermere, and Winter Park often sit on slab, which means drain relocation requires concrete cutting. That’s a $500 to $1,200 line item you won’t see in older homes with crawlspaces.
- Bathroom footprint and existing layout. A 5-foot tub replacement is the most economical job because the drain and supply lines are already close. A shower expansion that steals space from a linen closet or vanity means framing, drywall, and plumbing rerouting.
- Waterproofing method. We use Schluter Kerdi membrane, which is a sheet waterproofing system typically $600 to $1,400 for a standard shower. Some contractors skip this or use a cheaper roll-on liquid applied too thin. Moisture is a serious problem in Orlando’s humidity; cutting this corner is a bad savings.
- Glass enclosure style. A simple sliding door costs less than a pivot hinge panel, and a two-panel frameless setup costs more than a single fixed panel. Custom glass fabrication in the Orlando metro runs $60 to $120 per square foot installed.
- Tile choice and pattern. Standard subway or 12×24 porcelain laid in a grid is the most affordable. Herringbone, hexagon, or vertical stack patterns require more cuts and more labor. Natural stone means sealing and careful handling.
- Fixture grade. A basic pressure-balance valve and showerhead from a builder-grade line runs under $300 total. A thermostatic valve with a rain head, handheld, and body jets from Kohler or Grohe can hit $2,500 in materials alone.
One more Orlando-specific factor: aging plumbing. Homes in Colonialtown, Audubon Park, and other pre-1980 neighborhoods often have galvanized supply lines or 1.5-inch drains that don’t meet current code for shower flow rates. If your shower project uncovers old cast iron or polybutylene, the plumbing scope grows. A good contractor prices that risk honestly up front rather than hitting you with a mid-project “unforeseen condition” invoice.
That’s why Mason Remodeling Co Orlando delivers a written price before any work starts. We inspect the space, check the plumbing, and put the number on paper. If something is discovered during demo, we talk to you before spending another dollar, and you approve any adjustment in writing. Isaac Pruett, the owner behind our Orlando operation, has seen too many homeowners burned by open-ended verbal estimates, so our process removes that risk entirely.
Walk-In Shower Installation Options and Typical Orlando Price Points
Three general tiers cover most of the walk-in shower work we do in the Orlando metro. Here’s what each includes and what it costs.
Tier 1: Acrylic or Fiberglass Surround – $3,500 to $5,500
This is the fastest and most affordable route. The existing tub or shower comes out, the plumbing gets updated with a new valve, and a manufactured wall surround and shower pan go in. Expect one to three days of work. These surrounds are durable and easy to clean, but you’re limited to a few standard patterns and sizes. For a guest bathroom in Lake Nona or a rental property near UCF, this is the smart choice.
Tier 2: Tile Shower with Shower Pan – $5,500 to $9,000
The most common project we install. This includes full demolition, plumbing work, a pre-formed or tile-ready shower pan, waterproofing, and tile on the walls up to the ceiling. Most homeowners choose a built-in niche and a single sliding or hinged glass door. This is where the $7,500 Orlando average lives. You get real tile customization, a solid waterproofing system, and a shower that looks like it belongs in a designed bathroom rather than a spec build.
Tier 3: Custom Tile, Curbless Entry, Frameless Glass – $9,000 to $15,000+
A curbless walk-in shower with a linear drain, large-format tile, and a frameless glass panel is the top end of Orlando walk-in shower pricing. These projects often involve moving the drain to one side, sloping the floor properly, and sometimes reinforcing the subfloor. In neighborhoods like Baldwin Park and Winter Park, where accessible aging-in-place design is increasingly requested, this option is also the most future-proof. A curbless shower means no step-over threshold, which matters if you’re planning to stay in the home for decades.
For more detail on what each option involves, see our full guide on Walk-In Shower Installation in Orlando.
How to Save on Walk-In Shower Installation
Here’s how to keep a walk-in shower in Orlando at the lower end of that $4,500 to $12,000 range without cutting corners that come back to haunt you.
- Keep the drain where it is. If your current tub or shower drain works, leaving it in place avoids slab cutting and drainage rework. Center-drain shower pans are less expensive, and the labor savings are significant.
- Choose a stock shower pan over a custom mortared tile floor. A factory-made acrylic or foam pan costs $300 to $700 and installs in hours. A custom mortar bed with tile costs $1,200 to $2,200 and takes a day or more. Both last; one just costs more in labor.
- Limit the glass. A single fixed panel or a standard sliding door costs half of a two-panel frameless enclosure. If your budget tightens, a shower curtain works temporarily, and you can add glass later without disturbing the tile.
- Use porcelain over natural stone. Quality porcelain tile looks close to marble at a third of the material cost and requires no periodic sealing. Orlando’s well water can stain unsealed natural stone quickly.
- Do the demo yourself only if you really know what you’re doing. Removing tile and drywall saves $400 to $900 in labor, but damaging a water line or hitting an electrical run behind a wet wall costs more than you save. For anything involving plumbing or framing, leave it to a pro.
Get an exact written quote for your specific bathroom by calling (850) 920-7745. Estimates are free, and the number we give you is the number you’ll pay. No adjustment games at the end of the job.
Is a Walk-In Shower Installation in Orlando Worth the Cost?
If you’re planning to stay in your home for five or more years, yes. A walk-in shower removes the largest trip hazard in most Orlando bathrooms, simplifies cleaning compared to a tub surround, and updates a dated space that buyers in 2026 increasingly expect. In the Orlando resale market, bathrooms are consistently one of the top three rooms buyers look at first, and a clean walk-in shower typically outperforms an original builder-grade tub at appraisal.
The 365-day guarantee also matters here. We call it the 365-Day Done Right Promise. If anything we installed is not right within one year of the completion date, we come back and make it right at no cost to the homeowner. Not prorated. Not subject to a “dispute process.” A year of coverage, written plainly, with a free return visit if something fails.
Who Is Coming to Your Home
Most Orlando homeowners tell us the same thing: opening the door to a contractor is a safety decision before it’s a budget decision. That’s especially true for people who are often home alone, parents with young kids, and older adults who expect a stranger in the house only when they’ve been verified.
Every Mason Remodeling Co Orlando technician follows The Threshold Standard. Before the visit, you receive the technician’s name and photo by text or email. When they arrive, they’re in a clean, marked uniform and carrying a photo ID badge that matches the name you were given. Every crew member is background-checked and identity-verified before they’re ever assigned to a job. No subcontractor roulette. No “someone will show up sometime Thursday.” You know who is coming, and you’ll recognize them at the door.
If you call at 2 a.m. with a question about an upcoming project or a completed one, a live person answers. Not a call tree. Not a voicemail that gets returned Monday. 24 hours a day, 7 days a week, including weekends and holidays.
FAQs – Walk-In Shower Installation Cost in Orlando
How much does a walk-in shower cost in Orlando in 2026?
A walk-in shower costs $4,500 to $12,000 in Orlando in 2026, with the average project landing around $7,500 to $8,500. Entry-level acrylic surrounds start near $3,500, while custom tile with curbless entry and frameless glass can exceed $15,000. Call (850) 920-7745 for a free written estimate on your specific bathroom.
Is it cheaper to install a walk-in shower or keep the tub?
Installing a basic walk-in shower costs $3,500 to $5,500, which is comparable to replacing an old tub with a new one, but a tile walk-in shower runs $5,500 to $9,000, which costs more than a standard tub replacement. The trade-off is long-term value: walk-in showers appeal to more Orlando buyers in 2026 and eliminate step-over risk for aging-in-place homeowners.
Can you install a walk-in shower in one day?
An acrylic or fiberglass surround can sometimes be installed in one day, but a tile walk-in shower takes three to seven days because each step, from waterproofing to tile setting to grout curing, needs time. Any contractor promising a one-day tile shower is cutting a required curing step. Call (850) 920-7745 and we’ll give you a realistic timeline for your project.
Does a walk-in shower increase home value in Orlando?
A walk-in shower typically increases resale appeal in the Orlando market, especially when it replaces an original builder-grade tub in the primary bathroom. While return on investment varies by neighborhood, homes in College Park, Thornton Park, and other renovation-heavy areas sell faster when the primary bath is updated. The bigger return is daily use: zero step-over hazard and easier cleaning.
What’s the most expensive part of a walk-in shower installation?
The tile and tile labor is the most expensive single component, running $1,800 to $4,500 for a standard Orlando shower. Plumbing relocation comes second at $800 to $2,500, especially when a slab foundation requires concrete cutting. Glass enclosures range from $600 to $2,500 depending on whether you choose stock or custom frameless.
Do I need a permit for a walk-in shower in Orlando?
Yes, a plumbing permit is required when you move or replace drain lines or the shower valve, which applies to nearly every walk-in shower installation in Orlando and Orange County. The permit and inspection typically cost $200 to $600. A licensed contractor pulls the permit and schedules the inspection; an unlicensed handyman usually cannot, which is one more reason to hire a state-licensed pro.
Get Your Written Walk-In Shower Estimate
You don’t need to guess what a walk-in shower will cost in your Orlando home. Call (850) 920-7745 and a live person will answer, schedule your free in-home estimate, and put a written price in your hands before you commit to anything. Isaac Pruett and the Mason Remodeling Co Orlando team have served Central Florida since 2004, and every project starts the same way: a real number on paper, a verified crew at your door, and a 365-day written guarantee that means exactly what it says.
Pricing reflects the Orlando market as of 2026. Mason Remodeling Co Orlando offers free estimates – call (850) 920-7745.
What Our Customers Say
"Written scope, fixed price, and weekly updates. No change orders we hadn't agreed to."
- Carlos H."Bathroom gut job. Replaced the old tub with a walk-in shower and added a niche. Waterproofing was done properly with a flood test before tile."
- Greg L."Great quality tile work. The countertop template slipped by a week, but the project lead explained and kept us updated."
- Susan Y.
