Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Orlando Homeowners Choose Therma-Tru Construction
We provide independent Therma Tru in Orlando door installation, repair, and replacement service, and our crews work on these entry systems every week. Therma-Tru builds fiberglass and steel entry doors that hold up better than wood in Central Florida’s humidity, but they still develop specific problems here – sun-bleached finishes, warped slabs, seals that fail during rainy season. We fix those problems with OEM-compatible parts and honest advice on when a door is worth saving versus replacing. Call (850) 920-7745 for a free estimate on any Therma-Tru service in Orlando.
We are not authorized by Therma-Tru, and we won’t pretend otherwise. What we are is a remodeler that has installed and repaired enough of their doors in Orlando to know exactly how they behave after five or ten summers of heat, rain, and hurricane-season humidity. If you own a Therma-Tru door, you need someone who knows the product line and the local climate. That’s us.
Why Trust Mason Remodeling Co Orlando for Your Therma-Tru Construction?
Isaac Pruett, our owner, learned the trades at Los Angeles Trade-Technical College and has spent decades on job sites where a door that doesn’t latch properly is a call-back waiting to happen. He’s drilled the same standard into every Mason Remodeling Co Orlando technician: know the product, diagnose before you touch anything, and write down the price before the work starts.
When it comes to Therma-Tru specifically, our Orlando crews have worked on the Fiber-Classic Mahogany Collection, Smooth-Star fiberglass lines, the Pulse Series, and Benchmark by Therma-Tru doors in homes from College Park to the planned communities west of town. We know which hinge sets those models use, how the factory weatherstripping wears in Florida sun, and what a bowed fiberglass slab looks like before the homeowner even notices the draft. We carry OEM-compatible Therma-Tru hinges, thresholds, and weatherstripping so we can typically complete a repair in one visit without ordering parts and leaving your front door compromised for a week.
Every technician who arrives at an Orlando home for Therma-Tru work is background-checked, identity-verified, in a clean marked uniform, and carrying a photo ID badge. You’ll get their name and photo before they show up. That’s the Threshold Standard, and it applies to every door we touch.
Styles & brands we work with
Common Therma-Tru Construction Problems We Fix in Orlando
After years of service calls across Orlando, we see the same issues repeat. Here are the five most common Therma-Tru problems we address, with the real causes behind them:
- Warped or sagging door slabs on Fiber-Classic and Smooth-Star models. Orlando’s humidity and direct afternoon sun cause fiberglass skins to expand and contract. Over time, a south-facing or west-facing entry door can bow by a quarter inch or more. The door still looks fine from the street, but it won’t seal against the weatherstripping, and the latch starts missing the strike plate. A Dr. Phillips homeowner called us because their Therma-Tru Fiber-Classic door wouldn’t latch after a humid summer. Our tech found the slab had bowed nearly 3/8 inch, so we replaced the hinges and adjusted the strike plate, restoring a clean latch and eliminating the hallway draft.
- Faded or chalked factory finishes on fiberglass skins. Therma-Tru uses a factory-applied finish that resists fading well, but Orlando’s UV index is merciless. After six to eight years, many doors show visible chalking on the surface. The good news is these skins hold paint far better than wood. We prepare the surface properly and repaint with exterior-grade acrylic that handles Central Florida sun.
- Worn or cracked weatherstripping and door sweeps. This is the most common call we get, especially after Orlando’s afternoon thunderstorm season starts. The factory Q-Lon weatherstripping Therma-Tru uses is good, but it wears out. When it cracks, you get drafts, water intrusion at the threshold, and higher cooling bills. We replace it with Therma-Tru-spec weatherstripping matched to the door model.
- Misaligned hinges and latch strike plates from settling slabs. Florida homes settle. Concrete block homes shift slightly with soil movement, and wood-frame stucco homes flex with humidity cycles. When the framing around an entry door moves even an eighth of an inch, the door’s latch alignment goes with it. We adjust or replace hinges, reset strike plates, and sometimes install longer screws into the rough opening to anchor the frame.
- Threshold failures on older Benchmark doors. The Benchmark by Therma-Tru line is a budget-friendly option, but its adjustable thresholds wear faster in Orlando’s heat and rain. We see cracked aluminum threshold caps and failed compression seals that let water pool inside the entryway during heavy storms. Replacement is straightforward when caught early; ignored, it leads to subfloor rot.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We prefer OEM Therma-Tru hinges, thresholds, and weatherstripping. The tolerances on these parts are designed to work together, and mixing in a generic hinge set from a big-box store can create a slight offset that makes the door bind or the weatherstripping rub unevenly. We stock common Therma-Tru replacement parts in our Orlando shop so most hinge, threshold, and weatherstripping repairs happen same-visit.
That said, we’ll tell you straight when a replacement makes more sense than a repair. If a fiberglass slab has bowed more than a quarter inch, no hinge adjustment will fix the seal. If the door skin has cracked through, water is getting inside the composite core and the door is degrading from within. In those cases, we recommend a full replacement and help you pick a Therma-Tru model that fits your existing rough opening. The written price you get from us before work starts will reflect that honest call – repair if it’ll last, replace if it won’t. Call (850) 920-7745 and we’ll assess your door in person.
Our Therma-Tru Service Process – Step by Step
Here’s how a Therma-Tru service call works with us in Orlando:
- 1
Diagnosis. We inspect the slab, hinges, weatherstripping, threshold, and strike plate as a system, not as isolated parts. On Therma-Tru doors, a latch problem is usually a symptom of a slab alignment issue or a settled frame, so we trace the symptom to the root cause before quoting anything.
- 2
Repair or replacement. We use OEM-compatible Therma-Tru parts for all hinge, threshold, and weatherstripping work. If the door requires replacement, we order the correct model and size for your rough opening and schedule the install when the door arrives.
- 3
Testing and adjustment. After any repair or install, we cycle the door twenty times or more. We confirm the latch engages cleanly, the weatherstripping compresses evenly around all four sides, and the threshold seal makes full contact. We also check that the door swings freely without rubbing.
- 4
Warranty and follow-up. Every Therma-Tru job we complete in Orlando is covered by our written guarantee for 365 days from the completion date. If anything we touched fails within that year, we return at no charge and make it right. That’s the Done Right Promise, and it’s written on every invoice.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Orlando
Our Orlando crews work on the full Therma-Tru residential lineup. We service and install the Fiber-Classic Mahogany Collection, which mimics wood grain so well that homeowners regularly ask us if it’s actually wood. We handle Smooth-Star fiberglass doors, the Pulse Series with its modern square-edge profiles, and Benchmark by Therma-Tru entry systems for budget-conscious replacements. Our Orlando shop keeps common hinge sets, Q-Lon weatherstripping, and adjustable thresholds in stock for these lines, which means faster turnaround when your door needs attention during Florida’s rainy season.
Beyond doors, our crews handle full kitchen remodeling, window replacement, and roof repair, so if your Therma-Tru project is part of a larger renovation, hiring us as your General Contractor means one call covers it.
We Also Service These Brands
Therma-Tru is a specialty of ours, but it’s not the only brand we work with. Mason Remodeling Co Orlando installs and services KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler, Moen, and Toto fixtures. If your Orlando remodel involves multiple product lines, we handle the whole project as one coordinated job with one written price.
FAQs – Therma-Tru Construction Service in Orlando
Is Mason Remodeling Co Orlando authorized by Therma-Tru?
No. We are an independent Therma-Tru service provider in Orlando. We are not factory-authorized, and we don’t claim to be. What we bring is hands-on experience with Therma-Tru doors in Central Florida conditions, OEM-compatible parts, and a written guarantee on every job. If you’re comparing us to a factory-authorized dealer, ask what that authorization actually includes – in most cases, it doesn’t change the parts used or the quality of the installation.
Do you use genuine Therma-Tru OEM parts?
Yes, for hinges, thresholds, and weatherstripping, we use OEM Therma-Tru parts because the tolerances matter. A generic hinge that’s off by a millimeter creates a door that binds or seals unevenly. We stock these OEM parts locally in Orlando so most repairs don’t require a second visit. Call (850) 920-7745 and we’ll confirm what your door needs.
How long does Therma-Tru service take in Orlando?
Most hinge adjustments, strike plate resets, and weatherstripping replacements take one to two hours on site, and we typically complete them in a single visit because we carry the common parts on our trucks. A full door replacement takes longer, usually two to four weeks from order to installation, depending on the model and size. We’ll give you a clear timeline in writing before any work begins.
What does it cost to fix a Therma-Tru door in Orlando?
| Service | Price Range |
|---|---|
| Therma-Tru entry door replacement (installed) | $1,800 – $4,500 |
| Hinge and strike plate adjustment | $150 – $350 |
| Weatherstripping and door sweep replacement | $100 – $250 |
Call (850) 920-7745 for an exact quote. Estimates are free.
Can Therma-Tru fiberglass doors be repainted, and how do you ensure the finish lasts in Orlando’s sun?
Yes, Therma-Tru fiberglass doors repaint well, and in Orlando, a fresh coat every five to seven years is realistic maintenance for a south-facing or west-facing door. We clean and lightly sand the surface to remove chalking, apply a bonding primer, then use a 100% acrylic exterior paint with UV inhibitors. We don’t use dark colors on sun-exposed doors in Orlando – dark finishes absorb heat and accelerate surface breakdown.
How do I know if my Therma-Tru door needs realignment or a full replacement?
If your door sags but the slab itself is flat and the skin isn’t cracked, realignment usually solves it. We check the reveal gaps around all four sides when the door is closed. If the top or latch-side gap is uneven by more than 1/8 inch, it’s usually a hinge or frame issue. If the slab is bowed or the fiberglass skin has visible cracks, replacement is the honest answer. Call (850) 920-7745 and we’ll assess it for free.
My Therma-Tru door swells and sticks during the rainy season. Is that normal?
Therma-Tru fiberglass doors don’t absorb moisture like wood doors do, so swelling is not normal for the slab itself. What often happens in Orlando is that the rough opening’s wood frame absorbs humidity and expands, pressing against the door frame. We resolve this by adjusting the frame and sometimes planing a small amount from the door edge. If your door is sticking every summer, don’t force it – forcing a misaligned Therma-Tru door will crack the fiberglass skin at the stress point.
Book Your Therma-Tru Service in Orlando, FL
Tell me what the problem is. We’ll figure out the rest from there. Call (850) 920-7745 to schedule your free Therma-Tru estimate in Orlando, and we’ll put the price in writing before any work starts.
Written by Isaac Pruett, Owner at Mason Remodeling Co Orlando, serving Orlando since 2004.
